Page 29: of Maritime Reporter Magazine (December 2004)

Great Ships of 2004

Read this page in Pdf, Flash or Html5 edition of December 2004 Maritime Reporter Magazine

Great Ships of 2004

Ship Name Monte Cervantes

Ship Type Container Ship

Ship Owner Hamburg-Slid

Ship Builder DSME

Monte Cervantes is a containership constructed by

DSME, Okpo Shipyard for Hamburg-Sud under the survey of Germanisher Lloyd.

The vessel has a fully welded upper deck with fore- castle, aft sunken deck, a raked stem with bulbous bow, a transom stern with open water type stern frame, a semi-balanced rudder and a fixed pitch propeller directly driven by a slow speed diesel engine.

The vessel has been built generally as double skinned construction in way of cargo holds and arranged with 7 cargo holds. The number of containers with 14 tons is 4,000 TEU at the scantling draft. The Vessel has been designed and built to meet the Classification Notations of : 100 A5 E, "Container Ship", IW, +MC E, AUT,

RCP 1085/25, "SOLAS II-2, Reg. 19.

The cargo holds are equipped with cell guides and support structure for the carriage of 40 ft ISO contain- ers, 14 rows and 8 tiers of 9.5 ft. high containers in general. All the stringers and container platforms in cargo area has been designed based on a container height of 9.5 ft. The cell guide structure and strength have been designed to permit flexible stowage of con- tainers of different height (8 ft 6 inch and 9 ft 6 inch) in every composition.

Loading of 20 ft containers up to 7 tiers above inner bottom has been considered in the 40 ft cell guide.

A total 1,365 electric receptacles for refrigerated con- tainers (665 in holds and 700 on deck) has been arranged. One (1) access gastight steel door has been fitted on longitudinal bulkhead at transverse box gird- er in way of each reefer bay. Total stack load on each hatch cover is 120 metric tons for 40ft and 100 metric tons for 20ft containers. For block stowage, total stack load on each hatch cover shall be 68.5 metric tons.

Electric power generating plant is consist of four(4) diesel generators and one( 1) emergency generator.

Ship Name Minerva Lisa

Ship Type Crude Oil Tanker

Ship Owner Minerva Marine

Ship Builder Samsung Heavy Industries

Minerva Lisa is the fourth vessel of Minerva 105,000 DWT Crude Oil Tanker series. The vessel is built according to ABS Ice Rule and granted the qualification of Ice 1A for Hull and Ice 1C for

Propulsion by ABS.

Main Particulars

Flag

Class .Greek ..ABS

Length, (o.a) 798.9 ft. (243.5 m)

Length, (b.p.) 764.4 ft. (233 m)

Breadth, (molded) 137.8 ft. (42 m)

Depth, (molded) 69.9 ft. (21.3 m)

Draft, (designed) 44.6 ft. (13.6 m)

Draft, (scantling) 48.6 ft. (14.8 m)

GT 58,156

DWT, (at design draft) 93,209 MT

DWT, (at scantling draft) 103,755 MT

Speed 15.45 kts

Accommodation 5Ttiers (29+IP)

Main engines HSD MAN B&W 7S60MC License made

Total installed power 14,280 kW

Auxiliary engines MAN B&W 6L21/31, 3sets

Propellers FPP, 4 blades

Bow Thrusters Brunvoll (1,500 kW)

Generators Hyundai (HFC6 564-84K-HSD. 1225KVA, 900 rpm)

Engine controls KMK-Norcontrol

Deck machinery 8-Mooring winches (20MTx 15m/min)

Coatings Sigma

Cargo control system, Ballast control system Shinko

Radars 3, JRC/JMA-9833-SA, JMA-9823/2-7XA

Depth Sounders, Radios, GPS JRC/JFE-582

Auto Pilot TOKIMEC/PR-6531A-DT-SS

GMDSS, AIS, Weatherfax, Plotters, Satcom JRC

Fire detection system Consolium Marine AS/NSAC-1

Motor starters Samsung Heavy Industries

Tank Capacities (100% full)

Water Ballast Tanks 40,000 cu. m.

Heavy Fuel Oil Tanks 3,670 cu. m.

Diesel Oil Tanks 160 cu. m.

Fresh Water Tanks 430 cu. m.

HYDRAULIC

STEERING

Hugged & Reliable

Wagner Steering Systems range from manual hydraulic to full power follow-up. They are ideally suited for all types of vessels up to 500'

Summer Equipment Ltd 7983 Progress Way, Delta V4G 1A3, Canada

PH 604 940 4545, Fax 604 940 4566 [email protected]

FOR DETAILS VISIT www.wagnersteering.com

Circle 238 on Reader Service Card

MARINE EQUIPMENT, INC.

Offering a complete line of deck machinery as well as general fabrication, machining services, installation, maintenance and repair services.

Stennis Space Center, MS 39529-7099

Phone (228) 813-1700 Fax (228) 813-1709

E-Mail:[email protected] www.coastalmarineequipment.com

Circle 208 on Reader Service Card

MARINE HXI1AUST SYSTEMS

OF ALABAMA INC.

P.O.Box 698 757 Nichols Ave

Fairhope, AL 36533

I-251-<>28-1234

Phone/Fax

Mesamarinefa Earthlink.net http://www.mesamarine.com

Water Cooled Manifolds, Heat Exchangers, Collector

Risers, Mufflers, and Custom Fabrication for Caterpillar,

Cummins, Onan, Detroit, Perkins, Waukesha,

Westerbeke, Hercules, Mack, Isuzu, John Deere, Kubota,

Daewoo, Isotta Fraschini, Ford, Palmer, International,

Fairbanks Morse, Lister, Wisconsin, and more.

Marinization, Repair, and Duplication of Obsolete Parts available upon request.

Please Contact us for all of your exhaust needs.

Circle 226 on Reader Service Card

December 2004 29 a good name in industry

Circle 214 on Reader Service Card

The "Best Value" for new vessels or re-powers!

Maritime Reporter

First published in 1881 Maritime Reporter is the world's largest audited circulation publication serving the global maritime industry.