Aluminum Stainless Inc

  • A new 2-inch stainless-steel submersible pump has been introduced by Multiquip Inc., Carson, Calif. The model ST-2005S is constructed of 304 stainless steel, and is ideally suited for the petrochem, agrichem, chemical, and marine applications where hostile liquids traditionally exist.

    In typical construction dewatering applications, the new pump promises up to four times the life of cast iron or aluminum pumps.

    Literature is available describing the unit which incorporates a y2 horsepower electric motor, operating at 115 volts/60 Hz.

    Thermal overload protection and double oil-filled seals are standard features. The pump comes complete with a 25-foot cable and measures 7*4 inches diameter by I6I/0 inches high.

    For more information, Write 41 on Reader Service Card

  • . A special feature of the boat is the 36-inch wide, V2- inch thick push knees fabricated by the shipyard. The main cabin and pilothouse are of aluminum construction, which gives the boat a lower center of gravity. Another advan- tage of the aluminum construction will be in the minimum maintenance

  • , etc. The color publication, complete with a table of contents, is divided into 13 sections, with information on the more than 20,000 stainless steel, aluminum, brass, silicon bronze, monel™ and nylon fasteners in stock at Action Threaded Products. Each section contains a brief description on the advantages

  • The 38-foot aluminum crewboat Matmar Drill III was delivered recently by Kings Craft, Inc., Florence, Ala., to Matagorda Marine Drilling Company of Corpus Christi, Texas. She is the third of four aluminum vessels built at the yard for the same owner. All four boats are 38 feet long by 13-foot beam

  • is used to give the best insulating values. Models with a freezer feature an automatic defrost system. Other options available include aluminum finish for weight savings or nonmagnetic considerations. In addition to the modular refrigerators, Cospolich manufactures standard models comprised

  • a customer's design with material specification such as carbon steel, Avondale stainless steel, manganese bronze, nickel manganese bronze and nickel aluminum bronze. To receive a free copy of this informative and well-written brochure on Avondale propellers, C i r c l e 70 on Reader Service Car

  • . The concept involves a duplex stainless steel jet pump, adding in mixed-flow technology with minimum tip clearance and inboard hydraulics mounted in an aluminum frame – an attractive package suitable for all high-speed applications.        www.marinejetpower.com (As published in the November 2014 edition

  • A new brochure describing the c o m p a n y ' s line of flush deck hatches is available from Bomar, Inc. These hatches feature a heavy cast aluminum top with reinforcing ribs and a y^-inch-thick base ring. Deck openings of 20-inch diameter and 15 by 24-inch are available, and inside or outside open

  • Aluminum Popularity Growing Fast Among Diverse Group of Boat Builders Aluminum has been used in the marine industry for more than 100 years because of its light weight and ease of fabrication combined with good corrosion and fatigue resistance. However, for much of the past 30 years, fiberglass has

  • ,500 pounds each. The oiler propeller is a seven-blade design that will weigh approximately 68,000 pounds. Both types will be cast in nickle-aluminumbronze. Navsea has also exercised an option for four additional guidedmissile frigate (DLG-16 Class) propellers, bringing to 10 the total to be

  • . That vessel was delivered to the U.S. Navy in 1968, and later operated with the U.S. Coast Guard on the East and West Coasts. The 84-foot, all-aluminum Israeli boat will be capable of speeds of 50 knots when foilborne and eight knots when operating on its hull. A 5,400-hp Allison 501-KF gas turbine

  • box which eliminates the traditional problems of on-board wet waste (edibles excluded). Multi- Pak machines also bale cardboard, paper, and aluminum cans (subject to resale), and can bag plastics and other waste into plastic bags designed for the Multi-Pak equipment. The boxes, bags, or bales

  • MR Nov-19#96 MR NOV 2019_Index_revised2:Layout 1  11/7/2019  9:15 PM)
    November 2019 - Maritime Reporter and Engineering News page: 96

    MR NOV 2019_Index_revised2:Layout 1 11/7/2019 9:15 PM Page 1 ADVERTISER INDEX Page#Advertiser Website Phone #Page#Advertiser Website Phone # 55Advanced Mechanical Enterprises .www.amesolutions.com . . . . . . . . . . . . . . . . .(954) 764-2678 C3KE Marine / Worldwide Diesel . . . . .www.kemarine.com . .

  • MR Nov-19#93 MR
                                          Professional)
    November 2019 - Maritime Reporter and Engineering News page: 93

    MR Professional www.MaritimeProfessional.com Technology Associates, Inc. Bringing Engineering to Successful Fruition ? Naval Architecture Services ? Marine Engineering s

  • MR Nov-19#92 MR
Professional www.MaritimeProfessional.com)
    November 2019 - Maritime Reporter and Engineering News page: 92

    MR Professional www.MaritimeProfessional.com 813-654-9800 INFO@BMDINC.COM BOKSAMARINEDESIGN.COM DESIGN NAVAL ARCHITECTURE ENGINEERING• • Established in 1854 CRANDALL DRY DOCK ENGINEERS, INC. s#ONSULTING

  • MR Nov-19#90 This directory section is an editorial feature published)
    November 2019 - Maritime Reporter and Engineering News page: 90

    This directory section is an editorial feature published in every issue for the convenience of the readers of MARITIME REPORTER. A quick-reference readers’ guide, it includes the names and addresses of the world’s leading manufacturers and suppliers of all types of marine machinery, equipment, supplies and

  • MR Nov-19#83 ?
%RDW/,)(DGLYLVLRQRI/LIH,QGXVWULHV proud manufacturers of)
    November 2019 - Maritime Reporter and Engineering News page: 83

    ? %RDW/,)(DGLYLVLRQRI/LIH,QGXVWULHV proud manufacturers of boat sealants, cleaners, compounds, waxes and epoxies, is now celebrating 60 years in the marine industry. With a longstanding reputation for quality, affordability, and trust, we are pleased to serve various marine industries on an ongoing basis.

  • MR Nov-19#79  debris protection. 
The all aluminum hulls will be powered)
    November 2019 - Maritime Reporter and Engineering News page: 79

    5.3 m with a special hard chine semi-displacement hull designed for river service and ? tted with twin open style skegs for debris protection. The all aluminum hulls will be powered by two 560 kW 6135SFM85 John Deere main engines for a speed of 20 knots. Reduction gears will be Reintjes WAF 244 with 2

  • MR Nov-19#74 E
EMISSION REDUCTION TECH FILES
Schottel Propulsion for)
    November 2019 - Maritime Reporter and Engineering News page: 74

    E EMISSION REDUCTION TECH FILES Schottel Propulsion for Emission-Free Push Boat The agreement between Wärtsilä and Norsepower will pro- mote the use of Rotor Sails & support sustainable shipping. Wärtsilä, Norsepower Sign Agreement The technology group Wärtsilä and Norsepower, a provider of low maintenance

  • MR Nov-19#67 VOICES BORIANA FARRAR, VP, SENIOR CLAIMS EXECUTIVE &)
    November 2019 - Maritime Reporter and Engineering News page: 67

    VOICES BORIANA FARRAR, VP, SENIOR CLAIMS EXECUTIVE & COUNSEL, AMERICAN P&I CLUB SCI Mountain Challenge teammates (L to R): Boriana Farrar, Jeanne Grasso and Blythe Daly from WISTA USA. New Jersey chapter for ? ve years.” The more things change … While the progress has been steady, she still While this

  • MR Nov-19#66 VOICES BORIANA FARRAR, VP, SENIOR CLAIMS EXECUTIVE &)
    November 2019 - Maritime Reporter and Engineering News page: 66

    VOICES BORIANA FARRAR, VP, SENIOR CLAIMS EXECUTIVE & COUNSEL, AMERICAN P&I CLUB Trailblazer Boriana Farrar is a familiar face in maritime circles, the Vice President and Counsel and a Senior Claims Executive and Business Develop- ment Director for the Americas at the Ship Owners Claims Bureau, Inc.

  • MR Nov-19#55 ENVIRONMENTAL GREEN SHIP RECYCLING
states when the recipient)
    November 2019 - Maritime Reporter and Engineering News page: 55

    ENVIRONMENTAL GREEN SHIP RECYCLING states when the recipient country cannot though not rati? ed by the requisite num- be required to have an initial survey to been uniquely tailored to the vessel. deal with the waste in line with the Con- ber of countries representing 40% of verify the inventory of

  • MR Nov-19#47 SHIPBUILDING USCG POLAR SECURITY CUTTER
vessel to reach)
    November 2019 - Maritime Reporter and Engineering News page: 47

    SHIPBUILDING USCG POLAR SECURITY CUTTER vessel to reach the North Pole unaccom- transits to get on station and conduct Mardiros. The number one mission for panied—but it is designed primarily for operations with limited or no logistics the new PSC will be to carry out the an- Meet The “Fleet” scienti?

  • MR Nov-19#16   most suitable materials were aluminum 
very early engineering)
    November 2019 - Maritime Reporter and Engineering News page: 16

    & Reducing CO2 to Boot ill Moon was one of my Will provided me with more informa- Foiling ferries have been around for most suitable materials were aluminum very early engineering tion and this is one of those cases where decades (I actually interviewed for the for the hulls and steel for the foils

  • MR Nov-19#9 Blue Seal Inc          sales@bluesealinc.com   360.568.)
    November 2019 - Maritime Reporter and Engineering News page: 9

    Blue Seal Inc sales@bluesealinc.com 360.568.2098 bluesealinc.com www.marinelink.com 9 MR #11 (1-9).indd 9 10/25/2019 2:15:30 PM

  • MR Nov-19#4 MARITIME
Authors & Contributors
REPORTER
AND
ENGINEERING)
    November 2019 - Maritime Reporter and Engineering News page: 4

    MARITIME Authors & Contributors REPORTER AND ENGINEERING NEWS M A R I N E L I N K . C O M ISSN-0025-3448 USPS-016-750 No. 11 Vol. 81 Ewing DiRenzo Bryant Bondareff Goldberg Maritime Reporter/Engineering News (ISSN # 0025-3448) is published monthly (twelve issues) by Maritime Activity Reports, Inc.

  • MN Nov-19#112 Index page MN Nov19:MN INDEX PAGE  10/28/2019  6:17 PM)
    November 2019 - Marine News page: 112

    Index page MN Nov19:MN INDEX PAGE 10/28/2019 6:17 PM Page 1 ADVERTISER INDEX Page Page # Advertiser Website Phone# # Advertiser Website Phone# 55ABS Americas. . . . . . . . . . . . . . . . . . www.eagle.org (281) 877-6774 11KVH. . . . . . . . . . . . . . . . . .

  • MN Nov-19#110  PRODUCTS
HONEYCOMB PANELS
ALUMINUM DOORS
Aluminum Honeycomb
Joine)
    November 2019 - Marine News page: 110

    Marine Marketplace NEW PRODUCTS HONEYCOMB PANELS ALUMINUM DOORS Aluminum Honeycomb Joiner Doors Type I - Type IV doors Extruded Aluminum Joiner Doors Honeycomb Door Type A - Type P Stile doors Class C Approved Panels Water Closet Partitions Aluminum honeycomb panel with melamime facings Extruded Alum

  • MN Nov-19#94  construction 
and launched an aluminum research and survey vessel)
    November 2019 - Marine News page: 94

    Steering & control: SCHOTTEL Max Thrust Load: 1,400 tons AAM Launches Duke University RV All American Marine (AAM) completed construction and launched an aluminum research and survey vessel for Duke University. The Duke University Marine Lab (DUML) is a hydrofoil-assisted catamaran and is an ex- emplary arrangement

  • MN Nov-19#92 VESSELS
SAFE Boats Delivers 19th Boat to FDNY
SAFE Boats)
    November 2019 - Marine News page: 92

    VESSELS SAFE Boats Delivers 19th Boat to FDNY SAFE Boats International (SAFE) has delivered boats 17, 18 and 19 to the marine division of the New York Fire Department, all during the month of August. The three latest additions to the FDNY ? eet are 33’ full cabin boats, the most popular con? guration

  • MN Nov-19#85 CAD/CAM SOFTWARE
TrueProp Software, they used man-
ual)
    November 2019 - Marine News page: 85

    CAD/CAM SOFTWARE TrueProp Software, they used man- ual methods to assess and repair their propellers. “We cleaned the prop a bit, assessed whether it was repairable with manual gauges, and beat the propeller with rawhide or brass hammers to get it to lay on a pitch block,” says Dorothy. “Then we beat

  • MN Nov-19#84 CAD/CAM SOFTWARE
Software 
Tools for 
Propeller 
Professiona)
    November 2019 - Marine News page: 84

    CAD/CAM SOFTWARE Software Tools for Propeller Professionals TrueProp is software for propeller inspection devices, assisting propeller manufacturers and repair shops to identify damage, repair and tune propellers to improve performance and save fuel. By Adam Kaplan aving the right tools for the

  • MN Nov-19#75  to step back  for the new aluminum vessels (i.e. 
tinual)
    November 2019 - Marine News page: 75

    for new boat construction and covered,” said Marcia Blount. “But While any shipyard requires con- repair, caused the Blounts to step back for the new aluminum vessels (i.e. tinual investment, Blount Boats has and evaluate how to best utilize their offshore wind farm vessels) we really been particularly

  • MN Nov-19#34  is taken from a solid aluminum block, designed to 
maximize)
    November 2019 - Marine News page: 34

    Chief Technical Of cer water. This requires no action by the operator. Agile 4Marine’s U.S.-made ruggedized hardware pack- age is taken from a solid aluminum block, designed to maximize the surface area for superior cooling, while the interior of the case is cut to the exact shape of the boards inside

  • MN Nov-19#4 MarineNews
MarineNews  November 2019  Volume 30   Number)
    November 2019 - Marine News page: 4

    MarineNews MarineNews November 2019 Volume 30 Number 11 (ISSN#1087-3864) (USPS#013-952) Florida: 215 NW 3rd St., Boynton Beach, FL 33435 tel: (561) 732-4368; fax: (561) 732-6984 Departments Analysis New York: 118 E. 25th St., New York, NY 10010 & tel: (212) 477-6700; fax: (212) 254-6271 www.marinelink.

  • MP Q3-19#48 Advertiser Index
Page  Company     Website  Phone#
9)
    Sep/Oct 2019 - Maritime Logistics Professional page: 48

    Advertiser Index Page Company Website Phone# 9 Connecticut Port Authority www.CTPortAuthority.com (860) 577-5174 21 CPE Certifed Port Executive www.certifedportexecutive.com (902) 425-3980 1 Kalmar www.kalmarglobal.com Please visit us online C2 Nor thwest Seaport Alliance www.