Chase Boat Morrelli

  • Two extreme AC72 foiling catamarans with wing sails went head-to-head at over 40 knots in San Francisco Bay, California. The teams were competing in the 2013 Americas Cup Challenge which took place from September 7-21, 2013.
    Anyone watching the first few days of Americas Cup sailing will know that it looked like Emirates Team New Zealand had a seemingly untouchable lead – then out of the blue Oracle Team USA completed one of the greatest comebacks in sport to win the 34th America’s Cup. For anyone who has watched the rising speeds of sailing records plus the development of hydrofoil technology, this event was also bound to be a game changer for ‘power versus sail.’ Another race was on in San Francisco Bay as Chase Boats and Umpire Boats utilized gasoline and diesel engine horsepower versus the AC72 boats utilizing wind energy, aerodynamics and hydrodynamics.
    The AC72 is a state-of-the-art design wind powered craft. Overall length is 86 ft. (26 m), waterline length is 72 ft. (22 m) and it has an extraordinary beam of 46 ft. (14 m). The boat only weighs 13,000 pounds (5900 kg), it has a maximum draught of 14 feet (4.4 m) and is handled by a crew of eleven.
    The AC72 rises out of the water on foils and designers always expected it to sail faster than the wind. Predictions were upwind at 1.2 times the speed of the true wind and downwind at 1.6 times the speed of the true wind. But the AC72 has proved to be faster, averaging about 1.8 times the speed of the wind, with peaks slightly over 2.0 times the speed of the wind. The extreme foiling catamaran design means that AC72 racing takes place on the edge of control.
    There is potential for crews to fall overboard or to require immediate attention in case of injury. Each team is allowed a Chase Boat and to provide a margin of safety these high speed craft need to not only match the race boat speeds, but to be able to exceed them.
    With the wing mast / sail set up if a crew breaks something, they can’t just turn and go home, because the wing stays loaded up.
    The support boat has to be able to tow an AC72 home faster than the wind speed, which can mean towing at 25 knots. The boat also needs the puling power to be able to right an AC72 after a capsize – fast.
    The crews try to avoid the dangers of a capsize but it is a possibility that support teams must plan for.
    Tragically in May 2013, British Olympic sailing champion Andrew ‘Bart’ Simpson died after the Swedish America’s Cup craft he was sailing capsized and broke apart in San Francisco Bay. Simpson, a 36-year-old two-time Olympic medallist, suffered multiple blows to his head and body in the accident involving the 72-ft. Artemis Racing catamaran. The San Francisco medical examiner’s report said, ‘In the moments before it capsized, the yacht was turning downwind in a so called bear-away manoeuvre while travelling at about 30 knots, with wind of about 20 knots. The front of the vessel then dipped beneath the surface, the port hull broke and inverted on top of the wing.’

    Most conventional power craft cannot fulfill the demanding task of supporting the 72-ft. Americas Cup catamarans that can accelerate to 40 knots in seconds. The power boat ride quality has to allow for keeping up with an AC72 for an entire day, regardless of how fast the sail boat is going or what the sea conditions are like. The objective is to have a high speed craft that does not fatigue the crew and keeps the team’s paramedic and dive crews ready for action.
    This is high stakes racing with multi-million dollar investments by owners and sponsors. With money of less object than usual it is interesting to compare the various designs that the teams selected as Chase Boats. The racers also require a high performance Umpire Boat capable of following close to the action and providing instant visuals of the competition as it unfolds.

    The Offshore Interceptor - America’s Cup Umpire Boat
    A Willard Marine High Speed Interceptor was chosen by the Americas Cup Racing Association as the Umpire Boat for the 2013 Americas Cup. The 43-ft. (13 m) craft is powered by twin Cummins 600 hp inboard diesel engines and surface drive system. The Interceptor was developed for military use from a Scarab offshore racing design and can achieve speeds greater than 60 knots.
    Willard Marine teamed up with Larry Smith of Team Scarab to develop the design. Team Scarab has a 30-year heritage of designing and building world champion offshore race boats. The Interceptor was initially prototyped in response to a request by the U.S. Navy for a high-speed combat mission boat. The 43 Assault is also ideal for intercepting and boarding boats and vessels in the open ocean. Willard worked closely with Team Scarab to refine their Deep V stepped hull design in order to meet the U.S. Navy requirements, including shock mitigation seats and light weight engines. The Interceptor also has a Supplemental Stability System (S3) that increases the stability, passenger comfort and safety of heavily loaded high speed craft. The variable geometry of the sponsons increases hull efficiency and aft buoyancy where the fuel, engine and passenger loads are.

    The Rigid Hull Inflatable Boat - Oracle Racing Team USA Chase Boat
    Naiad Inflatables of Newport produced two custom built 42-ft. (12.9 m) RHIBs for Oracle Racing Team USA to support the Defender AC72 Yachts. Twin Yanmar 370hp inboard engines allow the chase boat to maintain the power, agility and endurance required to support the yachts through the variable conditions of San Francisco Bay at up to 45 knots.
    Naiad has a strong legacy of involvement in the Americas Cup, dating back to tenders produced for Challenge New Zealand for the 1992 event in San Diego. Naiad was the first company to develop a RHIB more than 40 feet specifically designed to carry the large fully battened mainsails, unique at the time to the IACC class of Americas Cup race yachts.
    These vessels were used by Team New Zealand, which successfully challenged for and won the Americas Cup in 1995 and successfully defended the Americas Cup in 2000. In addition to Team New Zealand, two of the challengers had Naiad boats custom built for the 2000 Americas Cup. The 46-ft. (14 m) Naiad Ranger was the first shaft driven inflatable, she was custom built to tow two of Young Americas IACC yachts simultaneously. This platform spawned a whole new class of diesel shaft commercial RHIB vessels for towing and pilot boat use.

    High Speed Catamaran - Emirates Team New Zealand Chase Boat

    Morrelli & Melvin designed a 45-foot (13.7 m) 1,200 hp high-speed catamaran as Tender and Chase Boat for Emirates Team New Zealand AC72. The concept was developed in collaboration with ETNZ and Salthouse Boatbuilders. The ETNZ chase boat is powered by four 300hp Yamaha V6 four-stroke outboard engines and has a top speed of 58 knots.
    The fiberglass hull is topped with inflatable tubes allowing it to slip in beside the AC72. The ETNZ boat includes a protected main deck cabin, head, and large storage area under the foredeck. The craft has four engines to deliver the power needed to right a capsized AC72. Running all four engines at 3,000 rpm gives 30 knots and the boat uses 100 liters of fuel an hour. The boat holds 1,700 liters of fuel which gives a range of 510 nautical miles or 17 hours running time at 30 knots.

    Sitting On The Dock Of The Bay

    Chris Sitzenstock gave an overview of conditions onboard the Oracle Team USA Chase Boat, “the sea state in the Bay was really everything you can imagine. A few miles outside the Golden Gate to the South Bay it can go from square six to eight-ft. waves to a mill pond. The Bay is very consistent for wind, waves and ground swell funneling through the Golden Gate Bridge. Wash from the spectator boats did not have a great effect on the race course as the Bay is so busy with commercial traffic and ferries. The particularly bad sections were usually combinations of wind against tide.”
    We asked Chris whether protecting equipment (mechanics / electrical / cameras) was a reason to slow down. He replied, “the Chase Boats have to follow the racing yachts so if the equipment could not take it we had to improve equipment. We asked Chris whether protecting the human body was a reason to slow down. He replied, “the Chase Boats have to follow the racing yachts so if the human body could not take it we had to improve the human body.”
    There is plenty that the military and professional fast boat sector can learn from this unique situation where craft are pushed to the limit for days and weeks. Congratulations to all the racers and support teams that made the 2013 Americas Cup an outstanding event and raised the bar for power versus sail.


    The Author
    John Haynes, AFNI, is a Yachtmaster Ocean and Advanced Powerboat Instructor. Subject matter expertise includes high speed craft consultancy, product development and specialist training. He is Operations Director of Shock Mitigation and founder of the RIB & High Speed Craft Directory that brings together specialist boats and equipment for the professional sector
    www.ribandhsc.com

     

    (As published in the March 2014 edition of Maritime Reporter & Engineering News - www.marinelink.com)

     

  • MR Feb-24#22 R&D
MATT HART 
Matt Hart, Manager & Platform Leader)
    February 2024 - Maritime Reporter and Engineering News page: 22

    R&D MATT HART Matt Hart, Manager & Platform Leader, Marine & Stationary Power Systems, Wabtec, offers insights on how the megatrends of decarbonization, energy transition and autonomy all inspire Image courtesy Wabtec and impact the marine power solutions from Wabtec. By Greg Trauthwein Matt, to start

  • MR Feb-24#6 Editorial
MARITIME
REPORTER
AND
ENGINEERING NEWS
M A R I N)
    February 2024 - Maritime Reporter and Engineering News page: 6

    Editorial MARITIME REPORTER AND ENGINEERING NEWS M A R I N E L I N K . C O M s the world increasingly HQ 118 E. 25th St., 2nd Floor becomes a geopolitical New York, NY 10010 USA T +1.212.477.6700 quagmire, with Russia’s Awar in the Ukraine soon CEO John C. O’Malley entering year three and disparate

  • MN Feb-24#43 Products
  In-Mar Solutions VETUS Maxwell
1 2  
3
  
Volvo)
    February 2024 - Marine News page: 43

    Products In-Mar Solutions VETUS Maxwell 1 2 3 Volvo Penta 4 Cambridge Pixel fessional Platform, enables a vessel to Seakeeper 1. In-Mar Solutions: 5 have up to eight power sources, and Alu Pilot Chairs & Deck Rails In-Mar Solutions offers a complete includes matched software, services

  • MN Feb-24#41 Vessels
WINDEA Intrepid & 
WINDEA Courageous
The ?  rst)
    February 2024 - Marine News page: 41

    Vessels WINDEA Intrepid & WINDEA Courageous The ? rst two designed, BV-classed CTVs for WINDEA CTV. The third newbuild crew and fourth vessels are under construction at St Johns, and transfer vessels construction of the ? fth vessel is well underway at Breaux (CTV) for WIN- Brothers in Louisiana.

  • MN Feb-24#38 Vessels
Crowley’s All-electric 
Harbor Tug eWolf Delivered
B)
    February 2024 - Marine News page: 38

    Vessels Crowley’s All-electric Harbor Tug eWolf Delivered By Eric Haun Crowley has taken delivery of its groundbreaking vessel ers and shipyards,” said Garrett Rice, president of Mas- eWolf, the ? rst all-electric, ship assist harbor tugboat in ter Boat Builders. “We are proud to have partnered with the

  • MN Feb-24#37 Feature
Marine Simulation
On the lifeboat side, both)
    February 2024 - Marine News page: 37

    Feature Marine Simulation On the lifeboat side, both initial and re- • On February 9, 2023, the IMO sub-committee on Human Element, fresher training can be conducted using simu- Training and Watchkeeping (HTW) rati? ed revisions to the model course lators only. On the rescue boat side, simula- 1.23 on

  • MN Feb-24#35 Feature
Marine Simulation
“We enable workers to develop)
    February 2024 - Marine News page: 35

    Feature Marine Simulation “We enable workers to develop critical worksite-speci? c competencies by engaging them in challenging simulation training programs,” said Clayton Burry, vice president of sales at Virtual Marine. “We’ve been involved heavily in the research associated with simulation as well

  • MN Feb-24#34 Feature
Marine Simulation
All images courtesy Virtual)
    February 2024 - Marine News page: 34

    Feature Marine Simulation All images courtesy Virtual Marine S T R DIMULATOR RAINING IS THE EAL EAL By Eric Haun A legacy of innovation n the commercial maritime and offshore industries, where worker safety and competency are crucial, ef- Virtual Marine’s journey began two decades ago with a sin- fect

  • MN Feb-24#25 Feature
Passenger Vessel Safety
Interestingly, in the)
    February 2024 - Marine News page: 25

    Feature Passenger Vessel Safety Interestingly, in the Flagship docu- certain passenger vessels. growing commuter traf? c. “In addi- ment, PVA acknowledges and thanks • Crew shortages have caused tion,” he added, “several small U.S. the USCG for its help in developing a operators to change schedules.

  • MN Feb-24#23 Passenger Vessel Safety
occur on a sightseeing vessel or)
    February 2024 - Marine News page: 23

    Passenger Vessel Safety occur on a sightseeing vessel or an Ohio River dinner cruise? This contrast between speci? c – sometimes very speci? c – and general comes to mind when considering the numerous safety advisories pertaining to recent amphibious DUKW boat tragedies or the 2019 Conception dive boat

  • MN Feb-24#8  80 GW, of which close to 
chase agreements and allowing)
    February 2024 - Marine News page: 8

    previously awarded, the total potential rapidly, accepting the termination of power sales & pur- leased will amount to around 80 GW, of which close to chase agreements and allowing the canceled projects to be 26 GW is at some stage in the federal permitting process. rebid into new solicitations. The Commonwealt

  • MT Jan-24#33 four of its 18 Ohio-class SSBNs and  They can also operate)
    January 2024 - Marine Technology Reporter page: 33

    four of its 18 Ohio-class SSBNs and They can also operate without the wires, These weapons are launched over the side converted them to conventional cruise using their own active or passive sensors. of surface ships with the ubiquitous MK missile carriers. The ? rst four Ohio- They are programmed to

  • MT Jan-24#32 SUBSEA VEHICLES DEFENSE
USS Baltimore (SSN 704) served for)
    January 2024 - Marine Technology Reporter page: 32

    SUBSEA VEHICLES DEFENSE USS Baltimore (SSN 704) served for just 15 and a half years in 2004, and the newest, USS Hyman G. Rickover (SSN 795) of active service. joining the ? eet in October of 2023. Newer versions will be Los Angeles-class submarines carried MK-48 heavyweight ? tted with the Virginia

  • MR Jan-24#21 COATINGS 
Figure 6. The M/V Mark W. 
Barker sports exterior)
    January 2024 - Maritime Reporter and Engineering News page: 21

    COATINGS Figure 6. The M/V Mark W. Barker sports exterior topcoats in The Interlake Steamship Company’s distinctive red (hull) and brown (freeboard). coat with a DFT of 20 to 25 mils. Aluminum oxide was added for at least a decade before dry docking – nearly double the for slip resistance and texture

  • MR Jan-24#20 TECH FEATURE
Figure 4. The vessel’s cargo holds feature)
    January 2024 - Maritime Reporter and Engineering News page: 20

    TECH FEATURE Figure 4. The vessel’s cargo holds feature Figure 5. The walls of the cargo holds All images courtesy of The Interlake Steamship Company ? at bottoms that accommodate the use bene? t from a zinc-based coating that of heavy machinery, which necessitated provides durability in an area

  • MR Jan-24#19 COATINGS 
Figure 1. The M/V Mark W. Barker is speci?)
    January 2024 - Maritime Reporter and Engineering News page: 19

    COATINGS Figure 1. The M/V Mark W. Barker is speci? cally designed to navigate the occasionally narrow rivers and con? ned ports scattered across the Great Lakes region. All images courtesy of The Interlake Steamship Company Figure 2. Distinguished by its Figure 3. The Interlake Steamship square-shaped

  • MR Jan-24#18 TECH FEATURE
A New Era for Great 
Lakes Freighters with)
    January 2024 - Maritime Reporter and Engineering News page: 18

    TECH FEATURE A New Era for Great Lakes Freighters with Modern Marine Epoxies By Justin Peare, Marine Coatings Representative, Great Lakes Region & Matt Heffernan, Commercial Marine Business Manager, North America, Sherwin-Williams Protective & Marine he Motor Vessel Mark W. Barker – the ? rst U.S.

  • MR Jan-24#12 The Path to Zero
© Jifmar Group Library
Americas Cup)
    January 2024 - Maritime Reporter and Engineering News page: 12

    The Path to Zero © Jifmar Group Library Americas Cup Innovation & a Carbon-Free Shipping Future By Giorgio PROVINCIALI, CTO of AYRO and Former America’s Cup Performance Predictions Leader he Golden Gate Yacht Club sign, all of which were changed by the success in bringing the Americas Cup (GGYC)

  • MR Jan-24#Cover January 2024
MARITIME
REPORTER
AND
ENGINEERING NEWS
marineli)
    January 2024 - Maritime Reporter and Engineering News page: Cover

    January 2024 MARITIME REPORTER AND ENGINEERING NEWS marinelink.com Roy Campe, CTO, CMB.TECH Hydrogen Cdhi i h Campe and his team pioneer the use of dual-fuel hydrogen on ships & boats and in ports CRUISE & FERRY Since 1939 | Number 1 | Volume 86 Inside Wasaline’s Aurora Botnia WASTE WATER Cruise Lines

  • MT Nov-23#43 Jonas Wüst, now CEO 
at Tethys Robotics, 
set out to build)
    November 2023 - Marine Technology Reporter page: 43

    Jonas Wüst, now CEO at Tethys Robotics, set out to build an autonomous underwater drone following a student research project at Eidgenössische Technische Hochschule Zürich (ETH Zurich), a public university in Switzerland. Professional divers and the Tethys ROV Underwater drone from Tethys

  • MT Nov-23#5 The Next-generationINS/GNSS 
Post-processing Software
Qualit)
    November 2023 - Marine Technology Reporter page: 5

    The Next-generationINS/GNSS Post-processing Software Quality: Green -> centimetric position; Blue -> decimetric < 30cms; Red -> Raw GNSS data SURVEYING UNDER BRIDGES Å GNSS Altitude (m) - Merged Å Altitude (m) - Merged MADE EASY This survey has been done with an APOGEE INS under very challenging condition

  • MR Dec-23#36 G    REAT
of
HIPS
S
2023
Eastern Shipbuilding
OPC: A “G -C)
    December 2023 - Maritime Reporter and Engineering News page: 36

    G REAT of HIPS S 2023 Eastern Shipbuilding OPC: A “G -C ”AME HANGER he much-needed replacement for the Coast The OPC is based on the Vard Marine Inc., VARD 7 110 Guard’s long-serving medium endurance cut- Offshore Patrol Vessel design. Vard has been working with ters (WMECs) took a giant step closer

  • MR Dec-23#14 Maritime Safety – Safety Management Systems
Photo by Greg)
    December 2023 - Maritime Reporter and Engineering News page: 14

    Maritime Safety – Safety Management Systems Photo by Greg Trauthwein Passenger Vessel Safety How to design, implement, and improve your SMS t’s been four years since the fatal Conception dive boat must include clearly de? ned safety and environmental protec- ? re claimed 34 lives off the California coast

  • MN Nov-23#64 ADVERTISER INDEX
Page Company    Website Phone#
39 Ahead)
    November 2023 - Marine News page: 64

    ADVERTISER INDEX Page Company Website Phone# 39 Ahead Sanitation www.aheadsanitationsystems.com (337) 330-4407 29 All American Marine www.AllAmericanMarine.com (360) 647-7602 49 Arcosa Marine www.arcosamarine.com (615) 400-4373 3 C Job Naval Architects c-job.com/offshore Please visit our