Palmer Power

  • Based on impressive fuel consumption and performance results from the Volvo Penta engines installed in a new-construction pushboat, the operator decided to repower one of its older vessels with the same D16 engine package.

    When Volvo Penta supplied the main propulsion system for the M/V Ted Kayser, a new 60-foot pushboat christened at the end of 2012, it was Allemand Industries, Inc., the Volvo Penta Regional Power Center in Harvey, LA, that oversaw the installation. Designed by Entech & Associates of Houma and constructed by Eymard Marine Construction and Repair of Harvey, M/V Ted Kayser today operates with two Volvo Penta D16 engines, each providing continuous 650 hp at 1800 RPM. The engines drive a pair of Rolls-Royce four-bladed stainless steel propellers through Twin Disc MGX5222 5.04:1 marine gears.
    Since the vessel was commissioned, it has put more than 6,000 hours of service on the engines. Documented average fuel consumption runs between 4.01-4.38 gallons per hour per engine. According to Volvo Penta, and compared to other vessels performing the same work, the pushboat consumes about 180-200 fewer gallons daily, resulting in fuel savings of about $1,000 per day. The annual savings are easy to calculate.
     
    Volvo Penta Penetrates the Workboat Sector
    Ron Huibers, president of Volvo Penta of the Americas, told MarineNews in February, “We see tremendous growth opportunities for Volvo Penta in the commercial marine sector. Our D16 engines, in particular, are designed specifically to meet the needs of heavy-duty displacement commercial vessels. In large measure, our success in the Gulf Coast workboat market is attributable to the great team at Allemand Industries, who provided outstanding technical support in specifying, installing, testing and fine-tuning the engines and controls.”
    For its part, Allemand Industries has been dedicated to the marine and industrial engine service-and-repair business for the last 30 years. Established in 1981 by the Allemand family, the firm maintains deep and long lasting business relationship with their customers. As a Power Center for Volvo Penta marine commercial engines, Allemand supports the states of Alabama, Arkansas, Louisiana, Mississippi, as well as the Gulf Coast and Red River Valley areas of Texas.
    David LeBlanc, product manager at Allemand, said, “The D16 engines are ideally suited for pushboats because their low-end torque enables the vessel to start pushing when the RPM reaches 1,100. The result is good momentum from the start at a lower RPM and better fuel economy. The D16 is the only marine engine in its class with this unique torque curve.”
    The D16 is an inline six-cylinder with Volvo Penta’s Electronic Vessel Control (EVC) technology. The engine features a robust block with ladder frame, high-pressure unit injector system, four valves per cylinder, twin-entry turbo and charge air cooler. The heat exchanger is designed for reduced charge-air cooling temperature, which in combination with the injection system and Engine Management System further improves performance and drivability. According to Volvo Penta, this results in a very smooth running engine with world-class performance, low fuel consumption and reduced emissions.

    Repeat Business, Proven Performance
    As a result of the positive experience with Volvo Penta engine packages supplied by Allemand Industries, the same operator decided to retrofit a second vessel, M/V Shelley (pictured on previous page), with the same D16 engine packages. Beyond this, Allemand reports that the customer is looking at other vessels in the fleet to repower, as well.
    Originally built in 1980, M/V Shelley is a 60 foot LOA, 26 foot beam workboat that draws 9.5 feet in draft. Allemand Industries removed the two existing Diesels, and installed two Volvo Penta D16C-CMH engines, with Twin Disc MGX5222 marine transmissions, ratio 5.04:1, packaged at the Allemand shop.
    Allemand’s LeBlanc told MarineNews, “The customer decision to repower the second vessel with Volvo Penta was based on the experience with the D16 performance on the first vessel, in terms of better low-end torque, quicker throttle response, reliability/service and lower cost of operation.” He added, “The Volvo Penta D16 engine has definitely proven itself on the river. Every fleet operator is watching the vessels. We have had several operators contact us wanting to learn more about the product.”

    Looking Ahead
    Volvo Penta Americas President Huibers says that Volvo Penta is making inroads in the U.S. workboat market. He pointed, as another example, to Zimco Marine, a commercial fishing fleet based in Brownsville, Texas. Zimco turned to Volvo Penta to repower two of its shrimp boats with D13 MH engines. Since July, the repowered vessels have put in more than 1,000 hours and have already recorded both financial and performance benefits.
    The company calculates its fuel consumption reduction at more than 30 percent over its original engine package – a savings of nearly $40,000 per year, per engine.
    The shrimp boat captains say they can feel a difference at the helm, noting that the D13 works harder and more efficiently at lower engine speeds. The Volvo engine was also found to have better acceleration and more torque at lower RPM — in addition to being quieter, lighter and smaller. With all of these advantages in mind, the company has already placed an order through the local Volvo Penta dealer, Palmer Power in Houston, for replacement engines for another two boats.
    It hasn’t been that long since Volvo Penta actively began to target the domestic workboat markets with their proven engine designs. Long successful overseas in similar commercial markets and best known here in the high end recreational markets, it also likely won’t be long until the Volvo Penta brand makes its mark on the U.S. Gulf Coast, and beyond. When it does, the D16 inline six-cylinder with Volvo Penta’s Electronic Vessel Control (EVC) technology will no doubt be a big part of that equation.



    (As published in the March 2014 edition of Marine News - www.marinelink.com)
     

  • MR Feb-24#47 MARKETPLACE
Products & Services)
    February 2024 - Maritime Reporter and Engineering News page: 47

    MARKETPLACE Products & Services www.MaritimeEquipment.com Powering the fleet for 60 years! Manufactured by MER Equipment (206) 286-1817 www.merequipment.com Join the industry’s #1 Linkedin group http://bit.do/MaritimeNetwork Vessels, Barges & Real Estate

  • MR Feb-24#44 Tech Files
Latest Products & Technologies
MarineShaft)
    February 2024 - Maritime Reporter and Engineering News page: 44

    Tech Files Latest Products & Technologies MarineShaft Yanmar Hydrogen MarineShaft specializes in urgent re- Fuel Cell AIP pair/replacement of damaged rudder and Yanmar Power Technology Co., Ltd. propeller equipment along with many (Yanmar PT), a subsidiary of Yanmar on-site repair services. MarineShaft

  • MR Feb-24#40 Images Seaspan Corporation/Foreship
With plans to have a)
    February 2024 - Maritime Reporter and Engineering News page: 40

    Images Seaspan Corporation/Foreship With plans to have a full-scale test engine running on am- age it'll be similar to LNG.” Looking at the engine makers and monia in early 2024, the company said it expects to hold its de- their progress, Brindley is diplomatic in saying that there is no livery timeline

  • MR Feb-24#38 TECH FEATURE
Ammonia and the 15,00
A project initiated by)
    February 2024 - Maritime Reporter and Engineering News page: 38

    TECH FEATURE Ammonia and the 15,00 A project initiated by Seaspan Corporation and the Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping (MMMCZCS) has set out to develop a design for a large 15,000-TEU ammonia-fueled container vessel. Image Seaspan Corporation/Foreship By Greg Trauthwein orking with

  • MR Feb-24#36 HYBRID 
2-stroke controllable pitch 
propeller PTO powertrai)
    February 2024 - Maritime Reporter and Engineering News page: 36

    HYBRID 2-stroke controllable pitch propeller PTO powertrain Source: MAN Energy Solutions how the system is intended to operate, says Oskar Levander, VP Strategy & Business Development, Kongsberg Maritime. For example, a primary shaft-driven PTO rotates whenever the engine is running; a secondary one

  • MR Feb-24#35 PTI/PTO
30 years ago shaft generators with PTI capability)
    February 2024 - Maritime Reporter and Engineering News page: 35

    PTI/PTO 30 years ago shaft generators with PTI capability kept container ships sailing at top speed. That purpose gone, PTI/PTO is making a new comeback in more cargo shipping segments, this time for reducing emissions. By Wendy Laursen etro? tting a shaft generator is not an insigni? - the ef? ciency

  • MR Feb-24#25 MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY)
    February 2024 - Maritime Reporter and Engineering News page: 25

    MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY POWER SYSTEMS, WABTEC fuel blends up to 100% are in operation maintenance intervals to make sure that What’s the biggest challenge today, running on both biodiesel and re- our engines don’t have to be touched in your job? newable diesel blends.

  • MR Feb-24#24 R&D
marinized version of the V228 product from 8 to 16)
    February 2024 - Maritime Reporter and Engineering News page: 24

    R&D marinized version of the V228 product from 8 to 16 cylinders. through improved lifecycle cost, trade-offs, it also allows us That engine is called the V228 for the bore size in millimeters. to do concurrent design and reliability demonstrations. We’re With the advent of emissions regulations for EPA

  • MR Feb-24#23 MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY)
    February 2024 - Maritime Reporter and Engineering News page: 23

    MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY POWER SYSTEMS, WABTEC “Wabtec achieved Tier 4 NOx and PM without the use of aftertreatment, which sets our product apart from the competition in unlocking logistical ? exibility and life-cycle cost savings for the owner.” Photo Wabtec Matthew

  • MR Feb-24#22 R&D
MATT HART 
Matt Hart, Manager & Platform Leader)
    February 2024 - Maritime Reporter and Engineering News page: 22

    R&D MATT HART Matt Hart, Manager & Platform Leader, Marine & Stationary Power Systems, Wabtec, offers insights on how the megatrends of decarbonization, energy transition and autonomy all inspire Image courtesy Wabtec and impact the marine power solutions from Wabtec. By Greg Trauthwein Matt, to start

  • MR Feb-24#20 MARKETS
FPSO technology dominates the region’s FPS demand.)
    February 2024 - Maritime Reporter and Engineering News page: 20

    MARKETS FPSO technology dominates the region’s FPS demand. duction and storage of low and zero emission energy carriers, In all, 18 countries in West and East Africa are expected such as methanol and ammonia. One exciting development to receive new FPSOs, FLNGs and FPUs between 2024 and leverages

  • MR Feb-24#17 METHANOL STORAGE
provals from other classi?  cation)
    February 2024 - Maritime Reporter and Engineering News page: 17

    METHANOL STORAGE provals from other classi? cation societies are ongoing, said Lilp, – including accommodation.” although he acknowledges that journey from AiP to full class ap- As of September 2023, methanol had been speci? ed for 216 proval is substantive. In an area where the regulations underlying

  • MR Feb-24#15 Cruise ships can be cleaned during normal passenger)
    February 2024 - Maritime Reporter and Engineering News page: 15

    Cruise ships can be cleaned during normal passenger transfer port calls. Cleanings and cargo operations can occur simul- taneously. How is this possible? The EverClean robots are small and require only a single cargo van on the pier. Multiple robots can be deployed simultaneously. Precision navigation

  • MR Feb-24#6 Editorial
MARITIME
REPORTER
AND
ENGINEERING NEWS
M A R I N)
    February 2024 - Maritime Reporter and Engineering News page: 6

    Editorial MARITIME REPORTER AND ENGINEERING NEWS M A R I N E L I N K . C O M s the world increasingly HQ 118 E. 25th St., 2nd Floor becomes a geopolitical New York, NY 10010 USA T +1.212.477.6700 quagmire, with Russia’s Awar in the Ukraine soon CEO John C. O’Malley entering year three and disparate

  • MR Feb-24#2 NO.2 / VOL. 86 / FEBRUARY 2024
26
Photo on this page and)
    February 2024 - Maritime Reporter and Engineering News page: 2

    NO.2 / VOL. 86 / FEBRUARY 2024 26 Photo on this page and on the Cover: Courtesy ARC 22 Marine Power: The Future is Now Departments Matt Hart, Wabtec Corporation, offers insights on how the megatrends of decar- bonization, energy transition and autonomy drive engine innovations. 4 Authors & Contributors By

  • MR Feb-24#Cover February 2024
MARITIME
REPORTER
AND
ENGINEERING NEWS
marinel)
    February 2024 - Maritime Reporter and Engineering News page: Cover

    February 2024 MARITIME REPORTER AND ENGINEERING NEWS marinelink.com ARC KEEPING THE CARGO ROLLING Repair & Maintenance Since 1939 | Number 2 | Volume 86 Stern Tube Damage Declining? Marine Power R&D Mat Hart, Wabtec Shaf Generators Demand on the Rise Floating Production Growth & Transition COV1 MR Feb

  • MN Feb-24#43 Products
  In-Mar Solutions VETUS Maxwell
1 2  
3
  
Volvo)
    February 2024 - Marine News page: 43

    Products In-Mar Solutions VETUS Maxwell 1 2 3 Volvo Penta 4 Cambridge Pixel fessional Platform, enables a vessel to Seakeeper 1. In-Mar Solutions: 5 have up to eight power sources, and Alu Pilot Chairs & Deck Rails In-Mar Solutions offers a complete includes matched software, services

  • MN Feb-24#41 Vessels
WINDEA Intrepid & 
WINDEA Courageous
The ?  rst)
    February 2024 - Marine News page: 41

    Vessels WINDEA Intrepid & WINDEA Courageous The ? rst two designed, BV-classed CTVs for WINDEA CTV. The third newbuild crew and fourth vessels are under construction at St Johns, and transfer vessels construction of the ? fth vessel is well underway at Breaux (CTV) for WIN- Brothers in Louisiana.

  • MN Feb-24#40 Vessels
HOS Warhorse & HOS Wild Horse 
shipyard construction)
    February 2024 - Marine News page: 40

    Vessels HOS Warhorse & HOS Wild Horse shipyard construction contracts were wrongfully termi- nated. Gulf Island and Hornbeck settled in October 2023, clearing way for the builds to be completed by another yard. Eastern secured the contract to complete the builds from Zurich American Insurance Company

  • MN Feb-24#39 Vessels
Next WSF Vessels Could Be Built 
Outside of)
    February 2024 - Marine News page: 39

    Vessels Next WSF Vessels Could Be Built Outside of Washington State By Eric Haun The next newbuilds for Washington State Ferries (WSF) is required to award a credit of 13% of the bid price for bid could be built by a shipyard outside of Washington as the proposals for vessels constructed in the state of

  • MN Feb-24#35 Feature
Marine Simulation
“We enable workers to develop)
    February 2024 - Marine News page: 35

    Feature Marine Simulation “We enable workers to develop critical worksite-speci? c competencies by engaging them in challenging simulation training programs,” said Clayton Burry, vice president of sales at Virtual Marine. “We’ve been involved heavily in the research associated with simulation as well

  • MN Feb-24#29 Feature
Offshore Wind
Ørsted
now has some signi? cant)
    February 2024 - Marine News page: 29

    Feature Offshore Wind Ørsted now has some signi? cant challenges. In? ation is de? nitely one of them,” said Jan Sloth Møller, offshore site manager at Ørsted. But he noted that the goals and ambitions held by federal and state governments could create an openness to reevaluate funding arrangements for

  • MN Feb-24#28 Feature
Offshore Wind
© Eric Dale Creative / Adobe Stock
US)
    February 2024 - Marine News page: 28

    Feature Offshore Wind © Eric Dale Creative / Adobe Stock US OFFSHORE WIND: D N OOWN BUT OT UT By Eric Haun – Bob Dylan “The winds of change are blowing wild and free.” n the U.S. offshore wind industry, developments over are many stakeholders still committed to ensuring offshore recent months have

  • MN Feb-24#17 Column
Going Green
ernize ferry operations, replace aging)
    February 2024 - Marine News page: 17

    Column Going Green ernize ferry operations, replace aging implemented to address grid and space increased power requirements. That vessels, and upgrade ferry terminals. constraints with electri? cation. can involve installing new conduit, The grants are critical to helping WETA is one of many U.S.