Laser System

  • North East England-based Modus Seabed Intervention Limited is a relatively small business but its goals are ambitious and focused. Elaine Maslin reports.

    After four years spent developing a hybrid AUV/ROV (HAUV) based on a modified Saab Sabertooth AUV system, Modus Seabed Intervention has now bought its second, deep water rated Sabertooth, which will be delivered this summer.

    The acquisition of its latest 3,000m-rated Sabertooth, will enable the company to continue to build on its track record and to offer vehicles with enhanced artificial intelligence and autonomy capabilities.

    The company’s vision is for its HAUVs to operate infield at offshore oil and gas and renewables sites, including wind farms, independent of service vessels. This could be via a surface deployment system or via a subsea garage/docking station, which the vehicle can ‘fly’ in and out of. From the docking facilities, the vehicle can operate as an AUV (without a tether), using onboard batteries, or, where direct control is required, it can operate like an ROV either via a fiber optic tether (which enables very long excursions), or by means of a full power and control umbilical.

    Instead of being deployed from a dedicated support vessel, the docking station is designed to be deployed to the seabed from a vessel crane. The aim is to use a vessel already engaged at a specific location, such as a supply vessel, DSV or offshore renewables service vessel.  The HAUV can then perform inspection and/or survey independently, in synergy with the vessel’s primary activity, reducing costs. The HAUV will return to its dock on completion of the work scope and will wait to be recovered at a convenient time. “For example, if you have engaged a vessel to perform a platform supply run, you can drop off the HAUV on the way out and then pick it up on the way back after it has completed its predetermined task,” says Nigel Ward, Modus’ chief commercial officer. Based on the battery capacity of Modus’ current HAUV, surveys covering about 60km can be run on a single autonomous charge, with survey time depending on speed and payload.

    Modus’ background is in subsea trenching services. When the company was looking to invest in new technology, it felt that the ROV market was mature, if not saturated, so Modus looked to diversify and acquired a Remus AUV with a view to providing lower cost survey and inspection services from vessels which were already out working. The intention was to piggy back off vessels and let the Remus go off and do its work while the vessel continued with its primary task (instead of an ROV being used, tying up an ROV support vessel The benefits were seen to be a reducing human error  making offshore projects easier, keeping skilled staff onshore and reducing costs and increasing safety.

    The Remus was not quite the right vehicle for the activities Modus were involved with. It came with a side scan sonar, but customers wanted bathymetry and, like many AUV systems, it was difficult to upgrade the vehicle or change out sensors for different applications,” says Ward.  “In any event, the existing AUVs in the market are not actually that autonomous, often the vessel needs to track the vehicle during a scope, which, in our eyes, defeated the object of the autonomous feature.”

    Images: Modus Seabed Intervention

    So, Modus looked at Saab Seaeye’s Sabertooth. “It’s a cross between an ROV and an AUV. We wanted the benefits of both. The ability to mount a flexible survey sensor payload quickly and easily is critical to meet customer requirements. We can hire a sensor, integrate it and away you go. 

    There’s so much new survey technology being developed at the moment, so we wanted to make sure we could use it so as to future proof the vehicle.

    “We also wanted to be able to hover like an ROV, have the speed of an AUV and be able to perform truly autonomous operations, so you don’t have to dedicate a vessel to chase the HAUV with an ultra-short baseline positioning system. We felt that the Saab Sabertooth meets this criteria.

    “The vehicle relies, in its base package, on its IXBlue Phins3 INS, and RDI workhorse DVL, with data acquisition, navigation and processing of sensor data managed by QINsy, which also takes in Novatel DGPS data. However, the payload is flexible and it could also work within long baseline (LBL) arrays or with a USBL system where required, with a Sonardyne AvTrak 6, providing a transducer, transceiver and telemetry link in one”, says Ward.

    In 2017, the company performed demonstrations and trials and the HAUV was ready for commercial operations in 2018.  In one of the trial projects in 2017, the HAUV was launched from a quayside at a lake close to Saab’s Facility in Sweden to perform a “mow the lawn” style pre-programmed survey collecting MBES, SSS and SBP data over about a 15km route, with no external aiding from a support vessel (just the vehicle’s DGPS, INS and DVL). “Having gone out and repeated the survey, it saw very little drift,” says Ward. The vehicle was also successfully trialed multiple times, autonomously docking into its subsea garage. In early 2018, this function was further developed, as part of an Innovate UK funded project for wind farm resident inspection performed. This trial was run at the ORE Catapult facility in Blyth and also involved indirect power coupling and data transfer using a Blue Logic inductive connector.  

    In the final phase of this funded demonstrator project, later this year, in between its commercial commitments, the company will trial a resident hybrid AUV concept at an offshore wind farm in the UK. The HAUV and its docking station will be dropped off for a mission, similar to a demonstration at the ORE facility in Blyth. On this occasion, it will not interface with any of the wind farm infrastructure. “However, to plug the docking station into a wind farm, to access power and communications would be relatively straightforward”, says Ward, “as there’s already available power and data infrastructure used for work on the turbines that we can tap into.”

    Images: Modus Seabed Intervention

    Last year, Modus deployed a HAUV offshore NW Australia to perform circa 240km of pipeline integrity survey, producing stunning images, as well as point cloud data, of both the pipeline and passing marine life (see inset with detail of the shark’s teeth, taken at 2knts) using a Cathx Scout laser profiling and HD imaging spread alongside a multibeam echosounder (MBES).

    The survey time was half of what it would have taken using a traditional ROV to perform the survey and it could have been faster,” says Ward. “Such a survey is possible without a tether, but it was performed with a tether on this occasion so that real time data could be collected.”

    For navigation, the vehicle used USBL aiding to follow a route position list from as-built charts of the pipeline.  This can be combined with the autonomous pipe tracking algorithm which uses pipe profile data collected for the MBES to follow the pipe route.  This is particularly helpful if the as-built position is not accurate which may be caused by inaccuracy caused by positioning tolerances. “Because of these systems the AUV can, in effect, see the pipeline, it means that USBL aiding isn’t always required to perform a pipeline inspection, enabling autonomous operations away from support vessels,” says Ward. “The CathX Laser system provides a very high-resolution point cloud of the pipeline and adjacent seabed. The Laser and MBES point clouds were combined in post processing and used to assess position and possible freespans. The very high resolution obtained from the laser system makes it suitable for spool deflection and other photogrammetry-based metrology surveys.”  

    Because the vehicle is stable, quiet and can fly at a constant height above the pipeline, imagery and measurements produced from laser-based point clouds, stitched together with the HD camera imagery, is highly accurate and easy to process.

    One of the markets Modus is targeting is offshore wind. Turbine array fields are often in high current areas, so in 2017 the company put its HAUV to the test at a hydroelectric plant in Sweden, where the 4.5kt speed capable vehicle demonstrated its ability to maintain position and maneuver successfully in 3kts of current. At offshore wind sites, often there are walk-to-work service vessels deployed in field for maintenance activities, these are effectively hotel boats with a lot of redundant time.  We have developed HAUV to be able to be deployed and recovered from these vessels essentially replacing the need to mobilize an ROV vessel to perform inspection activities. It makes the service vessel more valuable.

    For Modus, it is not just about visual inspection. The company has also been trialing Force Technology’s FIGs system, which can do non-contact cathodic protection surveys at 4knts, alongside while doing GVI survey.

    “Saab have designed a robust subsea vehicle and we have developed it further so that it can be operated as a class leading survey and inspection vehicle,” says Ward. “We have focused on how the sensors are integrated, how they talk to each other, mission software and we are now moving into artificial intelligence and machine learning capabilities. We can already say ‘go here, if you see a pipeline, follow it, or if you see a monopile, perform an inspection around its circumference’. This has all been demonstrated in trials.  The next set of autonomous developments will be very exciting. In the near term we want to develop the HAUV track and survey buried cables autonomously. Various pipe tracking technologies are currently being trialed.  This is expected to be a quick development as we can use similar algorithms to those used to track visible pipelines.”
    It’s not been an easy journey, but Ward sees that some are seeing the potential. “There is no doubt we have faced challenges in bringing this technology to market,” he says. “Primarily, many companies want to carry on doing operations the way they always have, for example some operators still specify ROV and boom cameras for pipeline inspection.  But those customers who have embraced this HAUV, that require a slightly different approach to tackling GVI, have reaped the benefits in cost savings and improved data quality.

    “HAUV has been fully commercially operational for nearly a year now, it has a growing track record and we are very excited about the further optimizations and features that we plan to commission over the coming months, in addition to welcoming our second HAUV to the fleet in a few months’ time."

  • new anchor-handling routine. Other new features included are: enhanced topographic laser capabilities, integration of Leica and Reinshaw topographic laser system, support for multiple navigation devices, export for 3D printers, vector-scaled soundings in HYPACK SHELL         and HYPLOT (WYSIWYG), multiple

  • and cheaper to build." v With BOC Gases and the University of Liverpool providing the basic technology and process license for LASOX, Alabama Laser Systems carried out pre-production development of the lab based process and the integration into the existing laser cutting system at Bender Shipbuilding

  • , which is why pre-and post-hull deflection measurements are crucial for proper alignments. AME uses the Levalign Ultra, a self-leveling rotating laser system to conduct this procedure which is vital to successful haul-outs. Likewise, a final laser alignment check should be done oncethe vessel has been

  • which trans-formed strains to stresses and deflections. Planning the Tests Instrumentation other than that for primary ship-girder deflection (the laser system) was limited to a single "tank group," consisting of center tank and adjacent wing tanks bounded by two adjacent oil-tight transverse bulkheads

  • Diego, Calif., is being awarded a $3,309,473 cost-plus-fixed-fee contract for the design, fabrication and testing of a rep-rated diffraction limited laser system for use in setting up and testing atmospheric compensation apparatus. Work will be performed in San Diego, and is expected to be completed December

  • MR Feb-24#48 Index page MR Feb2024:MN INDEX PAGE  2/8/2024  11:05 AM)
    February 2024 - Maritime Reporter and Engineering News page: 48

    Index page MR Feb2024:MN INDEX PAGE 2/8/2024 11:05 AM Page 1 ANCHORS & CHAINS MILITARY SONAR SYSTEMS tel:+44 (0) 1752 723330, [email protected] , www.siliconsensing.com Anchor Marine & Supply, INC., 6545 Lindbergh Houston, Massa Products Corporation, 280 Lincoln Street, SONAR TRANSDUCERS

  • MR Feb-24#44  
greeninstruments.com
on-site laser measurement of the rudder)
    February 2024 - Maritime Reporter and Engineering News page: 44

    services. Recently a monitoring techniques. team carried out a job taking place in Canada for a cargo ship. The task was greeninstruments.com on-site laser measurement of the rudder line and on-site machining of the rud- GE Vernova der horn casting. MarineShaft delivered justing the number of installed

  • MR Feb-24#42 OPINION: The Final Word
GAO: USCG Should Address 
Workforce)
    February 2024 - Maritime Reporter and Engineering News page: 42

    OPINION: The Final Word GAO: USCG Should Address Workforce Recruitment and Retention Challenges By Heather MacLeod, Director, GAO’s Homeland Security and Justice team he Coast Guard has strug- Coast Guard established cyberspace as vessels to determine whether they meet gled for years to recruit an

  • MR Feb-24#39 15,000 TEU AMMONIA CONTAINERSHIP
000 TEU Containership
the)
    February 2024 - Maritime Reporter and Engineering News page: 39

    15,000 TEU AMMONIA CONTAINERSHIP 000 TEU Containership the problematic area of adding carbon like you have with other alternative fu- “Safety has been at the els. When you start to add components center of the design, and into that, carbon is one of the most dif- it will continue to be so ? cult ones

  • MR Feb-24#36 HYBRID 
2-stroke controllable pitch 
propeller PTO powertrai)
    February 2024 - Maritime Reporter and Engineering News page: 36

    HYBRID 2-stroke controllable pitch propeller PTO powertrain Source: MAN Energy Solutions how the system is intended to operate, says Oskar Levander, VP Strategy & Business Development, Kongsberg Maritime. For example, a primary shaft-driven PTO rotates whenever the engine is running; a secondary one

  • MR Feb-24#35 PTI/PTO
30 years ago shaft generators with PTI capability)
    February 2024 - Maritime Reporter and Engineering News page: 35

    PTI/PTO 30 years ago shaft generators with PTI capability kept container ships sailing at top speed. That purpose gone, PTI/PTO is making a new comeback in more cargo shipping segments, this time for reducing emissions. By Wendy Laursen etro? tting a shaft generator is not an insigni? - the ef? ciency

  • MR Feb-24#33 EAL  AND STERN TUBE DAMAGES
STACKING 
not forget any oil)
    February 2024 - Maritime Reporter and Engineering News page: 33

    EAL AND STERN TUBE DAMAGES STACKING not forget any oil leak, big or small, can be catastrophic to the marine environment and marine life, with some EALs found to THE DECKS be only slightly less damaging than the phased-out traditional WITH BEST-IN-CLASS MARINE oils,” said VP of Business Development

  • MR Feb-24#31 EAL  AND STERN TUBE DAMAGES
“Our recommendations 
“A good)
    February 2024 - Maritime Reporter and Engineering News page: 31

    EAL AND STERN TUBE DAMAGES “Our recommendations “A good bearing are simple. Please design is have good control over important.” your oil quality in the primary barrier, the aft – Øystein Åsheim Alnes sealing system,” Head of section for Propulsion and Steering, – Arun Sethumadhavan DNV

  • MR Feb-24#28 COVER FEATURE
times of con?  ict or in other national)
    February 2024 - Maritime Reporter and Engineering News page: 28

    COVER FEATURE times of con? ict or in other national said Ebeling. “If you look at Iraq and tors bring to the table, all provided by emergencies, and the program also Afghanistan, 98% of those cargoes the MSP ? eet, and it would cost the provides DoD access to MSP partici- were transported to the

  • MR Feb-24#25 MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY)
    February 2024 - Maritime Reporter and Engineering News page: 25

    MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY POWER SYSTEMS, WABTEC fuel blends up to 100% are in operation maintenance intervals to make sure that What’s the biggest challenge today, running on both biodiesel and re- our engines don’t have to be touched in your job? newable diesel blends.

  • MR Feb-24#23 MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY)
    February 2024 - Maritime Reporter and Engineering News page: 23

    MATTHEW HART, MANAGER & PLATFORM LEADER, MARINE & STATIONARY POWER SYSTEMS, WABTEC “Wabtec achieved Tier 4 NOx and PM without the use of aftertreatment, which sets our product apart from the competition in unlocking logistical ? exibility and life-cycle cost savings for the owner.” Photo Wabtec Matthew

  • MR Feb-24#22 R&D
MATT HART 
Matt Hart, Manager & Platform Leader)
    February 2024 - Maritime Reporter and Engineering News page: 22

    R&D MATT HART Matt Hart, Manager & Platform Leader, Marine & Stationary Power Systems, Wabtec, offers insights on how the megatrends of decarbonization, energy transition and autonomy all inspire Image courtesy Wabtec and impact the marine power solutions from Wabtec. By Greg Trauthwein Matt, to start

  • MR Feb-24#20 MARKETS
FPSO technology dominates the region’s FPS demand.)
    February 2024 - Maritime Reporter and Engineering News page: 20

    MARKETS FPSO technology dominates the region’s FPS demand. duction and storage of low and zero emission energy carriers, In all, 18 countries in West and East Africa are expected such as methanol and ammonia. One exciting development to receive new FPSOs, FLNGs and FPUs between 2024 and leverages

  • MR Feb-24#18 MARKETS
Scan the QR Code to 
Download the Intelatus)
    February 2024 - Maritime Reporter and Engineering News page: 18

    MARKETS Scan the QR Code to Download the Intelatus Floating Production White Paper. Floating Production – A growing segment in transition © AdobeStock_Dolores Harvey The specialized deepwater oil & gas and ? oating offshore wind segments will share many of the same stakeholders and supply chains

  • MR Feb-24#17 METHANOL STORAGE
provals from other classi?  cation)
    February 2024 - Maritime Reporter and Engineering News page: 17

    METHANOL STORAGE provals from other classi? cation societies are ongoing, said Lilp, – including accommodation.” although he acknowledges that journey from AiP to full class ap- As of September 2023, methanol had been speci? ed for 216 proval is substantive. In an area where the regulations underlying

  • MR Feb-24#16 THE PATH TO ZERO
Methanol’s Superstorage Solution  
Technica)
    February 2024 - Maritime Reporter and Engineering News page: 16

    THE PATH TO ZERO Methanol’s Superstorage Solution Technical inquiries to SRC Group ramped up after it received Approval in Principle (AIP) for a concept which ‘reinvented methanol fuel storage’ on board ships. Delivering the answers has seen technical talk converting into project discussions

  • MR Feb-24#15 Cruise ships can be cleaned during normal passenger)
    February 2024 - Maritime Reporter and Engineering News page: 15

    Cruise ships can be cleaned during normal passenger transfer port calls. Cleanings and cargo operations can occur simul- taneously. How is this possible? The EverClean robots are small and require only a single cargo van on the pier. Multiple robots can be deployed simultaneously. Precision navigation

  • MR Feb-24#14 The Path to Zero – Sponsored
EverClean
The always clean)
    February 2024 - Maritime Reporter and Engineering News page: 14

    The Path to Zero – Sponsored EverClean The always clean performance solution • • • • Save fuel Reduce carbon Minimize downtime Maintain biosecurity Improve performance T e Four E’s of Marine Sustainability: EverClean’s Solution to Biofouling t is a new year, but the age-old problem of biofouling per-

  • MR Feb-24#11 down to a smaller size, and especially a smaller width)
    February 2024 - Maritime Reporter and Engineering News page: 11

    down to a smaller size, and especially a smaller width relieves waterfront infrastructure footprints and costs. that issue. One may argue that one human with a bigger truck These 5-foot wide units will zip through the city much faster can deliver more cargo than one human with a smaller truck, and

  • MR Feb-24#10 Back to the Drawing Board 
Let’s Set Some Standards for)
    February 2024 - Maritime Reporter and Engineering News page: 10

    Back to the Drawing Board Let’s Set Some Standards for Micro Cargo By Rik van Hemmen s zero carbon cargo efforts are progressing, it is becoming more apparent that the lowest hanging fruit is in the last few miles. This is where a large amount of carbon is expended in delivering small A parcels to

  • MR Feb-24#9 Simulation is a great example. This  addressing the)
    February 2024 - Maritime Reporter and Engineering News page: 9

    Simulation is a great example. This addressing the challenges of cultural novation, and a dedication to continuous technology offers a great avenue for and language barriers in training, the improvement, we can ensure a safer and improvement, providing realistic train- industry can not only improve

  • MR Feb-24#8 Training Tips for Ships
Tip #56
Addressing Cultural and)
    February 2024 - Maritime Reporter and Engineering News page: 8

    Training Tips for Ships Tip #56 Addressing Cultural and Language Barriers in Maritime Training By Murray Goldberg, CEO, Marine Learning Systems n the maritime industry, our inherently diverse workforce ciency. So what, speci? cally, are the issues and what can we is both a great value and a source of

  • MR Feb-24#5 EverClean
The always clean performance solution
Save)
    February 2024 - Maritime Reporter and Engineering News page: 5

    EverClean The always clean performance solution Save fuel Reduce carbon Minimize downtime Maintain biosecurity Improve performance EverClean™ now includes EverClean IQ Our groundbreaking data solution designed to assist commercial vessel owners in understanding the general health of their hulls. VISIT

  • MR Feb-24#4 Authors & Contributors
MARITIME
REPORTER
AND
ENGINEERING)
    February 2024 - Maritime Reporter and Engineering News page: 4

    Authors & Contributors MARITIME REPORTER AND ENGINEERING NEWS M A R I N E L I N K . C O M ISSN-0025-3448 USPS-016-750 No. 2 Vol. 86 Maritime Reporter/Engineering News Goldberg Haun (ISSN # 0025-3448) is published monthly Galdorisi except for March, July, and October by Maritime Activity Reports, Inc.