Page 50: of Maritime Reporter Magazine (March 1971)

115 VOLTS D.C. TO 115 VOLT SINGLE PHASE A.C. $28950

NEW JANETTE 1 KVA SETS

INPUT: 2 HP 115 volts DC—3.5 amps.—1800 RPM. OUTPUT: 1

KVA—-120 volts single phase

A.C.—.8 PF—40°C rise.

UNUSED SURPLUS 1 KVA SETS

INPUT: 1.75 HP—115 volts DC — 17 amps—1800 RPM. OUT-

PUT: 1 KVA—115 volts—8.7 amps—60 cycle single phase— 0.9 PF. Unit is self excited and will carry load immediately on starting. Regulation ± 5%.

Complete with magnetic starter & spare parts. Units designed and built to rigid Navy specs.

SIZE: 19.5" long—26.5" wide— 16" high. Weight 285 lbs.

SPARES: 85 lbs. CONTROLS: 20" x 15" x 10"—75 lbs. 5 KW — 120/1/60 A.C. — UNUSED 10 HP 115 VDC TO 5 KW 120 VOLTS

SINGLE PHASE AC

INPUT: 10 HP—115 volts DC — 78 amps — 1800 RPM.

OUTPUT: 5 KW—115 volts single phase A.C. 4-bearing —with 10 HP 115 volt D.C. magnetic starter.

FIRST TIME IN A LONG TIME THAT 5 KW

UNITS ARE ON THE MARKET 25 HP 115 VDC TO 12.5 KW 120/1/60

NEW—UNUSED

MG SETS

Mfg. by KATO Electric Co. IN-

PUT: 25 HP—115 volts DC— 160 amps—1800 RPM. OUT-

PUT: 12.5 KVA—120 volts sin- gle phase. Westinghouse mag- netic controller. 36'7x20"xl8'/i . 230 VOLT D.C. INPUT-115

VOLT SINGLE PHASE OUTPUT 30 HP 230 VDC TO 20 KW 120/1 A.C.

FIDELITY ELECTRIC

MG SETS

INPUT: 30 HP—230 volts DC 120 amps 1800 RPM. OUTPUT: 20 KW—25 KVA—120 volts AC 208 amps—single phase. Excel- lent condition.

UNUSED CONTINEN-

TAL MG SET

INPUT: 7'A HP 230 volts DC 36 amps 1800 RPM. OUTPUT: 5

KW 10 KVA 120 volts single phase 60 cycles AC. 440/3/60 A.C. OUTPUT 25 KW MG SETS 115 DC to 440/3/60 A.C.

INPUT: 40 HP—115 volts DC— 290 amps—1800 RPM. OUT-

PUT: 31.5 KVA—25 KW—440/ 3/60. Complete with motor and generator control.

INQUIRE ABOUT MANY MORE

SIZES NOT LISTED HERE

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

UNUSED BITTS

Single bitts—6" diameter— 24V2" long—8" wide. Not shown is 90° bracket. While they last.

BUY IN QUANTITY $19^5 EACH

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

PROPULSION SHAFTING

Ex-Tank Lighter Craft — 2" diameter — 66Va" OAL.—bronze coated throughout —threaded, tapered keyway. Ex-Tanker

Lighter part No. M-10151. 100 available. $695 EACH

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

HIGH PRESSURE

STARTING AIR TANKS 600 lb working pressure—1200 lb test pressure—I6V2" diam- eter—7' 3" overall length. $26950

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

UNUSED 10x9x12 VERTICAL SIMPLEX

FUEL OIL TRANSFER PUMPS

Furnished on some T2 tankers. 160 GPM Bunker C—viscosity 70 to 700 SSF ?22°F @ 100 lbs discharge press. WP steam 150# —exhaust 10#. ^V*" Steam In- let—1 Vj" exhaust. 4" pump suc- tion—31/2" discharge. $1250

THE BOSTON METALS COMPANY 313 E. Baltimore St. 539-1900

Baltimore, Md. 21202 (301) 355-5050

CYCLOTHERM SELF-CONTAINED « AUX. BOILERS

Oil burning 0 2500 Ibs/hr. Design in z: 125 lbs- S pressure 12 lbs—WP 100 lb» pass. Complete with self-contained motor-driven blower 5HP—440/3/ 60—Fuel Oil Service pump 3 HP— 440/3/60. Burner is pressure atom- izing type. $795.00 each

YOUR INSPECTION INVITED

THE BOSTON METALS COMPANY 313 E. Baltimore St. 539-1900

Baltimore, Md. 21202 (301) 355-5050

DIESEL FIRE & GENERAL SERVICE PUMP 500 PSI @ 100 lbs—with self-priming attachment

Mfg by John Reiner & Co.—DP-60 —diesel engine 4 cyl. Continental— electric starting — 42 HP — T800

RPM. PUPM: 500 GPM—100 PSI— 4" suction—4" discharge. Unused.

HAZARDOUS DUTY

DEEP WELL PUMP 4x4—for cargo oil, water, gasoline, bilge, etc. MOTOR: Westinghouse—

U.L. approved for hazardous duty—3

H.P.—220/440/3/60—3450 R.P.M. —9 foot shaft. 300 G.P.M. @ 60'— 4 units available. $447.50 each

THE BOSTON METALS COMPANY 313 E. Baltimore St. 539-1900

Baltimore, Md. 21202 (301) 355-5050

UNUSED 10KW SUPERIOR

DIESEL GEN. SETS

GENERATOR: Delco 10-

KW—120 volts DC — 83.3 amps—1200 RPM.

ENGINE: Superior diesel — 2 cylinder—4Vi x 5%—15 HP—heat ex- changer cooled.

ONLY 9

UNITS LEFT

PRICED TO SELL!

While They Last $1395

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

UNUSED AURORA PUMP $877.77 300 GPM—37' head—5 HP— 120 volts DC Centrifugal Pump.

Bronze — size 5x4 — flanged.

MOTOR: Reliance—super T.D.C.

Electric Motor—5 HP—120 VDC — 36.8 amps — 1750 RPM —

Frame L216A—with control by

Cutler-Hammer. Excellent con- dition. Latest USN surplus.

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202 539-1900 (301) 355-5050

UNUSED 500 KW 120/240 VOLT D.C.

BALDWIN/ALLIS CHALMERS

DIESEL GENERATOR SET

ENGINE: Baldwin-DeLaverne 725

HP—12-2/3"xl5Vi"—8 cyl.—500

RPM — air starting. Dry weight 54050 lbs. GENERATOR: Allis-Chal- mers 500 KW—120/240 V.D.C.— 1500 RPM — 550 RPM overspeed. '60°C rise—class B insulation—3- wire—25% unbalance—2083 amps —stab, shunt—open—drip-proof— self-ventilated—8 poles.

THE BOSTON METALS COMPANY 313 E. Baltimore St. 539-1900

Baltimore, Md. 21202 (301) 355-5050

MODEL 0-2-D M&T UNITS

RECONDITIONED

Hydraulic starting, steering, raising & lowering tailfin.

CONDITION: Navy recondi- tioned 1965—fully checked out by us. Will demonstrate running. Weight about 9500 lbs. PROPELLOR: 48" x 24" —3-blade.

THE BOSTON METALS COMPANY 313 E. Baltimore St. 539-1900

Baltimore, Md. 21202 (301) 355-5050 52 Maritime Reporter/Engineering News