Page 30: of Maritime Reporter Magazine (April 15, 1973)

DIESEL

GENERATOR SETS 250 KW DIESEL

GENERATOR SET

ENGINE: Enterprise 12 x 15

DSG-6—6 cyl.—450 RPM crank No. 50J. GENERATOR:

Westinghouse 250 KW—120 /240 DC—1040 amps—450

RPM. Typical serial No. 3S- 1 OP - 913. Complete with switch gear.

EMERGENCY GENERATOR

SUPERIOR 75KW 120/240 VOLT D.C.

DIESEL GENERATOR SET

With switchgear. ENGINE: Radiator cooled Superior

GBD-8—6 cylinder—1200 RPM GENERATOR: Electric

Machinery Co.—120/240 volts DC—316 amps—1200

RPM—stab, shunt.

UNUSED 10 KW SUPERIOR

DIESEL GENERATOR SET

GENERATOR: Delco 10 KW — 120 VDC — 83.3 amps— 1200 RPM. ENGINE: Superi- or diesel—2 cyl.—4'Ax5% — 15 HP — heat exchanger cooled. 500 KW— 120/240 VOLT DC

DIESEL GENERATOR SET

EQUAL TO NEW

GENERATOR: Allis Chalmers—Compound wound. Has

Class "A" insulation. Output 500 KW—120/240 volts

DC—2080 amperes—720 RPM—drip-proof—self-cool- ing. Ambient 50°C—temperature rise 40°C. ENGINE:

Model GM 8-278—2-cycle—Vee type—8i/2"xlOVi"— air starting—720 RPM. Complete with switchgear.

Condition very good. Stilll aboard naval vessel. Has

Ross shell & tube type lube oil & raw coolers—temp, control valve—shock mounts. 400 KW WESTINGHOUSE

TURBO GEN SETS FOR

BETH. SPARROWS PT.

HULLS 400 TO 4500;

QUINCY HULLS 1600 400 KW (500 KVA)—80% PF—1200 RPM—450/3/ 60. TURBINE: 585 lbs—840"TT—28'A" vacuum— 9018 RPM—serial 10A4462-3 & 10A4462-4. GEAR: 9018/1200 RPM. A.C. GENERATOR: 500 KVA—<00

KW—450 volts—641 amps—80%PF—3 phase 60 cycle—1200 RPM—CR 40*—excitation amps 41 — excitation voltage 120. Instruction book 5442. Switch- gear available. 300 KW

DIESEL

GENERATOR

SET

ENGINE: G.M. 6-278—6-cylinder—2 cycle— 83/4"X]oy2"—750 RPM—with oil and water

Ross Shell and Tube Heat Exchangers, instru- ment panel, pyrometer, etc. Vibro Isolators.

GENERATOR: G.E. 300 KW—120/240 volts DC —1250 amps—shunt wound—continuous over- load rating 375 KW—2 hours—55° Weight of unit approximately 26,000 pounds. Complete with shock mounts. Unit 13' 2" long, 64" wide, 8' high.

TURBO

GENERATOR SETS

UNUSED 300 KW—240 VOLT DC

WESTINGHOUSE LOW-PRESSURE

TURBO-GENERATOR SET

GENERATOR: 300 KW—240 VDC—1250 amps— 1200 RPM. GEAR: 5286/1200—frame 6x15—serial 10A-2612-4. TURBINE: Frame C-325—225 PSI—397°

TF—5286 RPM—Serial 10-A-2611-4. Wt. 16,700 lbs. —complete in original factory crate.

WESTINGHOUSE 440/3/60 200 KW UNIT

GENERATOR: Westinghouse 200 KW—250 KVA— 450/3/60—1200 RPM—80% PF—with 40 KW—120

VDC on same shaft. GEAR: 9989/1200 RPM—double helical. TURBINE: Westinghouse — 540 PSI—super- heat 322° F. Test 930 PSI 800°TT. Also operate 615

PSI—850°TT. 1250 KW G.E. 10-STAGE

TURBO GENERATOR

SET

TURBINE: 525—615 PSI—850°TT—7938 RPM—10- stage—type FSN. GEAR: Single helix—7938/3600.

GENERATOR: 1250 KW—450/3/60/3600—.80 PF— type ATB with surface air cooler. Overload 25%— 2 hours—1563 KW. 10 14 15

UNUSED 300 KW G.E. 120/240 VOLT DC

TURBO-GENERATOR SET

GENERATOR: 300 KW—120/240 VDC—1250 amps— 1200 RPM. REDUCTION GEAR: 8.344:1 — 10012/ 1200 RPM—type S-182. TURBINE: DOR418N—449

H.P.—10012 RPM—working pressure 180/220 PSIG. 11 6 EQUAL-TO-NEW

LATE TYPE 500 KW

SHIPS SERVICE TURBO

GENERATORS 1962—DeLaval. Very lit- tle use. Completely pre- served with rotors and diaphragms crated sepa- rately. TURBINE: DeLaval —585 PSI — 840°TT—6- stage—6391 RPM—class

CD — Also suitable 440 lbs.—740°TT—25" vac. GEAR: 6391/1200 RPM.

GENERATOR: Allis-Chalmers—450/3/60. Totally enclosed, with static exciter and voltage regulator system. Weight 17,665 lbs. Complete with latest dead front switch gear. Also available are the con- densers, circulating and condenser pumps. All very up-to-date, compact construction. Turbines will easily handle 600 KW if up-grading is desired. 12 13

AP2 VICTORY

WORTHINGTON-

MOORE

CROCKER-WHEELER 300 KW UNIT

TURBINE: 440 PSI—740°TT—28VV' vacuum—type

S4 — 5-stage — 6097 RPM —serial 7547 & 7548.

GEAR: 6097/1200. GENERATOR: 300 KW—120/240 volts DC—1250 amps—compound wound—973643— 999759. Armature flange 8'/2"; B.C. 7"—12 holes.

ALSO NEW ARMATURES IN STOCK & 300 KW

SHUNT ARMATURES.

VICTORY 300 KW

WESTINGHOUSE TURBO

GENERATOR SET 440# — 740°F — 5930 RPM — 2A-9794-15-16-17 — coupling non-recessed on steam end of pinion—5%".

GENERATOR: Westinghouse 300 KW—120/240 DC— 1250 amps—1200 RPM—C.B. 208.4.

UNUSED

CROCKER-WHEELER 500 KW

GENERATOR ENDS ONLY 120/240 VOLTS D.C.—1200 R.P.M.

FORMERLY USED WITH WORTHINGTON-

MOORE TURBINES & GEARS

Upgraded by U.S. Navy—rewound in glass.

Generator Frame and Armature—Marine 500 KW type 3-1200—dripproof enclosure—base mount.

Modified from Crocker-Wheeler generator frame 152HD — 240/120 volts DC — 2083/521 amps— 1200 RPM. Ambient temperatures 50°C. APPLICA-

TION: For C-4-SA1; C4-SA-3; T-AP-134 vessels, using Worthington-Moore Turbine—-Form S-6 and generator Form 14 x 10. No pedestal bearing.

FOR USE ON NEWPORT NEWS

VESSELS—HULLS 480 to 541

CLASS—SIMILAR TO

ESSO LIMA CLASS 400 KW WESTINGHOUSE

TURBO GENERATOR

TURBINE 835 lbs—840°TT—9018 RPM—instr. book 1430

CI—serial 5A-7090-7 and 5A-7090-8—6-stage.

REDUCTION GEAR 9018/1200 RPM

A.C. GENERATOR 400 KW—450/3/60/1200 RPM—rise 40°C—100% and 58°C—125%. In book 5442. Serial 3S-35P792 and 4S-35P792. 5.5 KW—125 volts- 44 amps.

EXCITER -shunt wound—frame 6-83—

Main Office: (30

TURBINES & ROTORS 16 17 18

BETH CLASS SERIES

TURBINE—13,600 H.P.

SPARROWS POINT 4400-4500 SERIES

QUINCY 1600 SERIES HULLS 28,000 GT/29,000 GT

ONE H.P. TURBINE—BUILT 1949 600 LBS.—860°F—SHAFT

HORSEPOWER 6150 AT 4773

RPM—SERIAL #1630-H-4 6690 H.P.

HIGH PRESSURE 7-STAGE TURBINE

ORIGINALLY BUILT FOR

ESSO CHRISTOBOL—NEWPORT NEWS 6690 H.P. AT 7862 RPM

PRESSURE 835 LBS GAUGE

TEMP. 840°F—SERIAL 83343

FOR EMERGENCY USE

In an emergency, this HP turbine could substitute for

Newport News built HP with piping and foundation change. 19 STAGE

WESTINGHOUSE

H.P. ROTOR FOR

AP2 VICTORY

Reconditioned — balanced— with ABS. Serial 4A-2079— type B — 19 stage reaction blades. Excellent — just out of shop. 13" Flange diameter with 14 bolts. 19 8500 H.P. G.E. TURBINE

G.E. Instruction book GEM 6263—from ex-Navy

Victory. L.P. — 8-stage—3509 RPM —77943

H.P.—8-stage—6159 RPM—77942.

WILL INTERCHANGE WITH

INGALLS C3 HULL—442 CLASS

AND SUN-BUILT C4 VESSELS 20 NEW LP. BLADE RINGS for large 8500 H.P. Victory

Joshua Hendy Westinghouse 21

SPECIAL! 1 WESTINGHOUSE

COMPLETE T-2

MAIN TURBINE

PROFILE (UNSHROUDED) 6600 HP—435 PSI—750°F 28" YAC.—3720 RPM

Instruction Book 6893—Serial #2A-9361-21.

The turbine rotor blades, stationary blading, diaphragms and nozzles are all in unusually good condition.

IMMEDIATE DELIVERY—WITH ABS