Page 29: of Maritime Reporter Magazine (October 15, 1973)

on urns CO.

RE ST. • BALTIMORE, MD. 21202 539-1900 Marine Dept.: (301) 355-5050 25 26 27 28 29

VICTORY SHIP AP2 H.P. & L.P. TURBINES

NEW—UNUSED — 6000 H.P. SETS

G.E.—H.P. & L.P.—with throttle valve

Westinghouse—L.P.—with throttle valve

Allis-Chalmers—H.P & L.P.—with throttle valve 6000 H.P. G.E. — NORTH CAROLINA C-2

H.P.—8-stage—serial 78040

L.P.—7-stage—serial 78043

G.E.I. 16262 19 STAGE

WESTINGHOUSE

H.P. ROTOR FOR

AP2 VICTORY

Reconditioned — balanced— with AB5. Serial 4A-2079— type B — 19 stage reaction blades. Excellent — just out of shop. 13" Flange diameter with 14 bolts.

G.E. 8500 H.P.

REDUCTON GEAR

FOR LARGE AP3

VICTORY & C3

MD-48A—8500 HP- 3509/763/85 RPM.

ALSO 6000 H.P. VICTORY

AP2 REDUCTION GEAR

Westinghouse 4A-1640.

PUMPS -6159/ 30 31

CARGO

STRIPPING

PUMPS

BRONZE T2 TANKER

STRIPPING PUMPS 14x14x12—700 GPM at 100 lbs. Same pump avail- able in steel for fuel oii transfer, etc.

WORTHINGTON 16"xl4"xl8"

VERTICAL DUPLEX

STRIPPING PUMP 1400 GPM @ 110 PS1— suction lift 11.5 ft.—- steam back pressure 15 lbs. Suction 14" —dis- charge 10"—steam 2Vi" — exhaust 4". Overall width 6'8"—overall height 9'H/2" — depth 3'91/2"— wt. approx. 10,000 lbs. 32 33

UNUSED DELAVAL

IMO ROTARY PUMP 175 GPM—35 PS1G—10 HP — 120 volts DC—1750 RPM —serial E-8619—frame 324

VY—76 amps—mfg. by Elec- tro Dynamics. With magnetic control. Excellent condition.

NEW TURBINE DRIVEN FIRE

AND GENERAL SERVICE PUMP

Allis-Chalmers 6x5 pump, type SKH—1200 GPM—125

PSI—3500 RPM. Coppos tur- bine type TF-22-21/2 — 3500

RPM. 273#—50° superheat. 34

DAYTON-DAWD 2-STAGE

FIRE

AND

BILGE

PUMP

Vertical 2-stage type TDV-10—20 HP—20 GPM @ 184'—3" discharge—4" suction—1775 RPM—Mau- mee Sun. Motor: 120 volts DC—20 HP—1775 RPM. 35 36 37 38

BOILER FEED

PUMPS

Suitable for Navy and

Merchant Vessels

COFFIN

TYPE

CG-4A

FEED PUMP 2 Available—very little use. Maximum 325

GPM—1760' head or 750 lbs Steam inlet 575 lbs. — 540°TT — exhaust 20 lbs. — speed 760

RPM.

UNUSED DD445 CLASS WORTHINGTON

TURBINE-DRIVEN FEED PUMP

Worthington — draw- ing SL5043—425 GPM —1675' total dyna- mic head—5000 RPM 3-stage — double suc- tion. Flanged 41/2" inlet—4" outlet. Pow- ered by Sturtevant steam turbine—282 HP— 590 PSI. For Fletcher DD-445 Class Destroyers.

BUFFALO

SIZE 4

FEED PUMPS

Terry Turbine—BM—273 HP—550 RPM—ex- haust 15 lbs—590 PSI—superheat 0°—425

GPM Buffalo Pump—discharge pressure 750 lbs—5"x4"—built for USN DD destroyers. DD 445 Class Fletcher.

WORTHINGTON 3-STAGE UNUSED

BOILER

FEED PUMP

PUMP: 5" Worthington—460 GPM @ 750 PSI —5000 RPM—305 HP—steam flow 8052/hr— 26.4 lbs HP hr. TURBINE: Sturtevant C-22— type 21—575# dry saturated steam—15 lb. back pressure—259°F water temperature—15 lbs/inch suction pressure.

INGERSOLL-RAND BRONZE CARGO PUMP 10GT—4500 GPM at 125 lbs.—2-stage—size 14x12. 40

C-25

CARGO PUMP TURBINE

SPARE GEARS

One set of gears available for Westinghouse C-25

Cargo Pump Turbine.

MISCELLANEOUS 41 42 43 44

DOUBLE

REDUCTION GEARS for Diesel Drive 3200 HP

DOUBLE INPUT

SINGLE OUTPUT

DIESEL

REDUCTION GEARS 20 DEGREE OFFSET

Farreii-Birmingham — 3200 SHP. REDUCTION

GEAR: 1.81:1—handles two 1600 HP diesels @ 720 RPM. With hydraulic couplings & Fa- wick clutch. Port and starboard. Gear output 400 RPM. Suitable for dredge pumps. Non- reversing. OK for 38D8-'/8 engine. 2:67:1 RATIO

DOUBLE IN-LINE GEARS

Farrell-Birmingham 3200 HP non-reversing — from seaplane tenders. Ratio 1.867:1. Complete with hydraulic couplings, etc. Will handle two 38D8-'/s FM diesels. Has Fawick clutch. 2100 HP DOUBLE INPUT

SINGLE OUTPUT GEARS—3:435:1 RATIO

Farrell-Birmingham — heavy duty — originally built for 2 heavy-duty direct-reversing engines —300 RPM—1050 HP each. Ratio 3.435:1.

SINGLE ENGINE REDUCTION GEAR

Farrell-Birmingham — non-reversing—1600 HP at 2.4909:1. With hydraulic couplings. 45

Hyde 2-11/16' lbs. 46 47

ANCHOR WINDLASS '—12x14 — 100 PSI —steam —54,100

SHARPLESS

LUBE & DIESEL

OIL PURIFIERS

Type M-34-W22-UM—15,000

RPM. BOWL MOTOR: 2 HP —230 volts DC—8.5 amps— 3450 RPM—250 to 300 GPH.

Originally built for C-I-A diesel vessels.

UNUSED 1135 SQ. FT.

C.H. WHEELER

CONDENSER 20" Ex. inlet—%" CU-NI tubes—with or without air ejector. 48 |

UNUSED 70 HP

McKIERNAN-TERRY

WINDLASSES

Chain and two 10640 lb anchor & 30 fathoms chain @ 30 FPM. 70 HP—230 volts—shunt DC motors—233 amps—550 RPM—55°C rise. Wildcat centers 47l/2".

Base 9'5" wide x 11' long. Weight 36,000 lbs.

INQUIRE FOR ALL OTHER ITEMS

Forced draft blowers, reduction gear parts, bilge and ballast pumps, main circulators, general service pumps, F.O. transfer pumps, lube oil service, standby feed pumps, condensate pumps, aux. circulating pumps, feed water heaters, wash water pumps, etc.

PLEASE SEND INFORMATION ON THE FOLLOWING: (Please circle items) 10/15/73 3 4 5 6 7 8 9 10 1 1 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 33 34 35 36 37 38 39 40 41 42 43 44 45 48

NAME COMPANY...

ADDRESS POSITION

CITY ZONE.,

PHONE..

STATE