Page 29: of Maritime Reporter Magazine (May 15, 1974)

DIESEL

GENERATOR SETS 350 KW DIESEL

GENERATOR SET 350 KW—120/240 volts DC—600 RPM—compound wound G.E. generator with switchgear. ENGINE: Inger- soll-Rand—heavy-duty type S—505 HP—10Vix'2— reconditioned to ABS. 250 KW DIESEL

GENERATOR SET

ENGINE: Enterprise 12 x 15

DSG-6 — 6 cyl. — 450 RPM crank No. 50J. GENERATOR:

Westinghouse 250 KW—120 /240 DC—1040 amps—450

RPM. Typical serial No. 3S- 10P-913. Complete with switch gear.

EMERGENCY GENERATOR

SUPERIOR 75KW 120/240 VOLT D.C.

DIESEL GENIRATOR SET

With switchgear. ENGINE:

Radiator cooled Superior GBD _8 — 6-cylinder—1200 RPM.

GENERATOR: Electric Ma- chinery Co.—120/240 volts

DC—316 amps—1200 RPM —stab, shunt. 415 KW 250 VOLT DC

GM 6-278 DIESEL GENERATOR

SETS

ENGINE: GM Model 6-278— 6-cylinder — 8V2 x 10'/2 — 2- cycle—800 RPM — complete with heat exchanger. GENE-

RATOR: Allis-Chalmers—415

KW—250 volts DC—800 RPM —1660 amps—shunt wound.

Top mounted exciter—800/ 1600 RPM—208 amps—type

EB5-123. Pilot exciter 21/2KW —120 volts DC—shunt wound—20.8 amps. Both exciters belt-driven from main generator shaft.

ELECTRIC

PROPULSION

MOTOR 1 Available. 515 HP—230 volts DC—shunt wound — 1040/1400 RPM—1660 amps—120 volts DC exciter.

ALSO SUITABLE FOR COMPANIES

OPERATING AN NET TENDERS

TURBO

GENERATOR SETS 400 KW WESTINGHOUSE

TURBO GEN SETS FOR

BETH. SPARROWS PT.

HULLS 400 TO 4500;

QUINCY HULLS 1600 400 KW (500 KVA)—80% PF—1200 RPM—450/3/ 60. TURBINE: 585 lbs—840°TT—28V2" vacuum— 9018 RPM—serial 10A4462-3 & 10A4462-4. GEAR: 9018/1200 RPM. A.C. GENERATOR: 500 KVA—400

KW—450 volts—641 amps—80%PF—3 phase 60 cycle—1200 RPM—CR 40°—excitation amps 41 — excitation voltage 120. Instruction book 5442. Switch- gear available. 8

WESTINGHOUSE 440/3/60 200 KW UNIT

GENERATOR: Westinghouse 200 KW—250 KVA— 450/3/60—1200 RPM—80% PF—with 40 KW—120

VDC on same shaft. GEAR: 9989/1200 RPM—double helical. TURBINE: Westinghouse — 540 PSI—super- heat 322°F. Test 930 PSI 800°TT. Also operate 615

PSI—850°TT. 10 1250 KW G.E. 10-STAGE

TURBO GENERATOR

SET

TURBINE: 525—615 PSI—S50°TT—7938 RPM—10- stage—type FSN. GEAR: Single helix—7938/3600.

GENERATOR: 1250 KW—450/3/60/3600—.80 PF— type ATB with surface air cooler. Overload 25%— 2 hours—1563 KW. 11 6 EQUAL-TO-NEW

LATE TYPE 500 KW

SHIPS SERVICE TURBO

GENERATORS 1962—DeLaval. Very lit- tle use. Completely pre- served with rotors and di- aphragms crated sepa- rately. TURBINE: DeLaval —585 PSI — 840°TT—6- stage—6391 RPM—class

CD — Also suitable 440 lbs.—740°TT—25" vac. GEAR: 6391/1200 RPM.

GENERATOR: Allis-Chalmers — 450/3/60. Totally enclosed, with static exciter and voltage regulator system. Weight 17,665 lbs. Complete with latest dead front switch gear. Also available are the con- densers, circulating and condenser pumps. All very up-to-date, compact construction. Turbines will easily handle 600 KW if up-grading is desired. 12

AP2 VICTORY

WORTHINOTON-

MOORE

CROCKER-WHEIL2R 300 KW UNIT

TURBINE: 440 PSI—740°TT—28'/2" vacuum—type

S4 — 5-stage — 6097 RPM — serial 7547 & 7548.

GEAR: 6097/1200. GENERATOR:- 300 KW—120/240 volts DC—1250 amps—compound wound—973643— 999759. Armature flange 8

ALSO NEW ARMATURES IN' STOCK & 300 KW

SHUNT ARMATURES. 13

TWO 538 KW

WESTINGHOUSE

T-2 AUX. GENERATORS (COMPLETE)

TURBINE: 538 KW @ 5010 RPM—438 PSIG— 750°TT—281/2" vacuum. GEAR: 5010/1200 RPM.

A.C. GENERATOR: 400 KW 450/3/60/1200—0.8

PF. DC EXCITER: 32.5 KW—120 volts (variable voltage)—shunt—4-pole—DC excitation 5 KW.

ALWAYS WELL MAINTAINED BY MAJOR OIL CO.

TURBINES & ROTORS

MAIN PROPULSION 14 15 16

BETH. CLASS—13,600 H.P.

Sparrows Point & Quincy 1600 hulls. H.P. turbine cas- ing only. Excellent blading & labyrinth packing.

H.P. & L.P. COUPLINGS

I Set—for Beth Class 13,600 HP 4400 hulls and

Quincy 1600 hulls.

G.E. 6690 HP @ 7062 RPM

HIGH PRESSURE 8-STAGE

TURBINE 835 lbs—840°TT—#83341—originally built for Esso

Christobol—Newport News.

T-2

TURBINES & ROTORS 17 2 COMPLETE T-2

G.E. TURBINES *r61818 and #61834—large Lynn—all stages magnafluxed.

ROTOR WILL INTERCHANGE WITH

ELLIOTT MAIN TURBINE

Will Sell Rotors Separately 18 19 lehem Steel 1970

T2-SE-A1

MAIN PROPULSION

ROTOR—-G.E.

Large Schenectady — serial 77418 — reconditioned Beth- stages magnafluxed.

T-2 TANKER

UNUSED—4 UNITS AVAILABLE

AUX. G.E. TURBO GEN. ROTORS

DORV — 325M — 5645

RPM — for 525 KW G.E. 20 21 •ftpUND THf

Main Office: (301)

TURBO GEN

TURBINE: 1 1 Stage type FN4— 8145 RPM—3V2" stea absolute back pressure—complete steam with seal regulate

GEAR: Type S-195A—reduction 8145 RPM to 1200 RPA

GENERATOR: 1500 KW —450 volts—2405 amps—12( enclosed. Insulation: Class B stator and rotor. Temperatu thermometer. Mfg type ATI—form HL. Oil lubricated b^ sump in turbo generator set base. Generator cooling: —120 volts —1 10 amps—40°C rise—frame 654—mfc

GENERAL INFORMATION: Overload rating 2 hours—12 weight 36,000 lbs. Guaranteed steam flows & condition flange. The set will carry 1500 KW with steam conditior flange. The set will withstand 644 PSI and 850°F. Gui at exhaust flange: 50% Load — 750 KW — D.C 75% Load — 1125 KW — D.C 100% Load — 1500 KW — D.i

Exhaust flange size: 18" x 38" rectangular.

GENERATOR: 400 KW 450 volts 3-phase 1200 RPM 0.£ sulation—natural self-ventilated cooling. Exciter: 50 KW

GEAR: Single helix—single reduction—10059/1200 RP/^

TURBINE: Six stage—10059 RPM—525 PSI—825°F no] tors. OVERLOAD CONDITIONS AT NORMAL STEAM 52J overload for 2 hours at normal conditions; overload cap^ turbine generator will deliver full load output 400 KW A capable of withstanding 634 lbs PSIG 850°TT.

STEAM FLOWS 100% Load — 400 KW AC — 75% Load — 300 KW AC — 50% Load — 200 KW AC —

When operating at 575 PSIG & 0° Superheat and 1 lb/s| 125% Load — 500 KW AC 100% Load — 400 KW AC 75% Load — 300 KW AC

UNIT DESIGNED FOR NAVY FOR DD692 CLASS DEST|

HOUSE 8316.

Since Westinghouse and G.E. built them for the same cla able.

DIMENSIONS: OAL 10' 10'/a "—OAW 4'101/2"—OAH 5'!

TOTAL WEIGHT: 14,855 lbs. 2" steam inlet—17" Round exhaust-

UNIT DIMENSIONS OAL 16' 3%"- -20Vi" bolt circle. -OAW 6'6"—OAF

JMf^lmap LOW-PRESSURE

UNUSED 300 KW G.E. 120 240 VOLT DC

TURBO-GENERATOR SET

GENERATOR: 300 KW—120/240 VDC—1250 amps— 1200 RPM. REDUCTION GEAR: 8.344:1 — 10012/ 1200 RPM—type S-182. TURBINE: DOR418N—449

H.P.—10012 RPM—working pressure 180/220 PSIG.