Page 52: of Maritime Reporter Magazine (October 15, 1977)

•^inri I HAS THIS EQUIPMENT HUtLL AVAILABLE NOW! 4 only—2700 H.P. MOTORS 1 only-3 Drum CLYDE HOIST 415 volts D.C.—280 RPM, Totally Enclosed

MOTOR VENT BLOWER VENT BLOWER ,-AIR COOLER v ENCLOSURE |

AIR COOLER

COUPLING

FLANGE

RESISTANCE

THERMOMETER

BULB FOR AIR

FROM MOTOR

SLEEVE

BEARING

HOUSING

MAIN

TERMINALS THRUST BEARING

HOUSING

These DOUBLE ARMATURE SUBMARINE MOTORS would be excellent for: Drill Ships/Platform,

Dredge Pump Drives or Mine Hoist Motors. 2 — Motors have been A-1 Reconditioned by a manu- facturers shop and carry A.B.S. Certification. 2 — Motors are used and will be removed from a

Submarine in the very near future.

Model 10 with Swinger

ADDED FEATURES

POWER: G.M. 8V-71 Diesel with 3 Stage Torque

Converter 11.500 series and Air Compressor.

OP. CONTROLS: All Air. Air Paul and Air

Friction Brakes with Controls console mounted at operators stand.

CLUTCH: Internal expanding band friction, two shoes, 50" dia. and 6" wide.

BRAKES: External contacting, single band, two piece construction, 57" dia. and 7" wide.

BEARINGS: Drums are taper roller bearing mounted. All shafts turn in Anti-friction bearings.

SWINGER: Two drum attached type with slack take up.

This Unit is in EXCELLENT CONDITION —

Ready to work NOW—THE PRICE IS RIGHT!

Less than 1,000 Hours operating time on Unit — Ready to work NOW!

HOIST SPECIFICATION

MODEL: Frame 10—3 drum with 2 drum swinger.

LINE PULL: 30,000 Lbs.

DRUM SIZE: Dia. 25"—Igth. 36"—Figs. 57"

DRUM CAP.: 4170 Ft. of 1 '/a " 3500 Ft. of 1 '/4 "

RATING: 37,500 lbs. S.L.P. at 150 FPM—

Sec. on larger wire rope.

Available for Inspection and at our plant located in

Portland, Oregon 2—SHIP DISCHARGERS • PORTABLE —Bulk Cargo • BUHLER—Type SKT-11" 4 only-2500 C. F. M., 125 P.S.I.

AIR COMPRESSORS

TWO (2) IN STOCK

Ready to go...

Complete with 440 volt, 3 phase. 60 cycle power panel, Control

Stands and approx. 100 ft, of Power Cable with

Crouse Hinds Connectors. • Reasonably Priced • Ready to work NOW!

CONTROL

PANEL • Immediate

Shipment 1 — Only 54 ft. long approx. 14,000 lbs. 1 — Only 4011. long (with spare 10 ft. of Tubing & Chain) — Approx. 13,300 lbs.

Each with 75 HP, TEFC Motor, 220/440 volts, 3 phase, 60 cycle and Twin Disc Fluid Coupling and Gear Reducer.

Model: 14.5HCMR-16.

CAPACITY: Up to 150 Tons of Wheat per hour (prox. Max. Material Size 2" to 3").

Will Handle — Grain, Soy Beans, Phosphate, Nitrate,

Potash, Kaolin, China Clay, Fertilizer, Alfalfa Pellets and other similar bulk materials.

CONDITION

USED-EXCELLENT and priced to move

NOW! •

WRITE FOR

FREE BROCHURE

Solve your air problems with these units and save!

Manufactured by Clark—Model CMA. Horizontal

Opposed Cylinder Design. Powered by 500 H.P.

Synch. Motor, 2400/4160 volts, 3 Phase, 60 Cycle, 600 RPM. and includes Starter.

Equipped with Self Contained, Closed Water

System, Radiator Cooled, 1 _ UNIT IS COMPLETELY OVERHAULED 1 — UNIT, USED —AS IS 2 — UNITS ARE INSTALLED IN A

RAILWAY CAR. 2 — Railway Cars are available for these units, if so desired.

These Compressors are skid mounted, packaged units. They were originally installed in railway cars as Emergency Air Supply on the West Coast by the

Navy Bureau of Yards and Docks.

Ideal for Shipyard or other large volume air consumers.

For additional information and

Quotation, Please Contact:

Hugh Sturdivant

Sales Manager, Marine & Industrial Sales Div.

Phone: 503/228-8691

Telex: 36-0503 • Cable: "ZIDELL"

Marine and Industrial Sales Division of ZIDELL

EXPLORATIONS, INC. 3121 S.W. Moody

Portland, Oregon 97201