Page 4th Cover: of Maritime Reporter Magazine (September 15, 1978)

Technical Report On

Mooring For LNG Ships

Released By MarAd

The Maritime Administration has released a technical report on the feasibility of a new Single

Point Mooring (SPM) concept de- signed for ships carrying liquefied natural gas (LNG) and other low- temperature cargoes.

The study was carried out by

Donaldson Associates, Rancho

Palos Verdes, Calif., under con- tract to the Maritime Adminis- tration. Additional funding and technical support were provided by Pacific Marine Associates, a jointly held subsidiary of Pacific

Lighting Corporation and Pacific

Gas & Electric Company.

The cryogenic SPM provides an unmanned, remote tanker moor- ing and transfer conduct which is operable in an unusually wide range of weather conditions. It does not have liquefaction, stor- age, or vaporization capability and is, therefore, used in conjunction with an onshore or offshore stor- age facility.

The study concentrated on five key areas: (1) motion character- istics of the cargo transfer buoy; (2) design of the marine hose as- sembly; (3) design of a coaxial

LNG/vapor swivel in the top of the buoy; (4) a self-sealing dis- connect, and (5) pressure drop and thermal analysis for a tri- axial pipeline concept.

Positive results were obtained for each of the key areas investi- gated. The report concludes that subsequent technical effort can follow the normal design path for new marine systems, namely, test verification of the analytical results obtained.

The final report is available from the National Technical In- formation Service, 5285 Port Roy- al Road, Springfield, Va. 22161, for $5.50. The order number is

PB-283474/AS.

New Diesel/Electric

Supply Boats Featured

In Halter Brochure

An eight-page brochure, re- plete with color photos and de- scriptions of the many types of vessels built by Halter Marine,

Inc., features a new type of HAL-

MAR tug/supply vessel using diesel/electric propulsion.

Halter Marine, Inc. is the world's largest builder of supply vessels for the offshore oil in- dustry. The company owns and operates 10 shipyards in the

Southeastern United States, and builds a wide variety of vessels, including crewboats, tugs, utility boats, fishing vessels, and oceano- graphic research vessels.

For a copy of the brochure, titled "HALMAR Supply Utility

Vessels," write to A.J. Rizzo, Hal- ter Marine, Inc., 10001 Lake For- est Boulevard, New Orleans, La. 70127.

Port Electric Named

Marine Distributor By

Jeamar Winches Ltd.

Hank Barnes, sales manager,

Port Electric Supply Corporation, has announced the appointment of

Port Electric by Jeamar Winches

Ltd., 53 Maple Avenue, Thornhill,

Ontario, Canada L3T 3S8, as the exclusive distributor of their whole range of winches for the states of New York and New

Jersey, and the cities of Phila- delphia, Pa., and Baltimore, Md.

Jeamar Winches are one of the world's leading manufacturers of winches, producing a complete range of machines, including hand winches, electric winches, engine- powered winches and hydraulic winches.

Port Electric has been estab- lished for many years and are well-known for their technical ex- pertise in both the marine and industrial fields.

This new association will be of great benefit to the existing cli- ents of both Jeamar Winches and

Port Electric, and will greatly en- hance the service to winch users generally.

Port Electric Supply Corp. is located at 157 Perry Street, New

York, N.Y. 10014.

MAULThe first vessel in the U.S. to apply the most unique bottom coating in the world/

SPC

EM jfll \ V ij

Ihi / t x -tflf \ 1 fifoS

MAUI: dark area-Cathodic Protection Dielectric shield; green - first coat of SPC; blue - second coat of SPC.

MAUI: ready for sea with 4 coats of SPC.

Matson's new 720', 38,700 ton maximum displacement container vessel, MAUI, has been coated with SPC self-polishing copolymer by Maryland Shipbuilding and Drydock. Built by

Bath Iron Works, MAUI went through fitting out period with only an anti-corrosive coating below the waterline. Prior to receiving 4 coats of SPC the only surface preparation required was a high pressure water wash.

SPC self-polishing copolymer antifouling bottom paint is a revolutionary coating patented by International Paint Company. The unique chemical combination of biocide and vehicle allows the water turbulence to polish SPC's surface as the ship passes through the water.

Not only does the hull remain clean but the progressive smoothing of the underwater hull results in significant operational savings.

You too can expect to save at least 12% in fuel costs if you coat your vessels with SPC. You will also require fewer drydockings because the life of SPC is directly proportional to its thickness. Recoating with SPC is simpler than with conventional antifouling systems. A high pressure water wash, touch up of physically damaged areas with anti-corrosive, and the surface is ready for enough additional coats of SPC to last until next planned drydocking two, three or even four years away.

Contact your nearest International Marine Coatings representative and challenge him to show how much SPC can save for you.

International Marine Coatings

International Paint Company, Inc.

Executive Sales Office: 17 Battery Place North, New York, NY 10004 c/o W. Norman Duncan, Vice President-General Sales Manager 3915 Louisa Street, P.O. Box 26069, New Orleans, LA 70186 c/o F. Brickk Hurst, Vice President, Southern District & Offshore 220 South Linden Avenue, South San Francisco, CA 94080 c/o Grant Johnson, Executive Vice President

Selt-Polithing Copolymer A/F

SAVES FUEL 22 Maritime Reporter/Engineering News