Page 32: of Maritime Reporter Magazine (March 15, 1980)
Read this page in Pdf, Flash or Html5 edition of March 15, 1980 Maritime Reporter Magazine
Zapata's new "Canada-class" jackup rig, to be built by Promet (Pte.) Ltd. of Singapore, was designed by Baker Marine Cor- poration of Ingleside, Texas. Dimensions of the severe environment jackup, which will work initially for Mobil Oil of Canada under a three-year contract, are: (hull) length, 230 feet; width, 212 feet; depth. 27 feet. The $42-million rig will be equipped with adequate leg length to permit seasonal drilling in water depths to 200 feet.
Zapata Orders Three Rigs Costing $105 Million
Zapata Corporation, Houston,
Texas, announced recently that it has signed contracts for the con- struction of three new jackup rigs for its offshore drilling fleet in two Singapore shipyards. The company said the U.S.-flag rigs will be owned and operated by
Zapata Off-Shore Company, are scheduled for 1981 delivery, and will have an estimated total cost of $105 million.
The company said that one of the jackups is being built for op- eration in severe environments, and will work initially for Mobil
Oil of Canada under a three-year contract to drill in a new explora- tion area about 100 miles east of
Nova Scotia. Zapata called the $42-million rig "one of the world's largest jackups in terms of stor- age capacity and structural strength."
The company said the other two jackups will be moderate environ- ment rigs suitable for work in
Southeast Asia, the Middle East, the Gulf of Mexico and most other active exploration areas. They will cost approximately $31 million each.
R.C. Lassiter, Zapata Corpora- tion president and chief operating officer, said construction of the three jackups is part of a plan to upgrade and extend the compa- ny's offshore drilling fleet to meet increasing long-term demand. He explained that all three units are of a three-legged, cantilever con- figuration which enables them to drill both exploration and devel- opment wells, extending by sev- eral years the usefulness of a rig in a successful exploration area.
Mr. Lassiter said that in view of their size and versatility, and pro- jected markets for that class of rig, the company does not antici- pate any problems finding work for the two smaller jackups, which have not yet been contracted. ta
L 1..
Two of the three new jackups to be built by Far East-Levingston Shipbuilding, Ltd.,
Singapore, for Zapata Corporation are based on the Friede & Goldman L-780 design. The two units will have hull di- mensions of 180 feet by 175 feet by 25 feet, with overall leg length of approxi- mately 340 feet. These $31-million units will have living quarters for 84 men, and will be suitable for operation in water depths of 250 feet.
Zapata said the specifications and design of the "Canada-class" jackup, developed by Raker Ma- rine Corporation of Ingleside,
Texas, for construction by Promet (Pte.) Ltd., Singapore, include the ability to withstand strong currents and 81-foot seas at a 150- foot water depth. The rig's var- iable deckload capacity will be 2,500 tons, and installed leg length will permit seasonal drilling in water depths to 200 feet. Leg length can be added later for drill- ing in deeper water in less severe environments.
The company said the other two jackup units, to be built by Far
East - Levingston Shipbuilding,
Ltd., will be equipped to drill in water depths to 250 feet. The rigs were designed by Friede & Gold- man, New Orleans, La. All three rigs will be built to conform to regulations of the American Bu- reau of Shipping and the U.S.
Coast Guard.
Jotun Baltimore Offers
Literature On Baltoflake
Coating System
Jotun B.C.P. recently published literature on their Baltoflake coat- ing system.
A solvent free fine particle flake glass reinforced polyester coating,
Baltoflake provides abrasion and corrosion protection with mini- mum maintenance. The one-coat application system requires no more pretreatment than multi- coat systems for maintenance.
For a copy of the Baltoflake brochure, complete with specifi- cations performance capabilities and applications, write Nicholas
J. Scotland, Jotun-B.C.P., 501 Key
Highway, Baltimore, Md. 21230.
Navidyne Receives
Orders For Satellite
Navigation Systems
Olympic Maritime S.A. (Onas- sis Group), and Sea-Land Service,
Inc. have chosen the Navidyne
ESZ-4000 Satellite Navigator for their merchant fleets. Sea-Land has purchased 27 Navidyne sets, and Olympic has ordered 22, with an option to buy as many as 18 more, according to A. Clifford
Barker, president of Navidyne
Corporation.
Olympic Maritime purchased the Navidyne satellite navigators through Anschuetz of America,
New York. The first sets were in- stalled aboard Olympic vessels in
September. Installation of the ini- tial 22 units will be completed by the end of this year.
Sea-Land is installing the ESZ- 4000 aboard all ships in its fleet of SL-7s and SL-18s. As the new
D-9s go into service next year, they will also be fitted with the
Navidyne unit.
For literature and full informa- tion on Navidyne satellite navi- gation receivers, write to A. Clif- ford Barker, Navidyne Corp., 11824 Fishing Point Drive, New- port News, Va. 23606.
Perry Oceanographies, Inc.
Offers Services And
Products Brochures
Perry Oceanographies, Inc. has recently published a series of single-page brochures describing engineering services and products offered by the firm.
Perry has long been recognized as a leader in the design and fab- rication of submersibles and dive systems. Perry is now offering shipyard support services, includ- ing interface engineering to incor- porate submersibles or dive sys- tems onto surface support ships; general naval architectural and marine engineering calculations; and contract plan and specifica- tion preparation.
The product brochures describe available engineering services and provide specifications on submers- ibles, dive systems, remote con- trol vehicles, manipulator arms, and thrusters.
For free copies of these bro- chures, write Mrs. Rita Pellen,
Perry Oceanographies, Inc., P.O.
Box'10297, Riviera Beach, Fla. 33404. 38 ZIDELL I Maritime Reporter/Engineering News