Page 37: of Maritime Reporter Magazine (December 15, 1981)

MARINE DIESEL SPECIALISTS

Can we help you select the most fuel efficient engine for your Marine Requirements? We can offer:

Allis-Chalmers from 32 to 450 BHP, new/ MWM from 428 BHP to 8,000 BHP, new

Mitsubishi UEC from 3,000 BHP to 9,000 BHP, new/ EMD engines from 1300 BHP to 3600 BHP, remanufactured

Schnitzer-Levin Marine Company

San Francisco (415) 761-0993

TWX 910-371-7248 445 Littlefield Avenue (Box 2445)

South San Francisco, CA 94080

New York (212) 832-3320 Portland (503) 224-9900

OFFERS FOR LIFERAFTS

OFFERS:

Plainly marked on the envelope "Offer on P.T. #170" will be received by the undersigned on an individual, combined lot or complete lot basis up to 2:00 p.m., Pacific Standard Time, January 29, 1982, for the following forty-three (43) liferafts located "as is and where is" at the British Columbia Ferry

Corporation Liferaft Service Centre, 12800 Rice Mill

Road, Richmond, British Columbia, Canada:

Canister type DSL rubber liferafts, 25mm, 25-person

Manufactured by Deutsche Schlauchbooffabrich,

Hans Scheibert, Germany

Solas — 1960

Cylinder weight: 10.0kg

Tare weight: 42.18 lb.

Full weight: 56.35 lb.

Nitrogen: .75

Carbon Dioxide: 13.42 lb.

Packs—B (canisters are designed for "A" pack)

Note: These rafts were manufactured in 1968 and 1969. They were last serviced in 1975 and 1976. They are not approved for use in Ca- nadian waters.

To view or for further information contact Mr. R.J.

Burke or Mr. J. Thompson at the above address, telephone (604) 277-3121 or telex 043-55606.

Offers must be accompanied by a certified cheque in Canadian currency made payable to the British

Columbia government Minister of Finance for the full amount of the bid. If the successful bidder subse- quently withdraws his offer, the payment shall be liable to forfeiture.

The highest or any offer will not necessarily be ac- cepted, but the bearer of the successful bid will be required to pay the 6% B.C. Social Sen/ices Tax, if applicable.

A.W. Charlton, CHAIRMAN

Purchasing Commission

Parliament Buildings

Victoria, British Columbia V8V 1T8

CANADA

Telex: 0497135

A.C. CAPSTAN 10,000 LBS @ 40 FPM

Totally enclosed 10 HP 440/3/60 1750 RPM motor.

Barrell working area: top 11 Vi" diameter — bottom 13" diameter — over a 9" span. Deck space required 36" X 41". Total height 34".

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202

Marine Warehouse (301) 752-1077

TWX: 710-234-1637

LARGE STOCKS

ANCHORS--CHAINCABLES

WINCHES -- WINDLASSES -- DECKCRANES

GENERATORS -- ACCOMMODATION LADDERS

CAPSTANS -- LIFEBOATS - GANGWAYS - PUMPS

CHOCKS -- FAIRLEADS -- ETC.

WILL EM POT B. V. 45 Stationsplein—Rotterdam

Tel: 011-31-10-11 98 70 Telex: 22496 (wbpot) 2-SPEED A.C.

MOTOR-DRIVEN CAPSTAN 8500 lbs @ 90 FPM or 4250 lbs @ 180 FPM. Barrel size 15". Below-deck mounted motor — 31 HP — 440/3/60 - 42/38 amps - 820/1640 RPM. Squirrel cage — totally enclosed — watertight. Half hour duty 65 °C. temp. rise. Base OAL 6'4". With magnetic brake, 2-speed control and master switch.

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202

Marine Warehouse (301) 752-1077

TWX: 710-234-1637

NEW - UNUSED

SUMP OR LOW PRESSURE

DRAIN PUMPS

Bronze — 40 GPM @ 40PSI. 2" Discharge — single impeller — CW rotation — 32" from deck plate to base. Complete with flotation equipment. Totally en- closed 5HP 440/3/60 1725 RPM motor. Repair parts for motor & pump included.

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202

Marine Warehouse (301) 752-1077

TWX: 710-234-1637

HYDRAULICS

SERVICE • REPAIR • PARTS

CONSULTING • DESIGN

CUNNINGHAM MARINE

HYDRAULICS CO., INC. 201 Harrison St. • Hoboken, N.J. 07030 (201) 792-0500 (212) 267-0328 2030 E. Adams St. •Jacksonville, FL 32202 (904) 354-0840

TWX 710-730-5224 CMH Hoboken, NJ

CROUSE HINDS 1000 WATT

FLOODLIGHTS

IN STOCK

NEW-UNUSED

HEAVY DUTY CAST ALUMINUM marine floodlights—series 48116—

ADE 16. U.L. Marine listing 595— also USCG accepted. Mogul base —will handle 1000 watt incandes- cent or clear metal Halide bulb.

Corrosion-resistant—hinged door.

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202

Marine Warehouse (301) 752-1077

TWX: 710-234-1637

NEW U.S. MARAD-TYPE

AXIAL FLOW FANS (3) 10,500 CFM Model AF-100, "Baldor" 5 HP motor — 440/3/60 — 40° — 1750 RPM - 7 amps. (1) Same as above, but 2-speed 1750/750 RPM —

Frame 184TCZ (2) 12,880 CFM — Size 15AF — Baldor Motor — 7.5/ 1.9 HP - 440/3/60 10/3.5 amps - 1750/880 RPM - 40 °C — Frame 215TCZ 20,000 CFM - 1.9" SP - Size 200AF - 10 HP - 440/3/60 — 1750/880 RPM (2) 40,665 CFM — size 43AF — 60 HP Baldor Motor — 440/3/60 — 1760 RPM — 75 amps — 50° rise — Frame 364TZ Ins. F (1) 6000 CFM — AF40 - Baldor Motor — 3 HP - 440/3/60 — 1750 RPM — Ins. F — 40 °C — Frame 182TCZ (3) 2000 CFM - size 20AF - .75 HP - 440/3/60 - 3450 RPM 1.3 amps — Ins. F — 40 °C — Frame 560Z.

THE BOSTON METALS COMPANY 313 E. Baltimore St. Baltimore, Md. 21202

Marine Warehouse (301) 752-1077

TWX: 710-234-1637

December 15, 1981 47