Page 25: of Maritime Reporter Magazine (November 1983)

Partial list of PRC marine products

Product Description Product Description

Deck

Coating

Proreco®I

Interior Deck

Coating System

Proreco® III

Weather Deck

Coating System

Impact and abrasion resistant elastomeric coating Fire retardant Has electrical insulation properties Decorative color chips and non-slip types available.

Impact and abrasion resistant, elastomeric non- skid coating for use over primed wood, steel or aluminum decks.

Polyurethane.

Both deck coating systems include corrosion resistant primer, base coat non-skid or decorated topcoats.

Military Approval:

U S. Navy Technical Manual.

Chapter 634. Deck

Coverings

Caulking Proreco® Marine

Rubber Calk™

PR-365-H

Rubber Calk" 3095 Sealant

PR-7091

A complete all purpose marine caulk, for use above and below the water line.

One-part polysulfide

One-part, used when fast cure, structural strength and adhesive bonding is required

Polyurethane

Two-part self-leveling sealant, used as a caulking and bedding compound

Polyurethane

MIL-S-24340.

One-part bedding compound

Putties, PR-615-HF

Tapes,

Adhesives

PR-945

PR-380-M

Chrome-Lock1

Type N Felt

Tape

One-part, fire retardant. moldable. damming compound Nonsag. soft, workable noncuring putty.

MIL-I-3064A

Two-part, elastomeric. chemically curing adhesive with excellent adhesion to properly prepared metal plastics wood and ceramic surfaces

Epoxy

Two-part, fuel resistant adhesive, with high cohesive and tensile strength

Resistant to fuel, oil and weather

Polysulfide

Anti-corrosion, anti- electrolysis impregnated wool felt for tape and cut gasket uses in flanges and tape joints.

MIL-G-20241C

PRC ", 'Chrome-Lock'' and "Proreco" are trademarks of Products

Research & Chemical Corporation registered with the U.S.

Patent Office. "Rubber Calk" is a trademark of Products Research & Chemical Corporation

Protective PR-475-S

Coatings

PR-1539-US

PR-1120

PR-1005-L

PR-1436-G

Sprayable

Sprayable. abrasion resistant coating for the protection of insulating materials such as foam, fiberglass

Polyurethane.

Sprayable. fire-retardant. abrasion resistant coating

Polyurethane

Two-part, anti-corrosion all purpose coating for fuel, ballast and CHT tanks.

Polyurethane.

MIL-P-23236.

One-part, highly flexible synthetic rubber, used as protective tank coating for metals, and synthetic rubber sealants

MIL-S-43838 (2)

Two-part, corrosion inhibitive. fuel resistant coating

Polysulfide.

MIL-S-81 733

Electrical

Insulating

PR-1201 -Q

PR-1568

PR-1547

PR-1539-U

Two-part, general purpose flexible potting and molding compound for electrical connectors. Elastomeric, fuel resistant

Polysulfide.

MIL-S-8516E (2)

One-part, thin film, moisture and heat resistant coating for electrical circuit board applications.

MIL-I-46058C (2)

Two-part, high performance, high temperature resistant compound for potting, molding and encapsulating.

Polyurethane.

MIL-M-24041.

Abrasion resistant insulating deck covering for use in electronic and electrical areas.

This is only a partial listing of the many superior PRC products available. Detailed information on these and other PRC products is available on PRC Technical Data Sheets.

Write or call Rodney N. Morris, Marine Market Manager.

Products Research & Chemical Corporation 5430 San Fernando Road. P.O. Box 1800

Glendale. CA 91209 (213) 240-2060

November 1, 1983 Write 605 on Reader Service Card 13