Page 49: of Maritime Reporter Magazine (August 1984)

Read this page in Pdf, Flash or Html5 edition of August 1984 Maritime Reporter Magazine

The two Dillingham barges being towed to Alaska by tug Richard Foss.

Dillingham Delivers Massive Bridge

Construction Materials To Alaska

By Tandem Barge Tow

Dillingham Maritime Services,

Seattle, Wash., recently delivered all the materials, except for poured- in-place concrete, for seven sepa- rate highway bridges at four dif- ferent construction sites in An- chorage, Alaska. The 6,000 ton cargo was carried from Seattle via water on a tandem tow of two barges, which also included spe- cially-equipped tractors and dol- lies used to off-load the material in Alaska. "The tandem barge demon- strated the efficiencies that are possible when delivering very large, very bulky cargo," said Blain Eliot,

Dillingham's Pacific Northwest manager.

The cargo included 56 concrete beams, each weighing between 63 and 88.5 tons and measuring up to 137 feet 8 inches in length; 12 massive steel truss bands, weigh- ing between 72.5 and 132 tons apiece; 141 tons of steel rebar; three tractors and heavy-lift dol- lies; miscellaneous building mate- rials and a Manitowoc 4100 crane.

The two Dillingham 286 Class barges, each measuring 286 feet long with a carrying capacity of 7,000 dwt, were towed to Alaska by the 3,000-horsepower oceango- ing tug Richard Foss. After arriv- ing in Anchorage, the cargo was transported six miles to its desti- nation by the V. Van Dyke trac- tors and dollies. "It was necessary to bring the specially equipped tractor and heavy-lift dollies to Alaska, be- cause they are ideal for transport- ing the long and heavy beams to the construction site," said Mr.

Eliot. The tow, for the Swalling

Construction Co., Inc., of Anchor- age, brought materials for the

Minnesota Drive Extension project.

Dillingham Maritime Services is a Dillingham Maritime Company.

Other Dillingham Maritime com- panies include Foss Launch & Tug

Co. and Foss Alaska Line, both based in Seattle; Ocean Transpor- tation Services, Inc., Houston,

Texas; Pacific Towboat, Long

Beach, Calif.; Dillingham Tug and

Barge and Young Brothers Lim- ited, headquartered in Honolulu.

Guam Line To Construct

Two Containerships

Guam Line, Inc., has signed a letter of intent with Osaka Inter- national Shipping Co., Ltd. to con- struct two containerships.

These vessels of about 7,900-dwt will carry 201 FEUS at a service speed of 16 knots. Of the 201 con- tainers 45 will be refrigerated.

Both ships will be U.S.-flag, built under ABS class and in complete compliance with U.S. Coast Guard requirements.

MAKE

A POWERFUL

INVESTMENT

IN PROFITABILITY

The TAMD121 C, a turbo charged in-line six fitted with aftercooler.

Ask commercial operators who use a Volvo Diesel work engine how they rate it for steady reliable operation, operating economy and easy maintenance.

They'll relate to the engineering fine points that \folvo pioneered in diesel technology, by talking about extended range and lower fuel bills. And while low fuel consumption is a major engine consideration, you'll probably hear more about the fact that a Volvo Diesel is designed and manufactured as a marine work engine.

Engineering detail becomes evident when you size up the com- pact in-line six cylinder Volvo Diesel. Advanced metallurgy and pre- cise engineering have been combined to help produce a diesel with low noise and vibration levels.

Installation costs can be kept down since a Volvo Diesei comes off the production line as a marine work engine, ready to go into a boat.

The uncomplicated engine design and a generous number of power take offs allow you to fit extra equipment (compressors, bilge pumps, hydraulic pumps, etc.) easier.

Easy maintenance features can help you lower your operating costs. Since the Volvo Diesel was built as a marine diesel, you'll find easy accessibility for cleaning, repair or replacement. And ifyou're in need of parts or service you have a well developed network of Volvo representatives, independent distributors and dealers in North Amer- ica and 120 other countries backing you up.

Take stock in what operators who power with a Volvo Diesel say.

Specify a Volvo Diesel when you build or repower. "These results are obtained under laboratory

Specific tuel and ideal conditions. Not necessarily obtain-

Continuous flywheel power consumption" able under normal use. at 270 kW, 1800 r/min Fuel consumption may vary according to hull type, weight, speed, prop application, sea kW hp r/min g/kWh Ib/hph conditions, type ot operation and maintenance 270 367 1800 217 .352 Note! Illustrated engine fitted with optional equipment.

Marine work engines in a power range from 65 to 408 hp.

U S Distributors are located in California Connecticut, Florida. Hawaii and the state of Washington

Canadian Distributors are located in British Columbid. Newfoundlond. Nova Scotia, and Ontdno

If you need information, specifications or assistance for a Volvo

Diesel contact:

Commercial Marine Manager, Volvo Penta of America, P. O. Box 927,

Rockleigh, NJ 07647. (201) 767-4837

VOLVO

IN THE SPIRIT OF PERFECTION

Volvo Penta ot America, The Marine Division of Volvo of America Corporation, Rockleigh, New Jersey 07647 (©1984

Visit us at the Inland Waterways Show — Booth 604

August 1,1984 Circle 105 on Reader Service Card 51

Maritime Reporter

First published in 1881 Maritime Reporter is the world's largest audited circulation publication serving the global maritime industry.