Page 36: of Maritime Reporter Magazine (October 1984)

Read this page in Pdf, Flash or Html5 edition of October 1984 Maritime Reporter Magazine

Deck Machinery (Hagglunds—continued) course very attractive in deck cranes. A major commitment to hy- draulic deck cranes is one of the fea- tures of the current U.S. Navy pro- gram to strengthen the Rapid De- ployment Force (RDF) of the Mili- tary Sealift Command. Hagglund hydraulic cranes are being installed on all 21 of the sophisticated RO/

RO-LO/LO vessels in the RDF pro- gram—a total of 99 units.

The RDF program comprises 13

Maritime Prepositioning Ships (MPS) and eight Fast Logistic Ships (T-AKR), the latter being the 33- knot SL-7 containerships purchased by the Navy from Sea-Land in 1982 and being converted by Avondale

Shipyards, National Steel and Ship- building, and Pennsylvania Ship- building. Four of the eight former

SL-7s have already been delivered to the Navy. Each of the T-AKRs have one twin 35-ton crane and one twin 50-ton crane.

Of the Maritime Prepositioning

Ships, the five being converted by

Bethlehem Steel for Maersk Line THE NORWEGIAN MARINE ENGINE

Designed to give

OPERATIONAL EFFICIENCY in a demanding international market

HEAVY FUELS? - ASK OUR ADVICE 1. Over 20 years experience 2. More than 500 250 mm bore engines in world wide service 3. Burning fuels upto 700 cSt efficiently

WE WELCOME YOUR INQUIRIES

FOR INFORMATION PLEASE CONTACT:

BERGEN DIESEL INC.

Suite 203, 21 10 1-10 Service Road, Kenner, LA 70065 U.S.A.

Telephone: (504) 443 3004/3005 - Telex: 78 49 80 - Telefax: (504) 443 3051

REPRESENTING A S BERGENS MEKANISKE VERKSTEDER will each have one twin 36-ton crane and two twin 30-ton cranes, the three being converted by NASSCO for Waterman Line will have one twin 50-ton crane and one twin 35- ton crane per ship, and the five new buildings for General Dynamics un- der construction at its Quincy yard will each have two twin 39-ton cranes and one single 39-ton crane.

These Hagglund cranes will be capable of combination operation to handle loads up to 100 tons under a single coordinated control. The re- quirement to be able to work cargo safely under open-sea conditions was a special feature of these con- tracts. Deliveries of these cranes are reported to be proceeding to the full satisfaction of the shipyards in- volved.

For additional information,

Circle 26 on Reader Service Card

HIAB

HIAB Cranes & Loaders, Inc. of

York Pa., offers five models of its well-known hydraulic deck cranes.

Features and capabilities of

HIAB Sea Cranes include ease of operation, light weight, maneuver- ability, load control and precision placement, compactness, low oper- ating height, horizontal outreach and load carrying capacity, and cor- rosion resistant construction.

Trim and compact in design, they do not require guide ropes, cables or hand-operated winches to handle.

They take up little space and can be mounted anywhere on a boat deck.

HIAB cranes are easily operated by one man using positive, direct hy- draulic controls. The crane's move- ments are fast and smooth due to the high-pressure hydraulic system.

On smaller boats, the lightweight feature permits a bigger cargo pay- load. The cranes have a flexible elbow between the main boom and outer boom, and a telescoping ex- tension boom. (The cranes rotate up to 410 degrees on some models.)

These features provide exceptional maneuverability and the capability for lifting heavy loads close in or at maximum horizontal reaches. Outer booms provide a firm, rigid support for the cargo hook. In conjunction with the flexible elbow, this pro- vides steady load control and the ability to precisely spot the load.

The cranes fold down into a com- pact configuration with a low center of gravity that will not affect vessel stability and provides more cargo space on the deck.

HIAB hydraulic cranes are specif- ically manufactured for maritime use. Protection against sea and salt corrosion is ensured by the exten- sive use of galvanized components, waterproof fittings, nickel chrome- plated boom cylinders, and special marine coatings.

For further information,

Circle 27 on Reader Service Card

HYDE PRODUCTS

Hyde Products, Inc. is a leading supplier of ship deck machinery and steering gears, serving the marine industry since 1865. Originally founded as the Hyde Windlass

Company in Bath, Maine, today the <- Circle 212 on Reader Service Card

P. O. Box 858, N-5001 Bergen, Norway - Telephone: (47 5) 19 00 00

Telex: 42 735 bmvh-n - Telefax: (47 5) 19 00 00 ext. 291 (day), (47 5) 19 04 05 >night)

Maritime Reporter

First published in 1881 Maritime Reporter is the world's largest audited circulation publication serving the global maritime industry.