Page 8: of Maritime Reporter Magazine (May 15, 1985)
Read this page in Pdf, Flash or Html5 edition of May 15, 1985 Maritime Reporter Magazine
Korobov Elected Vice
President-Finance For
COMSAT TeleSystems—
Mutnick Named Controller
COMSAT TeleSystems has an- nounced that Alan G. Korobov has been elected vice president for finance, and Myles Mutnick has been promoted to the newly created position of controller. Mr. Koro- bov will oversee all of TeleSystems' financial and MIS activities, and
Mr. Mutnick will direct the com- pany's financial reporting, account- ing, budgeting, and internal controls operations.
Prior to joining TeleSystems, Mr.
Korobov held various managerial positions within COMSAT Tech- nology Products, COMSAT Gener- al, and COMSAT corporate offices.
He most recently served as vice president-finance for COMSAT
Technology. He has also held posi- tions with TRT Telecommunica- tions, DeHart and Broide, and Riggs
National Bank.
Mr. Mutnick previously served as director of accounting for Tele-
Systems. Prior to that he held a number of positions with Solarex,
Arthur Anderson, and Deloitte Has- kins & Sells. He received his MBA degree from Rutgers Graduate
School in 1974, and became a CPA in 1976.
COMSAT TeleSystems, located in Fairfax, Va., designs, manufac- tures, markets, and provides world- wide service and support for a com- plete line of advanced analog and digital communications equipment and systems.
Bath Iron Awarded $4.5-Million Navy
Contract For Frigates
Bath Iron Works Corporation,
Bath, Maine, is being awarded a $4,500,000 cost-plus-fixed-fee con- tract under a basic ordering agree- ment for the post shakedown avail- ability of the guided missile frigates
USS Simpson (FFG-56), USS Sam- uel B. Roberts (FFG-58) and USS
Kauffman (FFG-59). Work will be performed in Bath, Maine, and is expected to be completed in Octo- ber 1987. Contract funds would have expired at the end of the cur- rent fiscal year. The Supervisor of
Shipbuilding, Conversion and Re- pair, Bath, Maine, is the contracting activity.
Kollmorgen Awarded $11.2-Million Contract
For Periscope Sets
Kollmorgen Corporation, Electro-
Optical Division, Northampton,
Mass., is being awarded an $11,200,000 firm-fixed-price con- tract for seven 18-B periscope sets for the Los Angeles class subma- rines SSN-753, SSN-754, SSN-755,
SSN-756, SSN-757, SSN-758, and
SSN-759, plus associated technical data and reports. Work will be per- formed in Northampton and is ex- pected to be completed in February 1987. Contract funds would not have expired at the end of the cur- rent fiscal year. The Naval Sea Sys- tems Command, Washington, D.C., is the contracting activity.
GE Awarded $3.3-Million
Modification To Contract
For Transducer Elements
General Electric Company, Syra- cuse, N.Y., is being awarded a $3,365,508 modification definitizing a previously awarded letter contract for TR203A/SQS-26BX transducer elements for surface ship sonars.
Work will be performed in Syracuse,
N.Y., and is expected to be com- pleted June 1, 1986. Contract funds would not have expired at the end of the current fiscal year. The Naval
Sea Systems Command, Washing- ton, D.C., is the contracting activity.
The suspension of General Electric
Company does not affect this con- tract since the modification repre- sents the definitization of a pre- viously awarded letter contract.
Burrard Yarrows Awarded $3-Million Contract
For Repair Of USNS Spica
Burrard Yarrows Corporation.
Vancouver, British Columbia, Can- ada, is being awarded a $3,019,526 firm-fixed-price job order under a master ship repair agreement for the post ship availability of USNS
Spica, a Military Sealift Command (MSC), United States-flag combat stores ship. The contract perfor- mance period is April 8, 1985, through June 15, 1985. Fourteen bids were solicited and six offers were received. Contract funds would not have expired at the end of the current fiscal year. The Military
Sealift Command, Washington,
D.C., is the contracting activity.
Tano Receives Additional
Coast Guard Contract
Valued At $2.7 Million
Tano Corporation of New Or- leans, a Rexnord company, has been awarded a $2.7-million contract ad- dition by the U.S. Coast Guard to manufacture electronic control sys- tems for five cutters. With this fol- low-on award for five shipsets, add- ed to a contract awarded in January this year for four other ship systems,
Tano's contracts in this Coast
Guard program now total $5.1 mil- lion.
The contracts call for the compa- ny to supply an engine room con- sole, pilothouse console, two bridge wing consoles, two local engine con- trol panels, and a variety of compo- nents and sensors for retrofitting in each of the 378-foot high-endurance cutters under the Coast Guard's
Fleet Revitalization and Moderniza- tion Program.
Tano will deliver the systems to designated shipyards starting in early 1986 through the fall of 1988.
CDI Marine Awarded $6.5-Million Navy Contract
For SLEP Design Services
CDI Marine Company, headquar- tered in Jacksonville, Fla., has been awarded a $6.5-million Navy con- tract to provide design and engi- neering services for the aircraft car- rier USS Kitty Hawk (CV-63) Ser- vice Life Extension Program (SLEP) at the Philadelphia Naval
Shipyard. The services will be pro- vided through the CDI Jacksonville office, which has supported previous aircraft carrier SLEP on the USS
Saratoga (CV-60), USS Forrestal (CV-59), and USS Independence (CV-62). Contracting activity is the
Naval Regional Contracting Center in Philadelphia.
General Crane Awarded $3-Million Navy Contract
For Two Portal Cranes
General Crane and Hoist Inc. of
Savannah, Ga., has been awarded a $3,166,000 firm-fixed-price Navy contract for two electro-mechanical portal cranes for the large auxiliary floating drydock AFDB-7, plus spare parts and associated engineer- ing services. Work will be performed in Savannah, and is expected to be completed in July 1986. Contract funds would not have expired at the end of the current fiscal year. Twen- ty-two bids were solicited and three offers were received. The Naval Sea
Systems Command, Washington,
D.C., is the contracting activity (N00024-85-C-4147).
Daewoo Wins $16.5-Million
Contract To Build Offshore
Vessel For India
The Oil and Natural Gas Com- mission of India has signed a con- tract for construction of a $16.5-mil- lion well-stimulation vessel by Dae- woo Shipbuilding and Heavy Ma- chinery Ltd. of South Korea.
The 26212 -foot ship will feature a dynamic positioning system, with two bow thrusters and two stern thrusters, the latter 360-degree ro- tatable, permitting it to remain sta- tionary during well-stimulation op- erations with or without use of mooring lines. The vessel will also incorporate an anti-pollution con- trol system, through which oil-dis- solving chemicals are spread on the surface of the sea to combat oil spills.
The ship will be used in offshore enhanced-recovery operations to help increase the volume of oil from older wells. Scheduled for delivery in 1986, it will be the first such ves- sel to be built at Daewoo's large and modern Okpo shipyard.
Jacksonville Yard Gets $3-Million Navy Contract
For Destroyer SRA Work
Jacksonville Shipyards Inc. of
Jacksonville, Fla., has been awarded a $3,092,000 firm-fixed-price Navy contract for the Selected Restricted
Availability (SRA) of the guided- missile destroyer USS Luce (DDG- 38). Work will be performed in May- port, Fla., and is expected to be completed by June 14 this year.
Two bids were solicited and two offers were received. The Supervisor of Shipbuilding, Conversion and
Repair, Mayport, Fla., is the con- tracting activity (N62670-70-C- 0018).
Exclusive Rep For
Danish Firm Introduces
Radiotelephone System
M.E.M.A.C.-Dantronics Boca Ra- ton, Fla., is the exclusive represen- tative organization for the Danish
Marine Communication A/S in the
U.S. and Canada.
The new and second generation
HF1200A radiotelephone system is said to be one of the most compre- hensive long range radio telephone systems to be launched in the North
American market in recent years. It has a new, completely redesigned transmitter (T-204A) solid state with 1,000-watt output. It is suitable for use on board large yachts, com- mercial vessels, offshore platforms, and is FCC type accepted. The
HF1200A meets CEPT specifica- tions, is MPT approved and com- plies with the latest SOLAS conven- tions, FCC, DOC and ITU radio rules.
The HF1200A is all solid state, has a fully synthesized transmitter and receiver, a built-in two tone alarm generator and electronic over- load protection. It operates on 110, 220 or 380 ac or 24 VDC and con- tains a built-in antenna dummy load. All the international marine
HF and MF bands are covered, there is a choice of exiter, the E204 which has 480 pre-programmed fre- quencies or the E205A which pro- vides coverage of each marine bank in 100 Hz steps.
Optional extras include a built-in battery charger, remote controlled antenna tuner, extended frequency coverage from 1.6 to 30 MHz, both
USB/LSB bands, and SITOR telex connections.
No warm-up period is required and it has low power consumption.
The system is well suited for point- to-point communications or for any oil platform communication instal- lation.
For further information on the
Danmar HF1200A systems,
Circle 22 on Reader Service Card 10 Maritime Reporter/Engineering News