Page 39: of Maritime Reporter Magazine (May 15, 1985)

HYDRAULICS

SERVICE • REPAIR • PARTS

CONSULTING • DESIGN

CUNNINGHAM MARINE

HYDRAULICS CO., INC. 201 Harrison St. • Hoboken, N.J. 07030 (201) 792-0500 (212) 267-0328 2030 E. Adams St.•Jacksonville, FL 32202 (904) 354-0840

TWX 710-730-5224 CMH Hoboken, NJ

WATERTIGHT DOORS

IN STOCK ifeti

SIZES 26"x48" 26"x66" 26"x60" 30"x60 5/16" Frame - 1/4" Panel

STEEL DOGS 6-Dog right and left hand hinged doors with frames. Constructed of Vi" steel plate and meet Coast Guard regulations for above deck as well as below deck use. All dogs are bronze bushed. Built to ABS.

NEW 7" RADIUS

PANAMA CHOCKS (MEET PANAMA REGULATIONS) 14" * 10" CLEAR OPENING

With extended legs for welding to deck. 14" wide on base length 28" height 27%" IMMEDIATE

DELIVERY FROM STOCK.

ALSO 12" x 10" IN STOCK

THE BOSTON METALS COMPANY 313 E. Baltimore SI. Baltimore, Md. 21202

Marine Warehouse (301)752-1077

TWX: 710-234-1637 -FOR SALE=

Surplus New Unused

DELAVAL

PROPULSION PARTS (1) Main H.P. Turbine Rotor - 11 stages (1) L.P. Turbine Rotor - 8 stages (1) Set 1st & 2nd Reduction Gears w/pinions.

Many repair parts for turbines, reduction gear, and turning gear.

BETHLEHEM PROPULSION PARTS (1) Complete Set of Blading for L.P. Turbine (1) Tail shaft, with liner and nut. Baltimore/Miami Class. AB 779.

PUMPS (1) Bingham 8x16-VTX 5 stage deep well (1) Worthington 2 DNE 72 Evaporator (2) Waterbury Steering Gear. Size 10A (1) Ingersol Rand 6 GTM (1) Ingersol Rand 12VCM complete

Jerry Hamlin

Grand Bassa Tankers, Inc.

Box 300—1812 CSB

Tulsa, OK 74102

Telephone: (918) 561-4841

Clemco Pipe Cleaning Tools

Blast-Clean Pipe Interior

Without Rotating The Pipe

Clemco Industries of Burlingame, Calif., is offering a family of internal pipe cleaning tools—Spin-Blast, Hollo-Blast, and Hollo-Blast

Junior—designed to blast clean the interior of pipe or tubing ranging in size from X-inch to 36-inch I.D., without rotating the pipe.

Used in conjunction with standard abrasive blast machines, pipe cleaning tools simply re- place conventional blast nozzles at the end of the hose. The Spin-Blast Tool incorporates a rotating head with two nozzles to propel abra- sive to the surface. 'The Hollo-Blast Tool utilizes a deflection tip to direct abrasive to the surface, and the Hollo-Blast Junior utilizes a deflection tip like the Hollo-Blast, but with smaller pro- portions to accommodate pipe with inner diame- ters of %-inch to 2 inches. Through this highly powered abrasive impact, precise surface pro- files can be obtained, which will ensure proper adhesion for long life coatings.

Various Tungsten Carbide nozzle sizes are available to comply with the range of pipe diam- eters. Internal pipe surface preparation is said to be easier, faster and more economical with the

Clemco Internal Pipe Cleaning Tools.

For more information on the Clemco Family of Internal Pipe Cleaning Tools,

Circle 59 on Reader Service Card

WINCHES—Steam or Air Operated

Stockle&s Anchors 3,000 lbs. through 27,500 lbs in stock,

FOB Jersey City

Large inventory of surplus chain and fittings

Supply of new chain, including ten shots of 2 5 16" and twenty shots of 2 5. 8" 9 x 12 American Hoist & Derrick Winches, reconditioned equal to new

Spare parts for all steam winches

STANDARD STEAM WINCH CO., INC.

Agents for The Crosby Group 191 Van Vorst St., Jersey City, N.J. 07032 201/433-6974

JON M. USS ASSOCIATES, INC. 411 BOREL AVENUE. SUITE 505 • POST OFFICE BOX 5554 • SAN MATEO. CALIFORNIA 94402-0554

NAVYSTANDARD

VANEAXIALFANS

Delivery

From

Stock

Reconditioning and Rewinding by Dahl Beck Electric. ^Available with Warranty.

W (415) 573-9191

V TELEX 17-2&55 GOJON SW

Hitachi Delivers Jackup Rig

Built For ONGC Of India

The cantilever type jackup drilling rig Sugar

Ratna, ordered by the Oil & Natural Gas Com- mission (ONGC) of India, was completed re- cently at the Osaka Works (Sakai) of Hitachi

Zosen Corporation. Immediately following de- livery, the rig left under tow for India, where it will begin drilling offshore Bombay.

The new unit is the 21st jackup drilling rig built by Hitachi Zosen, and the third built for

ONGC. The company's rig backlog includes four more jackups, five semisubmersibles, and one drillship.

Designed and built to American Bureau of

Shipping class, the Sugar Ratna's platform is 216.5 feet long, 200 feet wide, and 23 feet deep, with a draft of 13.6 feet. The rig's three legs are 420 feet long, permitting drilling in water depths up to 300 feet, to a well depth of 20,000 feet. It is designed to withstand winds of about 120 mph and waves more than 60 feet high.

As the spud tank can be completely retracted inside the platform, there are no protrusions from the platform bottom, making it easy and safe to tow the rig in shallow waters or to trans- port it on a barge or heavy-lift ship. An on-board computer will facilitate efficient rig operation by performing stability and leg load calculations, as well as aiding with drilling, spares management, and equipment maintenance.

JOINER DOORS

THE NAVY'S LIGHTEST AND STRONGEST

JOINER DOORS - IN STOCK

AND AVAILABLE IMMEDIATELY !

Lightweight Honeycomb Doors

U.S. Navy Specified

TYPE 1 TYPE 2 TYPE 3

Aluminum Honeycomb *GRP/Nomex"Aramid

CRES Honeycomb

Steel Honeycomb

TYPE 4 DOUBLE DOOR _ ADVANCED STRUCTURES CORP. 235 WEST INDUSTRY COURT

DEER PARK , NEW YORK 11729 (516) 667-5000 ®i NOMEX ARAMID IS A TRADEMARK OF DUPONT

Circle 245 on Reader Service Card

May 15, 1985 39