Page 75: of Maritime Reporter Magazine (April 1994)

Hellan fluid strainer diagram. unique and standard fixturing. The company also provides test facility design and construction and ma- chine installation at remote sites internationally.

Hydrasearch

Company, Inc.

Circle 63 on Reader Service Card

Hydrasearch manufactures and sells Navy-approved hose and fit- tings in two- through eight-inch sizes to Military Specifications MIL-

H-24135, MIL-H-24136, MIL-F- 24787, MIL-C-24356, and MIL-H- 22240. These products are inter- changeable with Aeroquip 2580, 150901,2652,2560, andFC267 hose.

Related fittings include straight and 90-degree elbow flanged ends, split clamp ends, and hose to hose dogleg fittings. Hydrasearch also manu- factures a complete line of equip- ment for underway replenishment at sea including probes, probe re- ceivers, pelican hooks, strongbacks, and trolleys for fuel, water, and solid cargo transfer-at-sea.

Hydrocomp

Circle 64 on Reader Service Card

NavCad is for the prediction and analysis of vessel speed and power performance for virtually every type of monohull, catamaran and river barge. It also provides for the selection of suitable propulsion sys- tem components — engine, gear and propeller. Not limited to a few basic routines, NavCad provides a complete platform for a steady-state equilibrium analysis of perfor- mance. HydroComp is a consultancy specializing in hydro- dynamic performance and speed/ power prediction. It also provides contract services to design agencies and shipyards, as well as to engine and propeller manufacturers.

Ingalls Shipbuilding

Circle 65 on Reader Service Card

Ingalls Shipbuilding, in addition to producing some of the world's finest surface combatant ships, is continually exploring new market- ing opportunities in international military shipbuilding and in U.S. and international commercial ship- building.

Ingalls is currently involved in priority U.S. Navy shipbuilding pro- grams — Aegis guided missile de- stroyers, LHD multipurpose am- phibious assault ships, and over- hauls of large combatant ships.

April, 1994 1994 Military Suppliers Guide

On the international front, Ingalls has designed a 1,250-ton Corvette and a 2,800-ton Ingalls Frigate.

These potent, survivable platforms incorporate speed, stability and sur- vivability in truly multimission-ca- pable ships. Ingalls is reportedly the only shipbuilder in the U.S. building combatant ships for an international customer, with three ships in pro- duction for Israel. The shipyard is also currently designing double-hull tankers in two different capacity configurations.

Integrated Systems

Analysts, Inc.

Circle 66 on Reader Service Card

Integrated Systems Analysts, Inc. (ISA), offers a wide range of engi- neering, scientific, technical and management support services. Prin- cipal areas of support include: sys- tems engineering; corrosion engi- neering; acoustics engineering; in- formation systems services; inte- grated system hardware/software design and testing; maintenance strategy initiatives and planning; electronics repair and maintenance; and integrated logistics support.

Scandinavian micro systems • Large super-bright Digital Heading Display. • Analog Turning Indicator - allowing instant estimation of turning rate. • Will work from most types of gyro compasses. • Programmable as Master Repeater or Slave

Repeater. • Digital Data output (RS422) - for integration with survey and navigation computers.

CAN

DIGITAL HEADING REPEATERS

P.O. Box 155. N-1411 Kolbotn. Norway Phone +47 66 80 71 07

Fax+47 66 80 80 95

Digital Gyro Repeaters

BRIDGE WING MOUNTING of LR40/LR60 Digital Gyro Repeaters

The LR40/LR60 can now be panel-mounted on the Bridge Wing using a "flip-up" plastic cover.

The cover is specified to IP55.

Circle 267 on Reader Service Card

Salvage Engineering

Naval Architecture

Marine Engineering

Mooring Design

Shaft Alignment

Precision Surveys

DIVERS IFI ED technologies

See us at

Offshore Technology Conference

Booth # 6475 and

International Tug and

Salvage Convention

Computer Aided Design

Computer Aided Logistics Support •

Specialty Equipment Design

Project Management 800.A.SALVOR (toll free) 804.420.9532 (24-hour) 804.523.0810 (fax)

Call or fax for a brochure of our capabilities

Circle 314 on Reader Service Card 61