Page 112: of Maritime Reporter Magazine (October 1997)
Read this page in Pdf, Flash or Html5 edition of October 1997 Maritime Reporter Magazine
PRODUCTS SHOWCASE
Inmarsat-A and B ship terminals permits multiple voice, fax and data transmissions to be made simultaneously between ship and shore.
The multiplexing option takes advantage of Inmarsat-A and B duplex high-speed data (HSD) channels which provide data transmission at 56-64 kbps.
The HSD option utilizes multi- plexers on the ship and at the shoreside destination to subdivide the available HSD channel band- with so that it can be used to sup- port multiple telephone, fax and data circuits at the same time.
The multiplexers can be config- ured to provide considerable flexi- bility in allocating bandwidth for different applications.
The HSD multiplexing option is available with the new MX 2464
Inmarsat-B system and can be added to existing MX 2400
Inmarsat-A ship terminals with
HSD capability.
For more information on
Hughes MAGNAPhone
Circle 11 on Reader Service Card
Hoffer's Flow System
Breezes Through Tests
Recent tests on
Hoffer Flow
Controls flow sys- tem concluded with results within +/- one percent over the range of pres- sures and flow rates tested.
Hoffer's Turbine
Flowmeter
System.
Decrease Cost While
Increasing Reliability and Safety... with Simple to Install, Maintenance Free
Remote Valve Operators (RVOs)
Designed to exceed shock, vibration, and corrosion resistance requirements for navel, commercial marine, and industrial applications, Teleflex RVOs are totally reliable in the harshest environments.
Teleflex Remote Valve Operator Systems from Triumph Controls, Inc. have been successfully installed on U.S. Navy shipboard applications for over 15 years.
Flexible Cable Technology-mechanically transfers rotary on linear motion through complex routings over long distances
Simplified Design-requires less time and manpower for installation
Helix Cable Drive System-operates in a sealed, permanently lubricated environment to prevent corrosion and eliminate maintenance
RVVO: Remote Vent Valve
Operator Systems are lightweight, low-protile operators that bolt directly to flanges of 1/4-turn ventilation valves. Systems incorporate a patented override feature at the valve for local fw^'Ris. operations.
ABS
APPROVED
RMVA: Remote Mechanical
Valve Actuator Systems for applications requiring delivery of multi-turn or 1/4 turn rotary motion from remote locations.
RTVA: Remote Trip Valve
Actuator Systems for appli- cations requiring delivery of quick-acting linear motion from remote locations. Systems include a patented shock compensator coupling.
For information on your application call 800/523-2432,
FAX: 215/699-7080, E-mail: [email protected], or visit our Web site at http://www.triumph-controls.com.
TRIUMPH
CONTROLS INC 205 Church Road •Tllllhplljj
North Wales. PA 19454-0901 '^JflBMP
Phone: 800/523-2432 • FAX: 215/699-7080
Hoffer offers CNG flow systems for applications such as pipeline transmission, bulk transfer and the automotive industry for engine testing. Typically, these systems include the gas turbine meter, temperature and pressure trans- ducers, installation kits and a flowstar flow computer with the
AGA 8 gas flow calculations.
Hoffer also supplies LNG and
CNG custody transfer metering systems to both distributors and original equipment manufacturers for bulk distribution.
For more information on
Hoffer Flow Controls
Circle 12 on Reader Service Card
New Tube-End Preparation
Machines From Wortelboer
Th. Wortelboer has unveiled its new PBM-6 and PBM-12 Tube-
End Preparation
Machines.
Clamping is exe- cuted through a self-centering prism-clamp and
Th. Wortelboer unveils its new tube-end prepa- ration machines. beveling is performed by fixed- mounted insert holders. The range of the PBM-6 clamping is 1.5-6 in. and the PBM-12 is two-12 in. pipe with outside diameters of 48-170 mm and 60-330 mm, respectively.
The turning ranges are 30-170 mm and 40-330 mm, respectively.
These models feature high-speed beveling and eliminate the need for changing clamping parts or adjusting insert-holders.
For more information on Wortelboer
Circle 9 on Reader Service Card
Leica Releases DGPS Unit
A new, low-cost DGPS Reference
Station/Mobile Unit with integrat- ed keypad and display has been introduced by Leica. The 12-chan- nel differential station provides one to three meter accuracies for real-time applications. The MX 9250 is a turnkey, rapidly deploy- able, stand-alone DGPS reference station which is capable of func- tioning completely autonomously without an external computer or specialized software for setup and
Hydraulic mum
Features: • Hard wearing manganese steel vertical rollers rotating on bronze bushings • Optional tow line hold-down and stern rollers available • 8" and 12" diameter pins now available with 12" or 16" vertical rise • 3,4, or 5 pin models and compact unit available
Circle 359 on Reader Service Card
Call or Fax for our free brochure
WESTERN MACHINE WORKS 1870 Harbour Road - North Vancouver,
BC-Canada-V7H 1A1
Phone: (604) 929-7901 Fax: (604) 929-7951
Circle 373 on Reader Service Card