Page 30: of Maritime Reporter Magazine (August 2000)
Read this page in Pdf, Flash or Html5 edition of August 2000 Maritime Reporter Magazine
AJOTUN
What's on the surface will wash off -
Protecting what's underneath is what counts /
Balloxy HB Light for optimum ballast tank protection
Like the human body, Balloxy HB Light provides a tough, flexible, impenetrable barrier - dirt just washes off leaving what is underneath as good as new.
In the ballast tank photo shown below, there is only dirt to be seen.
After one year in service the Balloxy HB Light underneath is in excellent condition - no flaking, no blistering, no delamination and no corrosion. (Above) Sacrificial anodes give added protection to ballast tanks.
Coatings combined with cathodic protection is recognised to be the most effective method of ballast tank protection.
Balloxy HB Light, specially designed for ballast tank protection, has proved its success in the protection of more than 1,000 vessels worldwide.
J more than meets the IMO guidelines for ballast tank protection _| provides exceptional wetting, penetration and adhesion properties • can be applied direct to blast cleaned or power tool prepared surfaces • can be applied in single coats up to 300 microns without sagging (two 200 micron coats are recommended) • is available in light beige and light green colours which help painting conditions, make inspections simpler and stripe coatings easier to apply
Ask your local Jotun office for further information ^JOTUN
Jotun Paints, Inc. 1401 Severn Street, Baltimore, MD 21230
Tel: 1 800 638 7756 / 410 625 7200 Fax: 410 752 0027
Jotun Powder Coatings, Inc. 15344 East Vantage Parkway, Suite 100, Houston, TX 77032
Tel: 281 219 3747 Fax: 281 219 3543
PRS and Jotun Paints, Inc. 9229 Highway 23, P.O. Box 159, Belle Chasse, LA 70037
Tel: 1 800 229 3538 / 504 394 3538 Fax: 504 394 3726 www.jotun.com
Circle 257 on Reader Service Card