Page 19: of Maritime Reporter Magazine (May 2002)

Crankshaft Care Key to Vessel Profitability

Mark van Schaick Marine Services is a relatively new company, based in

Schiedam (Port of Rotterdam) specializing in crankshaft repair, repair of engine and industrial parts, technical consultancy, and marine and industri- al spare parts.

The company has capacity at its workshop for grinding crankshafts up to 20 ft. (6 m) on a lathe built by Naxos Union. As a result of a co-operation with Mitchell Shackleton in the U.K., crankshafts up to 39.5 ft. (12 m) can be repaired. Every possible kind of crankshaft can be checked, ground, pol- ished, straightened, hardchrome-plated and hardchrome-ground. If a client requests, the company will undergo inspection by certification and classifi- cation societies. Repairs can also be carried out on turbine parts, engine blocks, connecting rods and pistons.

Avoid Serious Crankshaft Damage

As maintenance is becoming more important with high output diesel engines, especially when it comes to crankshaft failure, the company offers the following advice to potential clients:

In the past, the material used for a crankshaft was, for example CK40, which after a bearing failure and overheating does not show extreme crack- ing or increase in hardness. This meant that such shafts could be ground undersize and re-used without any restriction.

Today, engines have high-tensile steel crankshafts with non-hardened or hardened running surfaces; after a bearing failure and overheating most of these shafts are beyond repair. The non-surface-hardened shafts react on an overheated bearing with very hard spots up to Brinell 600 (about Brinell 300 is allowed), bending and often severe cracks. The available undersizes are normally not enough to salvage the shaft.

Surface-hardened shafts, on the other hand, lose their hardness when a bearing gets overheated and will often crack as well. This is also a reason for rejection because the hardness is totally gone in particular locations and will not come back when the shaft is ground undersize.

Rejection of the shaft can be avoided by keeping an eye on the following points: •Keep the oil in good condition, take samples and have them examined. •Check the big ends of the connecting rods and repair them if ovality exceeds the limit. •Check the ovality of the crank pins and the wearstep between the webs. If there is a serious wearstep between the crank webs do not fit new bearings without removing it. •Check the torque of the connecting rod bolts and main bearing cap bolts.

Use a calibrated torque-wrench. •Renew bearings according to maker's specifications. •Renew connecting rod bolts according to maker's specifications. •Make sure that the engine has no misalignment. •Check vibration damper according to maker's specifications.

Circle 39 on Reader Service Card www.maritimereporterinfo.com

May, 2002

ISLAND BOATS, INC.

ALUMINUM CATAMARANS & UTILITY CRAFT

VESSEL SHOWN IS A 60' x 20' USCG CERTIFIED 100 PAX EXCURSION/FERRY

CATAMARAN. DESIGH BY MORRELLI & MELVIN

FEATURES •USCG/ABS CERTIFICATION 'HULLS TO 100' •RUGGED ALUMINUM HULLS "CAD/CAM METHODS "NC PLASMA CUTTING •SEVERAL STOCK HULLS "PLANING & DISPLACEMENT HULL • COMPETITIVE PRICING TO EAST/WEST COAST BUILDERS • BOATS UNDER CONSTRUCTION (2) 65' UTILITY LANDING CRAFT

PASSENGER FERRIES • SHIP TENDERS •

EXCURSION VESSEL • PILOT BOATS • CREW BOATS

ISLAND BOATS, INC. 6806 HWY 90 EAST NEW IBERIA, LA 70560 PH: 337-560-4483 FAX: 337-560-4473

EMAIL: [email protected]

Circle 230 on Reader Service Card or visit www.maritimereporterinfo.com "Now I can say

I have a job and a life..." "Taking hold of my life means finding challenging work with great pay and benefits. It also means taking time for travel and adventure. At Military Sealift Command you'll find all of these things and more. You'll travel to Europe, Asia,

Australia and the Caribbean while earning excellent pay.

Your seagoing skills will help to supply our military men and women around the world."

Learn new skills and advance quickly in our growing organization. Your professionalism and readiness for challenge will be rewarded. You'll get top pay and excellent leave, health and retirement benefits. You'll experience the highest quality of life aboard ship, including excellent accommodations, great food, and amazing ports of call.

If you have experience in deck, engineering, medical, sup- ply, food service, communications, electronics, or are a search and rescue swimmer, or underway replenishment specialist,

MSC can put your professional skills to work immediately

Get a life Call 1-877-292-7709 today.

MSC is an equal opportunity employer and drug-free workplace.

Military Sealift

Command www.msc.navy.mil

Circle 201 on Reader Service Card or visit www.maritimereporterinfo.com 19