Page 29: of Maritime Reporter Magazine (October 2003)

Read this page in Pdf, Flash or Html5 edition of October 2003 Maritime Reporter Magazine

Repair & Conversion

Bollinger Completes Major Conversion of Ned Ferry

Bollinger Shipyards, Inc., has completed a major conversion of the Crescent Towing tug, Ned Ferry that transformed the boat from a single engine vessel with 3,500 hp, to a twin-engine vessel with 4,000 hp. It is the third of eight Crescent Towing 105-ft. (32 m) sister ships to undergo the same upgrades and modifications at Bollinger Algiers LLC, the New Orleans based repair and conversion shipyard facility.

Ned Ferry's old engine was replaced with a pair of

Caterpillar 3512B engines coupled to Reintjes

WAF673 reduction gears driving 83-in. Bollinger stainless steel propellers.

They were installed in 84-in. type 37 kort nozzles with stainless steel inner rings and leading and trailing edges. It has a 45-degree rudder angle for better maneuverability and its new power package is designed to generate 100,000 lbs. or 50 tons of bollard pull. The boat's stern was modified to accommodate the new propulsion system. extend the productive life of vessels while helping to keep their owners costs down without the higher costs of newbuilds."

The G. Shelby Freiderichs, Mississippi, Margaret F.

Cooper, Texas and Glenn will follow the Ned Ferry.

Each measures 105-ft. long with a 26-ft. (7.9 m) beam and 13.5 ft. (4.1 m) depth. They were built in the late 1950s and early 1960s.

Crescent Towing's twin screw docking tug, Ned Ferry, on trials in the Mississippi River. It is the third of eight Crescent Towing 105- ft. sister ships to undergo the same upgrades and modifications at Bollinger Algiers LLC, the New Orleans based repair and con- version shipyard facility.

Bollinger has reconstructed the tug's wheelhouse with low profile stacks for maximum visibility and has installed new radars, GPS, depth sounders, hailers,

VHF radios, fax machines, sound powered telephones, fuel emergency shut off systems, and remote control start and stops for the main engines.

New Coast Guard approved oil and water separators and sanitary systems have been installed and channel coolers were replaced with keel coolers. Living spaces and the galley were refurbished and new air condition- ing and heating installed.

Mike Ellis, executive vice president and COO of

Bollinger said, "This modernization project for

Crescent Towing is similar to the U. S. Navy's SLEP (Service Life Extension Program) in which ships receive upgrades to their design as well as the installa- tion of new leading edge machinery and electronic technologies. Executives at Crescent have told us their two other tugs, Louisiana and Florida (formerly

Louise) that have already been converted, are perform- ing beyond expectations. Conversions such as these

Underwater

Security &

No Danger to Divers

Send the 8-pound VideoRay®ROV (remotely operated vehicle) underwater to inspect hulls, docks, mooring buoys, bridges, dams, nuclear power plants and other submerged structures. The hi-res camera onboard the submersible captures and displays crisp video on a ship's

TV system or a monitor on land.

Check for explosives before ships dock and retrieve items in excess of 100 lbs./50kgs with the YideoRay manipulator. Running from an inverter or generator, VideoRay goes wherever it is needed. A proven performer in agencies of the Federal,

State, and Local governments, put

VideoRay to work for your peace of mind.

VideoRay

VideoRay LLC 400 Eagleview Boulevard Exton. PA 19341 USA

Ptl +1 610458-3000 Fax +1610 458-3010 www.videoray.com

Smart Electronic

Level Switch with

No Moving Parts

The Sea Switch Two was designed and patented for ail tank applications. The Sea Switch Two offers a reliable solution for liquid level detection and control for cargo, ballast, and storage tanks, without any moving parts.

The Sea Switch Two uses a fully static system that is based on the propagation of an acoustic wave into a metallic rod. A piezo-electric sensing element produces a wave along the rod. As the liquid reaches the sensing element the oscilla- tion stops and the alarm is activated.

The Sea Switch Two sensor detects high, high- high, or low level in any liquid with an alarm output given by a dry contact or current loop change 6-18 mA. • Easy installation • Self-test built-in • Fully static system - no moving parts s

ELECTRONIC MARINE

SYSTEMS, INC. 800 Ferndale Place

Rahway, NJ 07065 ^ Call today for more information! 732.382.4344 732.388.5111 lax [email protected] e-mail http://www.emsmarcon.com

Circle 312 on Reader Service Card Circle 240 on Reader Service Card

October 2003 27

Maritime Reporter

First published in 1881 Maritime Reporter is the world's largest audited circulation publication serving the global maritime industry.