Page 38: of Maritime Reporter Magazine (December 2003)

Products

A.L. Don Company\ - SOLAS Ladder Series.

These ladders are manu- _ factured to meet and ~ exceed all SOLAS

Regulations and IMO

Standards, But with the same patent- ed design as found in their U.S.C.G.

Approved Ladders. Unlike other

SOLAS Ladders, steps can be replaced quickly and easily right on board without unstringing the ladder or the need for any special tools.

Circle 101

SystemsN Allied

Allied's DT Series cranes offer fixed length, double taper, sealed box boom construction for durability and toughness in angels from 2 to 125 tons with boom lengths up to 125 ft.

This unique double taper, sealed box boom design absorbs hocks caused by impact from the lifted loads.

Circle 102

Atlantic N a Cordage &|\ Atlantic cordage

LB lever hoists combine easy operation with a compact, reliable design that easily handles the real-world demands of contractor and industrial applica- tions. Examples include day-to-day maintenance, machine repair, con- struction, service, and manufactur- ing operations. You'll find every job goes easier thanks to smooth, reli- able lifting and pulling actions. ^Circlel03

Coastal Marine ^ f Equipment

MCf HH Coastal Marine

Equipment's Anchor

Windlasses are supplied with catheads, lever operated jaw clutches and hand wheel operated band brakes. All Anchor Windlasses are available in electric or hydraulic drive and can be supplied constant speed, multi-speed and variable speed. Hydraulic drives operate off central hydraulic system or dedicat- ed system supplied with unit. ^Circle 104

Duramax

Industrial Bearings are ideal for pump installations where bearings are sub- merged or where water can be piped for lubrication.

They are available for centrifugal, horizontal and vertical applications.

Specially formulated polymers resist chemical corrosives and abrasives and absorb heavy impacts.

Circle No. 105

E-Crane >

The Equilibrium wtk^,* crane, is a multifunc- " ^ lip tional crane for heavy-duty material handling applica- tions. The E-Crane features an unprecedented reach of up to 150 feet, lifting capacities of over 30 US tons, push down force equal to 50% of the rated capacity, and significantly reduced power con- sumption and operating costs.

Circle 106

Hyde Marine

The OptiMar Ballast

System offers an effective and reliable solution based on solids separation and UV irradia- tion. The OptiMar system utilizes existing ballast pumps and piping.

Standard systems are available for flow rates from 100m3/h up to 3000m3/h. The MicroKill

Separator is ideal for high flow applications or as pretreatment to the MicroKill Filter.

Circle 107

Intercon >

The Intercon Coupler

System provides a safe and efficient solution to the problems of con- necting tugs and barges in ocean and coastwise pushing operations.

In simplest form, the patented

Intercon System provides a single degree of freedom allowing the tug to pitch about a transverse connec- tion between the tug and barge.

Circle 108

Interocean

Systems

The S4 Current

Meter is used for water current sens- ing. The instrument is the self-con- tained current measuring sensor, enclosing all necessary solid-state electronics for acquiring, processing and outputting data. The S4 is designed to measure the true magni- tude and direction of horizontal current motion in any water envi- ronment.

Circle 109 V " Liebherr ^ -y TheCompact

Board Offshore

Crane's lifting capacity is available from 25 up to 150 metric tonnes. The CBO crane is a weight optimised crane system and suitable for both floating and fixed applications offshore. Within each model size, the power drive train can be chosen to be electric or be a diesel engine.

Circle 110

Lodic '

Shipshape is an inte- grated ship design and hydrostatics/sta- bility package for early-design studies, feasibility studies, concept evalua- tion, stability and loading condition calculations, etc. The system is known for its user friendliness and speed, and packs a host of advanced options to cover almost all require- ments imaginable within the field of stability.

Circle 111

MorganCrane\

Morgan marine cranes offer excep- tional performance coupled with ease of operation. The controls are fully proportional for precise, controlled motions.

Redundant safety systems offer pro- tection from unexpected conditions.

These lightweight, high-capacity cranes occupy a minimum of space by stowing compactly, yet offer impres- sive reach and lifting capacities.

Circle 112 " jHJH Scan Pacific ^

I^J^'tU Dre8£cn En£ine

Room Crane For handling of pro- vision and machinery parts below deck level and to do service on the main engine, Dreggen delivers engine room and service cranes. These cranes are equipped with rack and pinion drive for operations to count- er 2/5 degrees trim and heel.

Standard capacity up to 20 tons.

Circle 113

A SLM > Millennium-2000 Series Capstans fea-ture the latest high performance right angle drives which can maintain a very high efficiency over a wide range of ratios. Often this allows SLM to give you more line pull for the less horse power than traditional worm and spur drives. This translates into performance and cost combinations.

Circle 114

Viking >

Viking Pumps' new line of Mag

Drive Magnum seal-less pumps features a thrust-controlled design that allows a short-term run dry capabilities. This design all but eliminates damage resulting from priming and accidental empty tank situations. Reversible-direction-of- flow pumps are ideal for hazardous or hard-to-seal liquids.

Circle 115

Solar Solve

Solar Solve Marine - custom made sun- shades for all ships window locations.

Choose from the

Type Approved

SOLASOLV range of anti-glare, heat rejecting solar shades for bridge windows, or the ROLA-

SOLV ange of fabric roller shades and blackout shades for cabins and public areas.

Circle 116

Ameripacl<\

Ameripack offers a complete line of the brightest and most com- pact battery operated Flashlights for

Dive, Maritime and industrial appli- cations, with features such as

Xenon, HID & LED Technology;

Gasket Sealed with a rugged ABS casing; Waterproof to 500 feet; Over 13 models to select from to suit your application; Rechargeable models and made in USA.

Circle 117

Kb&PMWLt Edgewater >

Edgewater

Machine &

Fabricators, Inc. has been a diversi- fied manufacturer within the marine industry for 40 years. Edgewater operates a quality assurance system with rigid adherence to the MIL-I45208A standards for quality and excellence, assuring com- pliance to all customer specifications.

Circle 118 mt&mom

Remontowa

Remontowa converted barges used for The Hibernia Project's (the world's heaviest offshore structure) topsides transport and mating opera- tions. The contract signed with the

Norwegian offshore specialist

Neptun Heavy Lift AS strengthend and elongated the barges.

Circle 119

Leslie ControlsN

Leslie Controls has released their new

Steam & Thermal

Fluid Controls brochure. The new ^-l^ffiM brochure includes photos and descrip- tions for every product in Leslie's extensive line, suitable for

Industrial/Commercial, Power,

Process and Maritime applications.

Circle 120 ^ % Lantec

LtMTte' Lantec has introduced its w -f newest product, the LH

Series Hoist. Specifically designed for Offshore Cranes, this new hoist series includes more than 10 models to suit nearly any crane.

Features include long-life gearing, improved high-capacity sprag clutch, stable and reliable brake valve, and footprints identical to competitive models.

Circle 121

TensioiK

Technology

Optimoor is an easy- to-use mooring analysis computer program for use by vessel and terminal personnel as well as by port designers and naval archi- tects. It is based on the OCIMF rec- ommendations and procedures and includes OCIMF wind and current coefficients for tanker moorings. ^Circle 122

BIO OILS • « ( Vickers \ Vickers have now developed biodegradable ver- sions of their specialised sterntube oils. These new products, the award winning Hvdrox Bio 68 (Seatrade

Award Winner 2003), Hydrox Bio 220 and Hydrox Bio 100 are of low toxicity to marine life including fish and shrimp. They are stocked world- wide.

Circle 123

WSC N

Washington Chain & Supply, Inc. (WCS) has been serving the marine, industrial and offshore industries for more than 35 years. WCS maintains one of the largest inventories of domestic and foreign, new and used anchors,

WCS can supply ABS, DNV and

LLOYDS certifications and has pull-testing facilities capable of han- dling 2,000,000 pounds.

Circle 124

WW Patterson>

Quickly and easily secure loads.

Tensors are an ideal industrial tool for any tensioning or pulling applica- tion. Many styles are available.

Tensors have a screw-type action with eccentric loading. By turning the drive head, the large tube telescopes over the inner tube and pulls the anchoring points together.

Circle 125 36 December, 2003