Page 41: of Maritime Reporter Magazine (January 2004)

Titan 2 Refurb Delivers Unexpected Benefits

When Global Industries contacted Thrustmaster of

Texas to help upgrade the Titan 2 heavy lift vessel for dynamic positioning (DP), the Louisiana-based company found more benefits than expected.

Although not one of the original goals, a result of the conversion was a vessel that can maintain station for at least 30 minutes during a complete blackout.

With the self-reliant thrusters used in this upgrade, said Keith Hebert. DP group operations supervisor, the Titan 2 will not drift during a 30-minute black- out. The Titan 2 was self-propelled with two main Z- drives of 2,200 hp each, and two tunnel thrusters at 200 hp each. The Thrustmaster conversion added eight 1,000 hp hydraulic azimuthing thrusters and eight self contained Hydraulic Power Units (HPU's) to the heavy lift vessel. The conversion of the Titan 2 to a DNV class AUTR DP vessel began in mid 2001. Minimal modifications to the hull and existing shipboard systems reduced time to the February 2002 delivery. "We didn't have the added expense of dry docking and cutting into the hull to add the thrusters," Hebert said.

Since its delivery, the vessel has worked in the Bay of Campeche for Pemex, and in its first year of oper- ation it logged over 6.000 hours with 100 percent availability.

The Bollinger Calcesieu Shipyard in Louisiana installed all of the DP equipment, Thrustmaster thrusters and deck-mounted Hydraulic Power Units.

The shipyard also performed the hull modifications to accept the thrusters, which were mounted with minor structural support modifications to the hull.

Each thruster unit has a dedicated diesel engine powered Hydraulic Power Unit for propulsion and azimuthing. Although the DP system is sometimes considered as just the computer, the entire vessel should be considered a system. Most DP systems rely on the vessel power plant for power to the thrusters, so anything connected to the power plant can affect the system.

The Conversion

Global Industries installed eight Thrustmaster

Hydraulic Azimuthing units - six at the bow and two at the stern. The existing vessel controls were mod- ified so the new DP system could control the origi- nal thrusters without affecting the original controls.

Although the existing tunnel thrusters interface to the DP system, the company anticipates using them only in extreme environmental or job conditions.

Bollinger installed a Kongsberg-Simrad SDP21 and a Kongsberg Norcontrol Monitoring and Alarm

System on the vessel. The DP system provides inputs for two survey-supplied DGPS inputs and the existing ship's gyro. The system also includes two 3

KVA uninterruptible power supply (UPS) units, which provide up to 30 min. of battery-supplied power to the DP hardware.

The shipyard installed the containerized HPU's on the main deck near the associated thruster units. The

HPU units, supplied by Thrustmaster, were com- plete and only needed to be secured to the main deck. Running the hydraulics from the containers to the thrusters by hose instead of stainless pipe short- ened the delivery time by several weeks and saved 80'/r. Although not one of the major design goals, one of the biggest benefits of each thruster having its own self-contained power unit was the fact that the vessel could continue to maintain station after a total blackout of the ship's electrical plant. Except need- ing pressure to fill the fuel tanks occasionally, the new thrusters do not require the main power plant to operate.

Station-keeping during a blackout is limited to a half-hour because that is the capacity of the DP sys- tem UPS units with the current load. Additional power could be supplied to the UPS batteries to extend station-keeping capability indefinitely during a blackout. The Thruster package design avoids the need for accurate rpm control or coordination between multiple engines. Individual diesels take care of individual thrusters. Controls are simplified compared to a bussed diesel-electrical power plant.

A failure in a diesel engine or associated hydraulics cannot cause the loss of more than one thruster.

Circle 38 on Reader Service Card

Renold Couplings for AHTS Fleet

Renold Hi-Tec Couplings won a contract to sup- ply DCB 838.0 rubber in compression shaft cou- plings for marine propulsion systems to be installed in a fleet of anchor handling/tug supply (AHTS) vessels. The first of the vessels, MV JP Laborde, is be ing built at the Yantai Raffles Shipyard in China for Tidewater Marine. Each of the vessels is 282-ft. long and dynamically positioned with a bollard pull in excess of 200 tons. They will have the ability to handle anchors in depths in excess of 5,000 ft.

Renold was awarded the contract by Karl Senner,

Inc., who is responsible for supplying Reintjes DLG 4447U twin input/single output reduction gear for the five vessels. The DCB couplings are to be installed in the drive train between each of the

Amerimex electric motors and reduction gearboxes. wmwm which in turn drive the azimuth reversible thrusters. which provide the propulsion.

Circle 24 on Reader Service Card

THE ONLY EVACUATION

SYSTEMS THAT ARE

US COAST 6UARU

APPRUVEH.

Evacuation Slide System.

Designed specifically for Low Freeboard Ves- sels. it is a combination slide and platform. It provides speedy evacuation for all passengers - young, old and physically challenged.

US Coast Guard Approved.

Evacuation Chute System.

The most efficient, easy-to-use. flexible, and cost-effective marine evacuation system avail- able in the world. It evacuates passengers and crew in the shortest possible time.

Manufactured to meet or exceed all SOLAS requirements. US Coast Guard Approved

We manufacture the only single 100 person

Reversible Inflatable

Platform built in North America

These sturdy platforms are designed for pas- senger carrying vessels operating in protected waters. Fully reversible - it offers instant board- ing. which ever way it inflates. Also available in 10. 25 and 50 person sizes. 101-3760 Jacombs Road, Richmond

British Columbia, Canada V6V 1Y6

Ph. (604) 278-3221 Fx. (604) 278-7812 1-800-931-3221 ' - sales ©zodiac.com www.dbcmarine.com

Circle 210 on Reader Service Card