Page 66: of Maritime Reporter Magazine (June 2015)

Success for a BWMS Newcomer 70 ballast water treatment systems in two years

MMC Green Technology has sold more than 70 ballast water treatment sys- tems since it went commercial with its

Cimolai Technology SpA is an Italian-based company that specializes in the design, fab-

MMC BWMS two years ago. “With rication and installation of special lifting and transporting equipment for marinas, ports 40 systems installed, we are starting to and shipyards.

get feedback from the operators,” says

Its ? agships are:

Børge Gjelseth, sales and marketing - The biggest boat hoist in the world, lifting capacity 1100 ton., at work in Qatar director at MMC Green Technology. - Ten boat hoists capacity 820 ton., with an additional two units due for delivery by “Recently we signed ten orders, where end of 2015 the vessels and clients consists of two - Two shipyard cranes on tyres, capacity 1000 ton. each windmill support vessels for Bernhard

Schulte built at Ulstein, two general

Contact information cargo/container vessels for Royal At-

E-mail: [email protected] lantic Lines built at Remontowa Ship- building, three live ? sh carriers built at

Website: www.cimolaitechnology.com

Aas Mekaniske; two for Sølvtrans and

Telephone: +39 049 9404539 one for Bømlo Brønnbåtservice. In ad- dition one 2,800 passenger Ro-Pax ferry is being built at Meyer Turku for Tallink (pictured), one accommodation and work barge owned by Dalby Offshore to be retro? tted in Poland, and one live ? sh carrier to be built at Larsnes Mek.” parts, ensures consistent installation and ric press-? t system composed of CuNi provides substantial gains in productiv- 90/10 alloy, suitable for class 3 piping ity. The Style 177 ? exible coupling can systems in fresh and seawater applica- accommodate pressures ranging from tions. Press? tting SS is a metric press- full vacuum (29.9 in Hg/760 mm Hg) ? t system composed of 316L Stainless up to 1000 psi/6900 kPa. The coupling’s steel, suitable for Class 3 piping systems maximum pressure rating will depend in potable water, assorted fresh water, as on the diameter and wall thickness of well as condensate and compressed air the pipe. Performance data presented in systems. Steckdrain is a metric push- this document is based on use with stan- ? t system composed of 316L stainless dard wall, carbon steel pipe. For use with steel, designed for gravity as well as

SeaCor Thermoplastic stainless steel pipe, please reference doc- vacuum, grey and black water drainage

Piping System ument 17.09 for pressure ratings and end systems. All are approved by major class

Viega MegaPress

Georg Fischer Piping Systems has part- societies.

nered with W&O to deliver commer- loads. When used on light wall stainless Do more with the Viega MegaPress sys- cially available USCG-approved marine steel pipe, the Victaulic RX roll set must tem, the press ? tting system for both water and gas applications in black iron thermoplastic piping system, SeaCor, be used to roll groove the pipe.

which meets IMO and USCG require- pipe. Flameless and clean, Viega Mega- ments for ? ame spread, low smoke and Press ? ttings can be installed while the toxicity. It also carries Type Approval system is live, which means you don’t from American Bureau of Shipping. need to shut a system down completely

SeaCor provides a myriad of bene? ts to before making connections. Viega press ship owners and operators, in weight and technology joins black iron pipe reliably cost savings. Weight savings can result through the engineered design of the ? t- in increased ship ef? ciencies, such as re- tings and the use of the press tool.

Water Cannon Debuts New duced fuel consumption.

Pressure Washer Features

Water Cannon, Inc. announced new

Perma-Pipe Fuel-Gard and product developments for its eco-friend-

XTRU-THERM ly Hot Water Diesel Pressure Washer

W&O is the North American maritime Skid Package. The new series, tailored distributor for Perma-Pipe pre-insu- for the industrial, marine and rental mar- lated and containment piping systems kets worldwide, is powered by a Kubota for LNG and other cryogenic systems. Z602B1 or DH1005B1 engine roll-cage

Perma-Pipe Fuel-Gard is an all-stainless protected pressure washer built to prep double wall construction with complete surfaces and destroy even the most stub- testing and traceability on all materials, born contaminants common in commer- conducted in the company’s ISO 9000 cial settings. With up to 8.0 GPM and

QuickVic Flexible Coupling and class society approved factory. It is 4,000 PSI, the hot water pressure washer

The Style 177 QuickVic ? exible cou- pling is installation-ready, and joins used in enclosed space applications. XT- has a General or Annovi Reverberi pump

Chibro 2-8”/50-200 mm standard roll grooved RU-THERM is a polyethylene-jacketed, W&O offers Ilta/Chibro no-weld marine and ? ve-year manufacturers’ warranty polyurethane-insulated system used for piping systems: Cunipress, Press? tting coverage, including an engine warranty, and cut grooved steel pipe. The cou- pling’s unique design eliminates loose above-deck applications. and ? ve-year prorated coil warranty.

and Steckdrain. Cunipress is a met- 66 Maritime Reporter & Engineering News • JUNE 2015

MR #6 (66-73).indd 66 MR #6 (66-73).indd 66 6/9/2015 9:48:39 AM6/9/2015 9:48:39 AM