Page 29: of Maritime Reporter Magazine (June 1974)

DIESEL

GENERATOR SETS 350 KW DIESEL

GENERATOR SET

ELECTRIC

PROPULSION

MOTOR 1 Available. 515 HP—230 volts DC—shunt wound — 1040/1400 RPM—1660 amps—120 volts DC exciter. 8 10

ALSO SUITABLE FOR COMPANIES

OPERATING AN NET TENDERS

TURBO

GENERATOR SETS 400 KWWESTINGHOUSE

TURBO GEN SETS FOR

BETH. SPARROWS PT.

HULLS 400 TO 4500;

QUINCY HULLS 1600 400 KW (500 KVA)—80% PF—1200 RPM—450/3/ 60. TURBINE: 585 lbs—840°TT—28'/2" vacuum— 9018 RPM—serial 10A4462-3 & 10A4462-4. GEAR: 9018/1200 RPM. A.C. GENERATOR: 500 KVA—400

KW—450 volts—641 amps—80%PF—3 phase 60 cycle—1200 RPM—CR 40°—excitation amps 41 — excitation voltage 120. Instruction book 5442. Switch- gear available.

LOW-PRESSURE

UNUSED 300 KW G.E. 120/240 VOLT DC

TURBO-GENERATOR SET

GENERATOR: 300 KW—120/240 VDC—1250 amps— 1200 RPM. REDUCTION GEAR: 8.344:1— 10012/ 1200 RPM—type S-182. TURBINE: DOR418N—449

H.P.—10012 RPM—working pressure 180/220 PSIG

WESTINGHOUSE 440/3/60 200 KW UNIT

GENERATOR: Westinghouse 200 KW—250 KVA— 450/3/60—1200 RPM—80% PF—with 40 KW—120

VDC on same shaft. GEAR: 9989/1200 RPM—double helical. TURBINE: Westinghouse — 540 PSI—super- heat 322°F. Test 930 PSI 800°TT. Also operate 615

PSI—850°TT. 1250 KW G.E. 10-STAGE

TURBO GENERATOR

SET

TURBINE: 525—615 PSI—S50°TT—7938 RPM—10- stage—type FSN. GEAR: Single helix—7938/3600.

GENERATOR: 1250 KW—450/3/60/3600—.80 PF— type ATB with surface air cooler. Overload 25%— 2 hours—1563 KW. 11 6 EQUAL-TO-NEW

LATE TYPE 500 KW

SHIPS SERVICE TURBO

GENERATORS 1962—DeLaval. Very lit- tle use. Completely pre- served with rotors and di- aphragms crated sepa- rately. TURBINE: DeLaval —585 PSI — 840°TT—6- stage—6391 RPM—class

CD — Also suitable 440 lbs.—740°TT—25" vac. GEAR: 6391/1200 RPM.

GENERATOR: Allis-Chalmers — 450/3/60. Totally enclosed, with static exciter and voltage regulator system. Weight 17,665 lbs. Complete with latest dead front switch gear. Also available are the con- densers, circulating and condenser pumps. All very up-to-date, compact construction. Turbines will easily handle 600 KW if up-grading is desired. 12 AP2 VICTORY WORTHINGTON-MOORE

CROCKER-WHEELER 300 KW UNIT

TURBINE: 440 PSI—740°TT—28'/2" vacuum—type

S4 — 5-stage —6097 RPM — serial 7547 & 7548.

GEAR: 6097/1200. GENERATOR:- 300 KW—120/240 volts DC—1250 amps—compound wound—973643— 999759. Armature flange 8V2"; B.C. 7"—12 holes.

ALSO NEW ARMATURES IN' STOCK & 300 KW

SHUNT ARMATURES. 13

TWO 538 KW

WESTINGHOUSE

T-2 AUX. GENERATORS (COMPLETE)

TURBINE: 538 KW @ 5010 RPM—438 PSIG— 750°TT—28V2" vacuum. GEAR: 5010/1200 RPM.

A.C. GENERATOR: 400 KW 450/3/60/1200—0.8

PF. DC EXCITER: 32.5 KW—120 volts (variable voltage)—shunt—4-pole—DC excitation 5 KW.

ALWAYS WELL MAINTAINED BY MAJOR OIL CO.

TURBINES & ROTORS

MAIN PROPULSION 14 15 16

BETH. CLASS—13,600 H.P.

Sparrows Point & Quincy 1600 hulls. H.P. turbine cos- ing only. Excellent blading & labyrinth packing.

H.P. & L.P. COUPLINGS

I Set—for Beth Class 13,600 HP 4400 hulls and

Quincy 1600 hulls.

G.E. 6690 HP @ 7062 RPM

HIGH PRESSURE 8-STAGE

TURBINE 835 lbs—840°TT—#83341—originally built for Esso

Christobol—Newport News.

T-2

TURBINES & ROTORS 17 2 COMPLETE T-2

G.E. TURBINES #61818 and #61834—large Lynn—all stages magnafluxed.

ROTOR WILL INTERCHANGE WITH

ELLIOTT MAIN TURBINE

Will Sell Rotors Separately 18 19

T2-SE-A1

MAIN PROPULSION

ROTOR—G.E.

Large Schenectady — serial 77418-—reconditioned Beth- lehem Steel 1970—all stages magnafluxed.

T-2 TANKER

UNUSED—4 UNITS AVAILABLE

AUX. G.E. TURBO GEN. ROTORS ««SK®== DORV — 325M — 5645 RPM — for 525 KW G.E. 20 21 • ttOUNP THc . ^nunrrii,.

Main Office: (30

TURBO GElv — iP- !

TURBINE: 1 1 Stage type FN4— 8145 RPM—3V2" : absolute back pressure—complete steam with seal regu

GEAR: Type S-195A—reduction 8145 RPM to 1200

GENERATOR: 1500 KW —450 volts—2405 amps- enclosed. Insulation: Class B stator and rotor. Temper thermometer. Mfg type ATI—form HL. Oil lubricatec sump in turbo generator set base. Generator coolin —120 volts —1 10 amps—40°C rise—frame 654—

GENERAL INFORMATION: Overload rating 2 hours- weight 36,000 lbs. Guaranteed steam flows & condi flange. The set will carry 1500 KW with steam cond flange. The set will withstand 644 PSI and 850°F. at exhaust flange: 50% Load — 750 KW — 75% Load — 1125 KW — 100% Load — 1500 KW —

Exhaust flange size: 18" x 38" rectangular.

GENERATOR: 400 KW 450 volts 3-phase 1200 RPA sulation—natural self-ventilated cooling. Exciter: 5C

GEAR: Single helix—single reduction—10059/12001

TURBINE: Six stage—10059 RPM—525 PSI—825°| tors. OVERLOAD CONDITIONS AT NORMAL STEAA overload for 2 hours at normal conditions; overload | turbine generator will deliver full load output 400 capable of withstanding 634 lbs PSIG 850°TT.

STEAM FLOWS 100% Load — 400 KW AC 75% Load — 300 KW AC 50% Load — 200 KW AC

When operating at 575 PSIG & 0° Superheat and l| 125% Load — 500 KW AC 100% Load — 400 KW AC 75% Load — 300 KW AC

UNIT DESIGNED FOR NAVY FOR DD692 CLASS

HOUSE 8316.

Since Westinghouse and G.E. built them for the san able.

DIMENSIONS: OAL 10' lOKs"—OAW 4'WV2"—0/

TOTAL WEIGHT: 14,855 lbs. 2" steam inlet—17" Round exhaust—2OV2" bolt

UNIT DIMENSIONS OAL 16' 33/a"—OAW 6'6' 350 KW—120/240 volts DC—600 RPM—compound wound G.E. generator with switchgear. ENGINE: Inger- soll-Rand—heavy-duty type S—505 HP—101/2x12— reconditioned to ABS. 250 KW DIESEL

GENERATOR SET v u-A ENGINE: Enterprise 12 x 15 (({lUil DSG-6 — 6 cyl. — 450 RPM

WtrMawP crank No. 50J. GENERATOR: .. QE^raaSOl Westinghouse 250 KW—120 - >'mi: V> ' t S&; /240 DC—1040 amps—450 •BSHaFTSVPP* RPM- Typical serial No. 3S- «"'«*' V*"fV-«J[ 10P-913. Complete with • * * - switch gear.

EMERGENCY GENERATOR

SUPERIOR 75KW 120/240 VOLT D.C.

DIESEL GENERATOR SET

With switchgear. ENGINE:

Radiator cooled Superior GBD -8 — 6-cylinder—1200 RPM.

GENERATOR: Electric Ma- chinery Co.—120/240 volts

DC—316 amps—1200 RPM _ —stab, shunt. 415 KW 250 VOLT DC

GM 6-278 DIESEL GENERATOR

SETS

ENGINE: GM Model 6-278— 6-cylinder—8V2 x 10'/2 — 2- cycle — 800 RPM — complete with heat exchanger. GENE-

RATOR: Allis-Chalmers—415

KW—250 volts DC—800 RPM —1660 amps—shunt wound.

Top mounted exciter—800/ 1600 RPM—208 amps—type

EB5-123. Pilot exciter 21/2KW —120 volts DC—shunt wound—20.8 amps. Both exciters belt-driven from main generator shaft.