Page 29: of Maritime Reporter Magazine (January 2000)

HMS: Outfitting ferry for safety, success

Operating between Nassau and Harbor Island and

Eleuthera in the Bahamas, M/V Bo Hengy carries passengers daily for this ferry service that provides an innovative form of transportation, inter-island in the Bahamas. Until now, the only form of trans- portation on this route was via air, mailboat or pri- vate vessel.

Along the designated route for Bo Hengy is a treacherous three-mile section located at the north- ern tip of Eleuthera. Known as the Devil's Back- bone, this is the sole way around the north end - the primary destination of Bo Hengy. As a result, a comprehensive risk assessment was carried out to evaluate the risks associated with operating the ves- sel on the inter-island route.

The IMO High Speed Craft Code (HSC Code), was evaluated from a standpoint of risk mitigation in addition to external factors that were considered for downside potential with regard to safety. Find- ings based on the evaluation stated that the

Bahamas environment is conducive to the operation of such a ferry service, and yet hazards still do exist which if not properly examined - could result in accidents - which could be fatal. The Risk Assess- ment led to various recommendations, such as the required installation of a Portable Pilot Unit, under- taking of enhanced training and that crew schedul- ing should take fatigue factors into account.

To ensure that proper safety measures are being taken, Hornblower Marine Services (HMS) speci- fied that installation of a Starlink DGPS system.

Both accurate and repeatable, this equipment suite offers an appropriate level of navigation enhance- ment - essential at high speed. Traditionally cou- pled with a laptop computer and the appropriate antennas, the Invicta 210M DGPS/Beacon Receiv- er provides an accurate navigation tool used by pilots for the transit and docking of ships. In the instance of M/V Bo Hengy, HMS matched the unit with an installed computer and flat screen display rather than a laptop. Utilizing Ocean PC marinized computers and a 15-in. high resolution flat screen display, placement of the display in an appropriate location on the dash of the vessel was an intricate consideration from an ergonomic standpoint.

Reconfiguration of the dash layout was required to offer the captain an accurate view from the screen.

Additional operating challenges included the building and commissioning of the vessel to the

High Speed Craft Code under the Bahamian Flag, fueling and resupply logistics, maintenance and repair, mooring and boarding ramps, as well as the vessel timetable and crew training.

Although Hornblower routinely collaborates with the U.S. Coast Guard on similar matters, the idea of operation under another administration offered additional challenges. The London office of the

BMA, along with Det Norske Veritas and the builder had detailed various critical issues with regard to the design, outfitting and construction of the vessel to the IMO High Speed Craft Code (HSC

Code). Keeping in mind a possible inclusion of a number of normally required components, such as a sprinkler system and SOLAS approved lifeboat and davit, both the vessel owners and builder sought an early approval.

In each case of variance from the HSC Code alter- native safety measures were proposed to provide a sufficient level equivalency for HSC Code require- ments. In some cases, the route geography and water temperature played a role.

As the vessel was in preparation for delivery, voy- age departure roadblocks with class certificates and registry were remedied and a High Speed Craft

Safety Certificate (Bahamas version) was adminis- tered - with special allowances agreed per the par- ties and agencies - which are noted on the certifi- cate. As a result, BMA issued the HSC Code required Permit to Operate. Early on during the

HSC Code compliance discussion that occurred with the BMA, the subject of safe manning and training levels came up. It was understood from the beginning that the agency would not consider the standard license issued in Nassau by the Port

Authority as acceptable for the operation of this new high-speed passenger vessel. Although the ser- vice was to be offered on a domestic route - known in the Bahamas as a "Home Trade" vessel - it was agreed that additional training and certification would be necessary. This would in turn satisfy the requirements of the flag, owners, underwriters and standards. In addition to the training program, HMS has deemed it a necessity to provide a high level of active support throughout the daily operation of the vessel. A set of standing orders were recently devel- oped to assure that Masters are operating the ves- sels on a consistent watch to watch basis.

Circle 196 on Reader Service Card

New reduced rates from the middle of the ocean. 11! t

On 1 October 1999, we cut the rates for many of our global voice, fax and data services using

Satcom-A®, Satcom-B®, Satcom-C®

Satcom-M® and MiniSat®, and expanded our country zones to give you even more watertight maritime communications. And

Telstra can save you more with free Internet access."

For a copy of Telstra's new reduced rates, call the Telstra 24-hour Customer Service Centre: +61 7 5490 9090 or

FREECALL " 1800 810 023* (Australia only)

Or e-mail us at: [email protected]

Interested in having your maritime communications reviewed free?

Find out how much you could save with a streamlined Telstra package.

INMARSAT^

Telstra Global Satellite.

We're in the same boat. (Jelstra

Inmarsat airtime charges apply. *A free call within Australia unless from a mobile phone, which will be charged at the applicable rate.

FREECALL not available from radio or Satcom terminals. "Registered trade mark and ™trade mark of Telstra Corporation Limited,

ACN 051 775 556. © Inmarsat and the Inmarsat logo are trade marks of Inmarsat, London, United Kingdom. TIN0079/E 31 Circle 235 on Reader Service Card