Page 32: of Maritime Reporter Magazine (April 1980)

SNAME Announces

Committee Chairmen

For 1980

Lester Rosenblatt, president of

The Society of Naval Architects and Marine Engineers, recently announced the following commit- tee chairmen for 1980:

Vice president—Advisory Pub- lic Service Committee—Donald P.

Courtsal, vice president and gen- eral manager, Dravo Corporation,

Engineering Works Division,

Pittsburgh, Pa.

Applications Committee — Ar- nold Stein, assistant to the pres- dent, M. Rosenblatt & Son, New

York, N.Y.

Awards Committee—Rear Adm.

Kenneth E. Wilson Jr., USN(ret),

Energy Venture Planning man- ager, Exxon Enterprises Inc.,

Florham Park, N.J.

Banquet Committee — Norman

R. Farmer, manager, Systems

Analysis Department, George G.

Sharp, Inc., New York, N.Y.

Budget and Endowments Com- mittee—William C. Freeman, con- sultant, Simsbury, Conn.

Dinner-Dance Committee —

James G. Price, vice president,

Norfolk Shipbuilding and Dry- dock Corp., Norfolk, Va.

Education Committee—William

E. Zimmie, president, Zimmite

Corporation, Cleveland, Ohio.

Fellows Committee — Prof.

Richard B. Couch, Department of

Naval Architecture and Marine

Engineering, The University of

Michigan, Ann Arbor, Mich. Hon- orary vice president of the Society.

Finance and Audit Committee—

John A. Livingston, chairman emeritus, Webb Institute of Na- val Architecture, Glen Cove, N.Y.

Journal of Ship Research Com- mittee—Ralph I). Cooper, head,

Fluid Dynamics Program, Office of Naval Research, Department of the Navy, Arlington, Va.

Marine Technology Committee —E. Scott Dillon, consultant, Sil- ver Spring, Md. Honorary vice president of the Society.

Member Insurance Committee—

Robert Axelrod, vice president- finance, J.J. Henry Co., Inc., New

York, N.Y. Treasurer of the So- ciety.

Membership Committee — Wil- liam H. Hunley, Technical Direc- tor, Naval Sea Systems Command,

Department of the Navy, Wash- ington, D.C.

Nominating Committee — Mon- roe D. Macpherson, John J. Mc-

Mullen Associates, Inc., New York,

N.Y. Vice president of the Society.

Papers Committee—Capt. Jack

A. Obermeyer, USN (ret.), man- ager, Marine Department, Texaco

Inc., White Plains, N.Y.

Pension Committee — Douglas

C. MacMillan, consultant, East

Orleans, Mass. Honorary vice president of the Society.

Publications Committee — Roy

L. Harrington, naval architect and technical manager, Newport News

Shipbuilding, Newport News, Va.

Scholarships Committee—Capt.

Robert E. Stark, USN (ret.),

Gibbs & Cox, Inc., New York, N.Y.

Sections Committee — Monroe

D. Macpherson, John J. McMullen

Associates, Inc., New York, N.Y.

Vice president of the Society.

Vice president-Technical and

Research—Capt. Richards T. Mil- ler, USN (ret.), (to whom the

Technical and Research Advance

Planning, the Technical and Re- search Finance and Administra- tion and the Technical and Re- search Steering Committees re- port), naval architect and con- sulting engineer, Annapolis, Md.

Technical and Research Ad- vance Planning Committee—Ron- ald K. Kiss, Director, Office of

Ship Construction, Maritime Ad- ministration, Washington, D.C.

Vice president of the Society.

Technical and Research Finance and Administration Committee—

John T. Gilbride, chairman, Todd

Shipyards Corporation, New York,

N.Y. Honorary vice president of the Society.

Technical and Research Steer- ing Committee—Rear Adm. Ran- dolph W. King, USN (ret.), ex- ecutive officer, National Academy of Engineering, Washington, D.C.

Hull Structure Committee —

Norman Hammer, Assistant to the Director, Maritime Adminis- tration, Washington, D.C.

Hydrodynamics Committee —

Prof. Lawrence W. Ward, profes-

PUSH/

PULL

POWER

Waukesha Bearing's Securing

Collar System brings power to ^^ your propeller installation, 31 securing and removal problems. '

The unique Waukesha design utilizes motor operated hydraulic pressure to push-on or pull-off your ship propeller using hydraulic pressures of less than 10,000 psi. With this kind of power, it's no wonder that propeller installa- tion or removal can be accomplished in a fraction of the time.

But time is not the only savings.

The Waukesha Securing Collar can be flush or recess mounted, which permits the tailshaft to terminate at the propeller hub. No longer is costly threading of the tailshaft necessary and the potential hazard of thread damage is eliminated. This also reduces the tailshaft length, making the securing collar ideal for installations where clearances aft of the hub are small. Discover all the reasons why over 100 vessels are equipped with the

Push/Pull power of the Waukesha Securing

Collar System. Call or write your Waukesha

Bearings Representative today and ask about our new W-21 Catalogue.

TO) WAUKESHA

S / BEARINGS CORPORATION

P.O. BOX 798

WAUKESHA, WISCONSIN 53186

A new line of inwater cleaning semi-automatic equipment for ship hulls

Phosmarine

BRUSH KART is a hydraulically powered brushing unit, fitted with three rotary sucking brushes. Cleaning proceeds by 4 ft. (1.20m) wide stripes at an operating speed of 33.44 yds (30.40m) both on vertical walls and flat bottoms. VLCCs can be cleaned within five to six hours during unloading, but only one diver who steers the Kart, effortless and with sufficient visibility. The driving ot the Kart requires only a few hours training of the operator, BRUSH KART is extremely robust and requires very limited maintenance. It ensures a high quality cleaning which spares the prqtective coatings

BRUSH KART is currently in use with the U.S. Navy and the NATO Navy

Every 'PHOSMARIN' equipment is manufactured in France only

FRANCE NORWAY GREECE HONG KONG BELGIUM GIBRALTAR

SPAIN ITALY SINGAPORE PHILIPPINES U.S.A. NOVOROSSISK

ODESSA SHARJAH DUBAI JAPAN CHILE CANARY ISLANDS

FOR FURTHER INFORMATION PLEASE APPLY TO:

PH0CEENNE S/MARINE SERVICE • PHOSMARIN EOUIPEMENT 21. BOUl DE PARIS • 13002 MARSEILLE (FRANCE! • TELE* 501826 PH0SMAR 34 ZIDELL Maritime Reporter/Engineering News

Building a new boat? ""MATTON r FIRST

Repairs • Conversions • Overhaul

TEXACO

Matton Shipyard Company. Inc offers complete facilities for all new construction of vessels up

U to 200 feet in length

For your next new vessel or repair job call Matton first.

MATTON

SHIPYARD.,

P 0 Box 645. Cohoes. New York 12047

Tel: (518) 237-3911