Page 26: of Maritime Reporter Magazine (February 15, 1981)

Read this page in Pdf, Flash or Html5 edition of February 15, 1981 Maritime Reporter Magazine

The "BEAVER"

Gets There First!

Jackup Rig For Foramer

Completed By Hitachi

NEW 650 KW DIESEL GENERATOR

ALLISON DETROIT DIESEL

MODEL 16V149

Schnitzer-Levin Marine

Company

San Francisco (415) 741-0993

TWX 910-371-7248 445 Littlefield Avenue (Box 2445)

South San Francisco, CA 94080

New York (212) 832-3330

DELCO GENERATOR

HYDRAULIC START

ABS CERTIFICATED 450 VOLT — 60 HERTZ

A jackup offshore drilling rig, the lie du

Levant (shown above), was completed re- cently at the Ariake Works of Hitachi Zosen in Japan. The cantilever type rig will be op- erated by Foramer S.A. of France. Follow- ing delivery, the rig was towed to Abu

Dhabi, where it was scheduled to begin drilling in late January. lie du Levant is the first Drill Hope (C-150) rig to be completed to Hitachi's own standard design. Of the 17 drilling rigs ordered from Hitachi, this one is the ninth to be delivered and the fourth to be con- structed at the Ariake Works.

Hitachi's standard Drilling Hope design rig is compact in size and light in weight, making it economical to construct. Two ad- ditional rigs of the same design are now under construction at the Osaka Works of

Hitachi.

Under normal usage, this rig can drill to a depth of 19,685 feet and operate in water depths up to 150 feet. The rig's spud tank is designed so that it is completely con- tained within the platform, with no projec- tion from the rig bottom. This construction allows the rig to be towed in shallow waters or to be lifted on a barge for transport.

The platform is 193.5 feet long, 173.9 feet wide, and 21.3 feet deep. Classed by Bureau

Veritas, the rig has accommodations for a maximum complement of 80 persons.

Recent Contracts For

McDermott Incorporated

Total $49 Million Plus

The McDermott Incorporated Shipyards

Group, with facilities in Morgan City and

New Iberia, La., and Gulfport, Miss., re- cently secured contracts totaling more than $49 million.

Included are the following: Phoenix Man- agement Corporation—one 210-foot by 54- foot posted drilling barge; Atlantic Pacific

Marine Corporation—two 210-foot by 54-foot posted drilling barges; Noble Drilling Corpo- ration—one 210-foot by 54-foot posted drill- ing barge; Mistoil Tub Corporation — one 126-foot 4,200-bhp tug; Coastwise Trading

Corporation — one 128-foot, 4,000-bhp tug; and Sea Level Boat Company—one 192-foot, 3,000-bhp supply vessel.

McDermott is a leading international en- ergy services company. The company and

Store it on Deck, on Dock, in Water or roll it on the Interstate.

Diesel / Gas or Outboard

We build 23 foot through 31 foot

Work Boats ... Customized to your requirements.

Heli-Arc Welded, Reinforced Aluminum Plate Hull 3/16" thick aluminum plate hull won't dry and crack in the sun.

Hoist it aboard, take it with you. it's at home on land or sea.

We'll custom build a "Beaver" for Diesel. Gas or Outboard power.

We'd like to quote on your special requirements: (516) 289-0621 Tom Carney (Pres.) 'TKaxitte Inc. o o o o o o o o o o o 37 Bransford Street, Patchogue, New York 11772 ° ooooooooooooooooooooooooooooooooooo

Comfort -Mate, I nc. " Quality Marine Furniture is our Business

Maintenance Free • Fabricators of Wood

Deck Furniture Aluminum, Steel,

Fiberglass & Formica • Maintenance Free n . r . • Complete line of Deck Equipment MJim |n(erior

Furniture

Send for additional information & catalog

Comfort-Mate, I nc

P.O. BOX 160845 MIAMI). FLORIDA 33116

Tel. 305-233-5626 • Cable: COMFRTMATE

Chabot.

The Source.

Canada's largest ship chandlery.

Meats and ail other provisions; galley, cabin, deck and engine supplies; bonded stores merchandise.

Open 24 hours a day, all week

MONTREAL - HALIFAX • QUEBEC CITY 5ARNIA - SAINT JOHN. N E 5490 NOTRE DAME STREET EAST. MONTREAL. QUEBEC H1N 2C4 (514) 253-2816 TELEX 05-829673

A MEMBER OF THE HALCO GROUP its subsidiaries provide engineering and con- struction services to the marine and offshore oil and gas industries, and manufacture steam generating equipment, tubular prod- ucts, insulating products, and automated machine tools.

Wall Shipyard Completed $11.5 Million In Vessel Repair

Work And Service In 1980

Wall Shipyard Inc. has announced $11.5 million worth of service to the maritime industry during 1980, an increase from $7 million in 1979, according to Charles W.

Wall Sr., president. He said that the ma- jority of his Harvey, La., shipyard's work comes from repairs to boats, barges, and rigs that navigate the inland waterways of the Gulf Coast, the Mississippi River and its tributaries. "What is significant about this work," said Mr. Wall, "is that 80 percent of it comes from firms outside Louisiana. So we're not talking about only local dollar turnover— this is new revenue for our local economy."

He added that he is proud to be a part of one of the greatest collections of marine re- pair facilities in the world, and to make such a significant contribution to the local economy.

About one-third of Wall's work comes from vessels and equipment serving the oil production industry. Five drydocks are in service presently at Wall, and a sixth is due for completion by the spring. These facil- ities are used for repairs to inland floating rigs, spud barges and dredges, crewboats and supply boats, and work barges that carry pipe and other equipment to offshore drilling sites.

Another third of Wall Shipyard's busi- ness is generated by the petroleum trans- porting industry. Wall's gas-freeing plant cleans barges of petroleum products to make them safe for repairs or for use for other products. The balance of Wall's business comes from those vessels involved in the transportation of agricultural products.

Wall is located on two plants in the Intra- coastal Waterway. The 14-acre Plant Num- ber 1 is the site of the drydocks, machine and propeller repair shops, and the office.

Plant Number 2, occupying 50 acres, is the location of the barge cleaning and gas-free- ing plant and topside repair facilities. This plant was placed into service in 1975 and is reserved for future expansion.

Reel-O-Matic Offers

Brochure On Handling

Flexible Products

A new brochure describing its full line of labor-saving equipment for handling flex- ible and coilable materials including cable, wire rope, hose, tubing, wire, steel, and other flexible products is now available from Reel-

O-Matic Systems, Inc. of Wrightsville, Pa.

The 36-page brochure covers shaftless take- up machines, fixed and mobile coiling rigs, respooling equipment, and a turntable that handles broken reels. Photographs of each item are accompanied by design highlights, capacities, and cartoons that illustrate typ- ical material-handling problems solved by each product. A price list is also included.

For further information and a free copy of the brochure,

Write 73 on Reader Service Card 28 Maritime Reporter/Engineering News

Maritime Reporter

First published in 1881 Maritime Reporter is the world's largest audited circulation publication serving the global maritime industry.