Page 27: of Maritime Reporter Magazine (October 1983)

WORTHINGTON 16" X 14" X 18"

VERTICAL DUPLEX STRIPPING PUMP 1400 GPM @ 110 PSI - suction lift 11.5 ft. — steam back pres- sure 15 lbs. 14" Suction—10" discharge — 2Vi" steam — 4" exhaust. Overall width 6'8" — overall height 9' 1 — depth 3W. Wt. approx. 10,000 lbs.

RECONDITIONED 1980

ABS-READY TO GO

NEW U.S. MARAD-TYPE

AXIAL FLOW FANS (3) 10,500 CFM Model AF-100, "Baldor" 5 HP motor — 440/3/60 - 40° - 1750 RPM - 7 amps. (2) 40,665 CFM - size 43AF - 60 HP Baldor Motor - 440/3/60 - 1760 RPM - 75 amps - 50° rise - Frame 364TZ Ins. F

NEW NAVY 12,000 CFM

EXPLOSION PROOF

AXIAL FLOW FANS

Model A12A4X6 with 10/3 HP 2 speed motor. 7x12 10,000 LB AH&D

CARGO WINCHES 2-Speed — single drum — reverse throttle operation.

LINE PULL: low gear 10,000 lbs — high gear 5,000.

LINE SPEED: low gear 125 FPM based on 1st layer of 7/8" diam. rope — high gear 250 FPM based on 1st layer of 5/8" diam. rope. DRUM: 26" diam. — 20" long — 26" flange diam. Rope capacity of drum: 7/8" diam. rope in 6 layers — 650'; 5/8" diam: rope in 8 layers 1200'. Steam pressure at throttle 115 lbs. Oper- ating weight 6450 lbs.

NEW CHOCKS-CLEATS-BITTS

CAST STEEL

OPEN CHOCKS

Overall length 2' 33A" — top opening 6" — width 9" >r-i< 36" - 42" - 48" KEVEL CHOCKS 10" DOUBLE POLE BITTS 50 HP VARIABLE SPEED

ELECTRO-HYDRAULIC

SINGLE DRUM

CARGO WINCH with deck controls

SELF-CONTAINED WITH PUMP

MOTOR & RESERVOIR IN BASE

I M • - Jf jgj. 0

Made by Lakeshore. DUTY: 7400 lbs SLP - 220 FPM - drum size 24" diameter — 15" wide. Complete with ratchet & pawl. CAPACITY: 600 ft. of wire. MOTOR: 50 HP — 440 volts — 66.3 amps — 3-phase 60 cycle — squirrel cage — 1200 RPM constant — Frame CC-445-N — 1 hour duty. Motor drives Waterbury size 5 "A" end — size 5K heavy duty remote servo control 1150

RPM — WP 1900# - test 3000#. "B" End motor - type 5K heavy duty — size 5 1150 RPM. Originally built for U.S. Navy refueling at sea. AVAILABILITY: Some with double gypsy; some with single gypsy; some with no gypsys. Ex-U.S.N.

PLANS ON REQUEST

LARGE STEAM

TOWING ENGINE 9 X 10 TWIN ENGINE DRIVE

Air or Steam - 125/250 PSI

Heavy-duty Clyde with 36" diameter X 51" Face single drum. Flanges 68". CAPACITY: Up to 2800' of 2" wire rope. Normal line pull 40,000 lbs@ 50 FPM. Steam or air pressure required 125 to 250 PSI. Can be adapted to electric drive or increased steam or air pressure to a capacity of 82,000 lbs @ 20 FPM. Pawl holds 270,000 lb. pull from any layer. Equipped with level wind device. Approximate weight 30,000. DIMENSIONS: 12'6" wide—6'6" high. Write for details.

ALSO AVAILABLE

Large towing ring — 36" I.D. 900HP GM 12-567A

PORT DIESEL ENGINE

WITH FALK

REVERSE

AND

REDUCTION

GEAR

ENGINE: GM 12-567A-8V2 X 10-V-type-2-cycle-747

RPM — electric starting. GEAR: Falk AirFlex — reverse & reduction — 2.48:1 forward — 2.52:1 reverse.