Page 83: of Maritime Reporter Magazine (June 1985)

LIFE INSURANCE FOR METAL SURFACES

Goes On Damp surfaces • Goes Over Rust • Resists Exposure • Saves Time And Money!

HOW WETSALL WORKS

WETSALL penetrates rust and moisture and chemically bonds tight rust and firmly adher- ing paint to steel surfaces. It forces moisture out through the paint and forms a tough coating that stops further rusting. WETSALL's penetration is so effective that existing rust becomes an integral part of the coating.

WETSALL OFFERS OTHER

COST-SAtflHG ADVANTAGES

WETSALL is a fast drying coating that also performs well as a finish for up to 30 months.

It resists exposure to salt spray, ultraviolet rays, chemical and oil fumes and spillage, humidity and moisture.

WETSALL is compatible with conventional, alkyd, phenolic and oleoresinous paints, and acts as an excellent primer for these coatings, it is available in red (#3240), grey (#3241), black (#3242) and white (#3244).

WETSALL REQUIRES

LESS PREPARATION

WETSALL eliminates the need for dry surfaces. It also eliminates the need for costly sand or shot blasting to remove rust. Hand or power tools are all you need; WETSALL does the rest by pene trating the remaining surface rust and adhering to the steel below. it is not necessary to eliminate all evidence of rust but loose rust, mill scale, paint and blisters should be removed. Remove grease and oil with Farboil T-242, turpentine or mineral spirits.

WETSALL has excellent coverage.

One gallon of WETSALL will cover up to 400 sq. ft., depending on the condition of the surface.

Thanks to coverage, dura- bility and reduced pre- ps^^^ paration, this unique ^^^^^ formulation offers great savings in time ^^^^ and money

HOWTOOSrWETSALL

Since rust deposits have at least twice the mil thickness of an average coat of paint, a sufficient number of coats is required of

WETSALL to seal the surface and stop fur- ther rusting. If initial rusting is heavy, some superficial surface rust may exist after the first coat has dried. If this happens a light wire brushing and additional coats of WET-

SALL will correct the condition thoroughly saturating and properly sealing the rust.

COMPANY

Committed to your future . today.

Baltimore

HEAD OFFICE

Farboil Company 8200 Fischer Koad

Baltimore. MD 21222

Tel: (301)477-8200

Telex: WUI6849014

New York

Farboil Company 26 Broadway

Suite 1268

New York. NY 10004

Tel (212)344-2070

Telex: WUI 661850

New Orleans

Farboil Company 400 St Joseph St

P.O. Box 61980

New Orleans, LA 70161

Tel.: (504) 525-1307

Telex: 58-4224

June, 1985

Circle 311 on Reader Service Card 81