Page 61: of Maritime Reporter Magazine (March 1999)

of epoxy coatings, sealers and adhesives manufactured by Thin Film Technology,

Inc. (TFT). These epoxies are solvent- free and 100 percent solids containing

Kevlar microfibers to provide internal strength and chip/crack resistance. TFT epoxies can be applied to wet or damp surfaces (even underwater), such as those recently waterjetted clean. By coating before the surface is completely dry, flash rusting can be prevented.

BIO-STEP 185 is a ladder rung and stair coating which provides an anti-slip surface and minimizes heat transfer- ence. The epoxy coating does not trans- fer heat as effectively as metal rungs, resulting in a surface which is much cooler to touch — an important safety factor for crew escaping a fire.

Circle 50 on Reader Service Card

Marine-Friendly Bottom Paint Product

Of Asian Cooperation

A new bottom paint which does not cause marine pollution has been devel- oped by Ishikawajima-Harima Heavy

Industries Co. Ltd., Toyobo Co. Ltd, and

Nippon Paint Marine Coatings Co. Ltd. through financing from the Ship &

Ocean Foundation and The Nippon

Foundation. Natural substances such as a derivative of allium, lactic acid and malic acid take the place of convention- al components in antifouling agents and resins. The natural ingredients do not cause marine pollution as in time they decompose into C02 and H20 with the help of marine microorganisms. Tests are being performed to assess the effec- tiveness of the new paint.

Circle 75 on Reader Service Card

Rust Converting Primer

Corroseal from Corroseal, Inc. works by converting rust to magnetite — prim- ing metal for top coating without the need for extra maintenance to clean rust to white metal or sandblasting.

Preparation time for Corroseal using machine tools takes about one third as many labor hours as conventional metal primers. To solve the problem of visible rust and to stop loss of metal, Corroseal may be used for spot coating along with a normal top coat. The product is non- flammable, non-toxic, biodegradable and low in VOCs. Corroseal etch primes still-good old paint and can serve as an etch primer for most types of aluminum.

Circle 67 on Reader Service Card

Flexible Coating Stops Corrosion

Eureka Chemical Company produces

Fluid Film, a line of non-solvent base corrosion preventive coatings and lubri- cants that are applied to steel structure and parts. These products are used world-wide by commercial ships, mili-

March, 1999 63 tary ships, drillrigs and shipyards.

Common areas of use include topside maintenance, ballast tanks, interior of rudders and wire rope. Fluid Film sys- tems penetrate existing rust, displace water and form a durable film which does not harden or crack.

Circle 68 on Reader Service Card

Non-Toxic Hull Coating

Sound Specialty Coatings Corp. offers

Aquaply M, a non-toxic hull coating for boats and ships. The product contains no solvents, therefore wet mil. thickness is equal to its dry mil. thickness. The sys- tem will cure on wet or damp substrates and even under water. Aquaply M can last for up to five years, and can be applied on wood, metal and FRP sub- strates. It is available in both standard and custom colors. The company has also developed Prop*Coat, a two-part epoxy coating for propellers and run- ning gear.

Circle 69 on Reader Service Card

THE TOUGHEST MARINE

PRODUCTS FOR THE TOUGHEST

MARINE CONDITIONS.

When you need reliable performance, you need Intecolor.

We provide a full line of type approved computers and monitors that are built tough and built to last. Our big screen monitors and rugged computers are certified for applications in demanding shipboard environments.

Call (770) 623-9145, Ext. 2 to find out why major

Integrators and OEMs rely on

HI Intecolor marine products. They're built to perform under pressure. £9 Intecolor

Intecolor Corporation 2150 Boggs Road Duluth, Georgia 30096 (770) 623-9145 • Fax (770) 623-9163 web site: www.intecolor.com • E-mail: [email protected]

Intecolor Europe Amsterdamseweg 15, 1422 AC Uithoorn

The Netherlands 31 (297) 531 262 • Fax 31 (297) 531 424

Circle 240 on Reader Service Card

Thermax ® 7

INTERIOR JOINER WALL PANELS

SALES & DISTRIBUTION

Panel Specialists, Inc.

Thermax NA 3115 Range Road

Temple, TX 76504-1240, USA

Tel: (800) 947-9422 *USA only (254) 774-9800

Fax: (254) 774-7222

AROUND THE WORLD NAVAL ARCHITECTS, INTERIOR DECORATORS, MATERIAL SPECIFIERS, SHIP-

BUILDERS, JOINERS, AND CABINET MAKERS LOOK TO THERMAX FOR: • NON-COMBUSTIBLE marine construction boards meeting requirements of SOLAS and IMO resolutions • Marine fire rated construction boards for bulkheads, joiner panels, walls, double shell, and ceiling • Marine Regulatory Body Certification (USCG/UL, Canadian Coast Guard, UK DOT, Lloyds, DNV, etc.) • Excellent core material for marine furniture fabrication • Environmentally friendly construction material (no fibers, no formaldehydes, nontoxic) • Technical Support • Inventory in the USA ready for immediate shipment • Laminating services available • Metal profiles for bulkhead systems upon request • Design, production, and sales of marine products according to requirements of DIN ISO 9001 / EN 29001

SALES

Panel Specialists, Inc. (PSI) 13114 Dulaney Valley Road

Glen Arm, MD 21057-9601, USA

Tel: (800) 540-5503 *USA only (410) 592-8540

Fax: (410) 592-3185

ISO 9001

Registered and Certified

THERMAX • Subsidiary of ISOVOLTA AG • Austria

A Constantia Industrieholcling A.G. Company

Circle 317 on Reader Service Card