First Offshore LNG Deepwater Port Buoy Under Construction

ABS surveyors, onsite at Junoverken AB yard in Uddevalla, Sweden, monitor and inspect the fabrication of industry's first offshore LNG deepwater port buoy, designed by Advanced Production and Loading AS of Norway (APL).

The port buoy will be ABS-classed as an XA1 Single-Point Mooring (SPM).

APL has contracted ABS to provide classification services for its Submerged Turret Loading (STL) system, a singlepoint mooring system (SPM) and an integral component of the industry's first offshore LNG terminal, destined for the Gulf of Mexico, some 116 miles offshore Louisiana.

Dubbed the Energy Bridge Deepwater Port, the terminal system incorporates APL's STL technology commonly used in the offloading of oil in regions including the North Sea, offshore China and offshore Western Australia. The STL buoy, planned for installation on West Cameron Block 603 in 280 ft. of water.

is scheduled for transport to U.S. waters this November. First cargo for the Energy Bridge Deepwater Port is scheduled for January 2005, with planned capacity to deliver base load gas volumes in excess of 500 million cubic feet per day. The 186-ton STL unit will allow specially built LNG carriers fitted with onboard re-gasification equipment to transfer gas through the buoy, which is connected to a pipeline end manifold (PLEM) on the seafloor.

ABS' scope of work encompasses the submerged turret loading buoy; the mooring system for the buoy; and the riser to take the gas from the buoy to the PLEM.

Maritime Reporter Magazine, page 8,  Oct 2004 Louisiana

Read First Offshore LNG Deepwater Port Buoy Under Construction in Pdf, Flash or Html5 edition of October 2004 Maritime Reporter

Other stories from October 2004 issue

Content

Maritime Reporter

First published in 1881 Maritime Reporter is the world's largest audited circulation publication serving the global maritime industry.