Bollinger Completes Major Conversion of Ned Ferry
Bollinger Shipyards, Inc., has completed a major conversion of the Crescent Towing tug, Ned Ferry that transformed the boat from a single engine vessel with 3,500 hp, to a twin-engine vessel with 4,000 hp. It is the third of eight Crescent Towing 105-ft. (32 m) sister ships to undergo the same upgrades and modifications at Bollinger Algiers LLC, the New Orleans based repair and conversion shipyard facility.
Ned Ferry's old engine was replaced with a pair of Caterpillar 3512B engines coupled to Reintjes WAF673 reduction gears driving 83-in. Bollinger stainless steel propellers.
They were installed in 84-in. type 37 kort nozzles with stainless steel inner rings and leading and trailing edges. It has a 45-degree rudder angle for better maneuverability and its new power package is designed to generate 100,000 lbs. or 50 tons of bollard pull. The boat's stern was modified to accommodate the new propulsion system.
Bollinger has reconstructed the tug's wheelhouse with low profile stacks for maximum visibility and has installed new radars, GPS, depth sounders, hailers, VHF radios, fax machines, sound powered telephones, fuel emergency shut off systems, and remote control start and stops for the main engines.
New Coast Guard approved oil and water separators and sanitary systems have been installed and channel coolers were replaced with keel coolers. Living spaces and the galley were refurbished and new air conditioning and heating installed.
Mike Ellis, executive vice president and COO of Bollinger said, "This modernization project for Crescent Towing is similar to the U. S. Navy's SLEP (Service Life Extension Program) in which ships receive upgrades to their design as well as the installation of new leading edge machinery and electronic technologies. Executives at Crescent have told us their two other tugs, Louisiana and Florida (formerly Louise) that have already been converted, are performing beyond expectations. Conversions such as these extend the productive life of vessels while helping to keep their owners costs down without the higher costs of newbuilds." The G. Shelby Freiderichs, Mississippi, Margaret F.
Cooper, Texas and Glenn will follow the Ned Ferry.
Each measures 105-ft. long with a 26-ft. (7.9 m) beam and 13.5 ft. (4.1 m) depth. They were built in the late 1950s and early 1960s.
Read Bollinger Completes Major Conversion of Ned Ferry in Pdf, Flash or Html5 edition of October 2003 Maritime Reporter
Other stories from October 2003 issue
Content
- Blount Delivers 130-ft. CAT page: 10
- 10,850-HP AHTS Joins Seabulk Offshore Fleet page: 11
- Sibu: Ferries for Asia page: 12
- Grimaldi-Naples Launches RoRo Grande Amburgo page: 14
- U.S. Territorial Sea and Other Lines in the Water page: 16
- Varian, PARC Receive Security System Funding page: 22
- Wartsila to Concentrate on Marine and Service page: 22
- LPG Tanker Repaired, Modernized and Converted page: 24
- Financier Calls for a New Approach on Standards page: 26
- Bollinger Completes Major Conversion of Ned Ferry page: 27
- SENESCO Becomes Senesco Marine page: 28
- SPS Overlay: Fix Steel Decks Faster page: 30
- Team UMC Helps Navy Ship With Innovative VSP Switch page: 33
- B+V Reports Busy Repair Docks in August page: 34
- Extensive Fantasy Refurb page: 35
- New Tooling, Training Solutions Target Shipbuilding page: 36
- Dubai Drydocks Completes Conversions page: 38
- Solutions in Panama page: 38
- Insurer Not Liable for Repairs Beyond Warranty page: 39
- The Evolution of Marine Painting page: 40
- Grand Bahama Shipyard Receives Quality Mark page: 41
- Brunei Develops New Coating System page: 42
- New Marine Technology Set for Debut at Amsterdam Exhibition EURO PORT 2003 page: 46
- Gesilco: Built to last page: 48
- Radio Holland page: 51
- Nauticast AG page: 51
- Autoship Continues To Make Waves page: 54
- Maxsurf Links with ShipConstructor page: 54
- Provide Solutions Introduces 3D Laser Scanning page: 56
- Nupas-Cadmatic Offers Versatile Shipbuilding Applications page: 57
- ABS President Discusses Bulk Carrier Safety page: 58
- Integrity in a New Era page: 60
- More Power to the Dredgermen page: 60
- CNG Carrier One Step Closer page: 61
- JJMA on LSC Team page: 63
- A Legacy Spanning Three Generations page: 64
- World Maritime Tech Exhibition Set for San Francisco page: 66
- Juniper's Hinges Go Low and High page: 68
- Long Beach Pilots Go Far Out With New Boat page: 72
- Urethane's Products Are Thick-Skinned page: 76
- SES Launches "Smart" Solution page: 77
- BP's Shafts are Oil-Free page: 80
- Vosta Debuts Universal MK3 Bow Coupling Installation page: 81
- Safety Not Optional page: 81
- VENTIQ Offers Innovative Approach to Cargo Tank Venting page: 82
- Walform M Plus: Leak Free pipe connections page: 82
- Employees' Invention Improves Valve Process page: 83
- New High-Pressure Pumps page: 83