Tier III Marine Power: Genset with SCR
Rolls-Royce brand MTU and Fairplay Towage are set to test an MTU diesel genset with SCR exhaust after treatment in a harbor tug in order to verify compliance with IMO Tier III emission requirements that come into force as of 2016. According to the manufacturer, the nitrogen oxide (NO x) emissions will be cut by 90% compared with the IMO Tier I regulation that was introduced in 2000.
“This is one of the world’s first tests of high-speed diesel engines equipped with an SCR system designed to meet the NOx levels required by IMO Tier III,” said Dr. Michael Haidinger, Chief Sales Officer of Rolls-Royce Power Systems.
The new Fairplay tug with a bollard pull of 90 tons is currently being built in Spain at Astilleros Armon and is scheduled to go into service in the Port of Rotterdam as of 2015.
MTU is supplying the two main 16V 4000 M63L propulsion engines, each delivering 2,000 kW, a 16-cylinder 4000 M23F diesel genset rated at 1,520 kW, and the SCR system. The exhaust aftertreatment system, with selective catalytic reduction (SCR) technology, is connected to the diesel genset.
The tests on the Fairplay tug, which will run continuously for 10,000 hours, are designed to enable MTU to get ready for the series solution for IMO Tier III marine engines. As of 2016, newly built ships that operate in Emission Control Areas (ECA) in North American coastal waters and in the U.S. Caribbean will have to comply with the NO x limits specified in the IMO Tier III emission standards and the MARPOL Annex VI regulations of the International Maritime Organization.
Fairplay Towage with its registered office in Hamburg is one of Europe’s leading tugboat operators and operates a fleet of around 40 ships in Europe.
www.mtu-online.com
(As published in the November 2014 edition of Maritime Reporter & Engineering News - http://magazines.marinelink.com/Magazines/MaritimeReporter)
Other stories from November 2014 issue
Content
- Editorial: 75, 150 ... What’s in a Number? page: 6
- Is Glycerine the Next Marine Fuel? page: 16
- The Legal Consequences of 46 CFR Subchapter “M” page: 20
- Avoiding the Edges of the Sea page: 22
- Will Congress Pass Any Maritime Legislation in 2014? page: 26
- World’s Largest Containership First Tested at MARIN page: 30
- What’s All the Noise at IMO? page: 34
- From Security to Efficiency Modern Vessel Tracking page: 40
- Marine Insurance & the “Human Factor” page: 44
- Subsea Defense & the Changing Paradigm of Submarine Programs page: 48
- ZF Geared up for a Commerical Maritime Push page: 52
- Interview: Matthew Paxton, President, Shipbuilders Council Of America page: 58
- Offshore: Ulstein and the First U.S. Built X-Bow page: 66
- OilCraft’s TwinBow Challenge page: 74
- The McAllister Towing Legacy page: 76
- Denet Towing Repower Saves 20% in Fuel page: 92
- Eltorque Pushes into US Market page: 93
- AHTS Proves Strength on (in & through) Ice page: 94
- Kleven Orderbook Pumped up to $1.8b page: 96
- Z-Drive Use Spreads on US Inland Waterways page: 96
- Floating Production: Huge Opportunity for Shipyards, Manufacturers page: 98
- Special Vessels “Built by Flensburger” page: 100
- Danish Maritime Takes Center Stage page: 104
- Safety is Job One page: 110
- Focus: Heavy Duty Lifting page: 114
- Lifting Costa Concordia page: 118
- RV Sikuliaq: Modern Electric Propulsion & Power Management page: 122
- Talking Turbines with Bolsinger, VP at GE Marine page: 134
- DSME Returns for More Dual-Fuel Engines page: 138
- Volvo Penta Triple IPS and DP for New Fast Response Boat page: 138
- New Propulsion Couplings from Renold Hi-Tec page: 139
- Cummins Auxiliaries for New OSV page: 139
- Tier III Marine Power: Genset with SCR page: 140
- New Generation of Turbochargers page: 141
- Class Approval for Wärtsilä Steerable Thruster page: 142
- Cat, Deltamarin Develop Modular FPSO Power Unit page: 144
- WEG’s CFW11W Offers Higher Power page: 144
- John Deere Expands Tier 3 Engine Lineup page: 144
- Successful MTG Light Off for USS Zumwalt page: 145
- MJP Introduces Hybrid Waterject page: 145
- This is One, Big Specialty Valve page: 148
- DNV GL Updates Phast Software page: 148
- SGB 2000 Gyrocompass Class Approved page: 148
- B COOL A/S Acquires Memac page: 148
- Hatteland’s 20-inch Display page: 148
- New Cutting Machine from ESAB page: 148
- Shell Launches App to Track Marine Lube Orders page: 148
- Hempel Launches AvantGuard Primers page: 150
- Underwater Locator Beacons for VDR page: 150
- Automatic Lubrication System for Shell’s Prelude page: 150
- Livorsi Launches New Throttle Lineup page: 150
- Delta-Y Assembly for Offshore Oil Bulk Cement/Barite Piping Systems page: 150
- Cummins Debuts Mobile Tier 4 Generators page: 150
- New Heater Kits for Northern Sea Route Vessels page: 151
- New Plasma Cutting and Gouging System page: 151
- New Simulation Tool for Collision Reconstruction page: 151
- ACO Unveils New Plant for Upcoming Wastewater Rules page: 151
- Survitec Escape Slide for Norwegian Ferry page: 151
- New Rolling Bearing Grease from Klüber page: 151
- KO-LINK Towing Ring from Lankhorst Ropes page: 151
- New Gear Grease and Oils from Klüber page: 152
- Portable Fire Extinguishers page: 152
- Self-Leveling, Height Adjustable Chocks page: 152
- ESAB’s New Welding Wire page: 152
- PalmScope Video Inspection System page: 152
- J D Neuhaus Hydraulic Lifts page: 152
- Flow Control for Multi-pump Applications page: 152